/*
|
* (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
|
*
|
* (C) Copyright 2007-2011
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
* Tom Cubie <tangliang@allwinnertech.com>
|
*
|
* Configuration settings for the Allwinner sunxi series of boards.
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#ifndef _SUNXI_COMMON_CONFIG_H
|
#define _SUNXI_COMMON_CONFIG_H
|
|
#include <asm/arch/cpu.h>
|
#include <linux/stringify.h>
|
|
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
|
/*
|
* The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
|
* expense of restricting some features, so the regular machine id values can
|
* be used.
|
*/
|
# define CONFIG_MACH_TYPE_COMPAT_REV 0
|
#else
|
/*
|
* A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
|
* Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
|
* beyond the machine id check.
|
*/
|
# define CONFIG_MACH_TYPE_COMPAT_REV 1
|
#endif
|
|
#ifdef CONFIG_ARM64
|
#define CONFIG_BUILD_TARGET "u-boot.itb"
|
#endif
|
|
/* Serial & console */
|
#define CONFIG_SYS_NS16550_SERIAL
|
/* ns16550 reg in the low bits of cpu reg */
|
#define CONFIG_SYS_NS16550_CLK 24000000
|
#ifndef CONFIG_DM_SERIAL
|
# define CONFIG_SYS_NS16550_REG_SIZE -4
|
# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
|
# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
|
# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
|
# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
|
# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE
|
#endif
|
|
/* CPU */
|
#define COUNTER_FREQUENCY 24000000
|
|
/*
|
* The DRAM Base differs between some models. We cannot use macros for the
|
* CONFIG_FOO defines which contain the DRAM base address since they end
|
* up unexpanded in include/autoconf.mk .
|
*
|
* So we have to have this #ifdef #else #endif block for these.
|
*/
|
#ifdef CONFIG_MACH_SUN9I
|
#define SDRAM_OFFSET(x) 0x2##x
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */
|
#define CONFIG_SYS_TEXT_BASE 0x2a000000
|
/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
|
* since it needs to fit in with the other values. By also #defining it
|
* we get warnings if the Kconfig value mismatches. */
|
#define CONFIG_SPL_STACK_R_ADDR 0x2fe00000
|
#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000
|
#else
|
#define SDRAM_OFFSET(x) 0x4##x
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */
|
/* V3s do not have enough memory to place code at 0x4a000000 */
|
#ifndef CONFIG_MACH_SUN8I_V3S
|
#define CONFIG_SYS_TEXT_BASE 0x4a000000
|
#else
|
#define CONFIG_SYS_TEXT_BASE 0x42e00000
|
#endif
|
/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
|
* since it needs to fit in with the other values. By also #defining it
|
* we get warnings if the Kconfig value mismatches. */
|
#define CONFIG_SPL_STACK_R_ADDR 0x4fe00000
|
#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000
|
#endif
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
|
|
#ifdef CONFIG_SUNXI_HIGH_SRAM
|
/*
|
* The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
|
* slightly bigger. Note that it is possible to map the first 32 KiB of the
|
* A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
|
* undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
|
* the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
|
*/
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x10000
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */
|
#else
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x0
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */
|
#endif
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
#define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE
|
#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */
|
|
#ifdef CONFIG_AHCI
|
#define CONFIG_LIBATA
|
#define CONFIG_SCSI_AHCI
|
#define CONFIG_SCSI_AHCI_PLAT
|
#define CONFIG_SUNXI_AHCI
|
#define CONFIG_SYS_64BIT_LBA
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
CONFIG_SYS_SCSI_MAX_LUN)
|
#endif
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
#define CONFIG_CMDLINE_TAG
|
#define CONFIG_INITRD_TAG
|
#define CONFIG_SERIAL_TAG
|
|
#ifdef CONFIG_NAND_SUNXI
|
#define CONFIG_SYS_NAND_MAX_ECCPOS 1664
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
#define CONFIG_SYS_MAX_NAND_DEVICE 8
|
#endif
|
|
#ifdef CONFIG_SPL_SPI_SUNXI
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
|
#endif
|
|
/* mmc config */
|
#ifdef CONFIG_MMC
|
#define CONFIG_MMC_SUNXI_SLOT 0
|
#endif
|
|
#if defined(CONFIG_ENV_IS_IN_MMC)
|
#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */
|
#define CONFIG_SYS_MMC_MAX_DEVICE 4
|
#elif defined(CONFIG_ENV_IS_NOWHERE)
|
#define CONFIG_ENV_SIZE (128 << 10)
|
#endif
|
|
#ifndef CONFIG_MACH_SUN8I_V3S
|
/* 64MB of malloc() pool */
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20))
|
#else
|
/* 2MB of malloc() pool */
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20))
|
#endif
|
|
/*
|
* Miscellaneous configurable options
|
*/
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
|
|
/* standalone support */
|
#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
|
|
/* FLASH and environment organization */
|
|
#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */
|
#define CONFIG_SPL_BOARD_LOAD_IMAGE
|
#endif
|
|
#ifdef CONFIG_SUNXI_HIGH_SRAM
|
#define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */
|
#define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */
|
#ifdef CONFIG_ARM64
|
/* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
|
#define LOW_LEVEL_SRAM_STACK 0x00054000
|
#else
|
#define LOW_LEVEL_SRAM_STACK 0x00018000
|
#endif /* !CONFIG_ARM64 */
|
#else
|
#define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */
|
#define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */
|
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
|
#endif
|
|
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
|
|
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
|
|
|
/* I2C */
|
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
|
defined CONFIG_SY8106A_POWER
|
#endif
|
|
#if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
|
defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
|
defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
|
#define CONFIG_SYS_I2C_MVTWSI
|
#ifndef CONFIG_DM_I2C
|
#define CONFIG_SYS_I2C
|
#define CONFIG_SYS_I2C_SPEED 400000
|
#define CONFIG_SYS_I2C_SLAVE 0x7f
|
#endif
|
#endif
|
|
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
|
#define CONFIG_SYS_I2C_SOFT
|
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
|
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
|
/* We use pin names in Kconfig and sunxi_name_to_gpio() */
|
#define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda
|
#define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl
|
#ifndef __ASSEMBLY__
|
extern int soft_i2c_gpio_sda;
|
extern int soft_i2c_gpio_scl;
|
#endif
|
#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */
|
#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */
|
#else
|
#define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */
|
#define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */
|
#endif
|
|
/* PMU */
|
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
|
defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
|
defined CONFIG_SY8106A_POWER
|
#endif
|
|
#ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
|
#if CONFIG_CONS_INDEX == 1
|
#ifdef CONFIG_MACH_SUN9I
|
#define OF_STDOUT_PATH "/soc/serial@07000000:115200"
|
#else
|
#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200"
|
#endif
|
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
|
#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200"
|
#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
|
#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200"
|
#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
|
#define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200"
|
#else
|
#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
|
#endif
|
#endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
|
|
/* GPIO */
|
#define CONFIG_SUNXI_GPIO
|
|
#ifdef CONFIG_VIDEO
|
/*
|
* The amount of RAM to keep free at the top of RAM when relocating u-boot,
|
* to use as framebuffer. This must be a multiple of 4096.
|
*/
|
#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
|
|
/* Do we want to initialize a simple FB? */
|
#define CONFIG_VIDEO_DT_SIMPLEFB
|
|
#define CONFIG_VIDEO_SUNXI
|
|
#define CONFIG_VIDEO_LOGO
|
#define CONFIG_VIDEO_STD_TIMINGS
|
#define CONFIG_I2C_EDID
|
#define VIDEO_LINE_LEN (pGD->plnSizeX)
|
|
/* allow both serial and cfb console. */
|
/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
|
|
#endif /* CONFIG_VIDEO */
|
|
/* Ethernet support */
|
#ifdef CONFIG_SUNXI_EMAC
|
#define CONFIG_PHY_ADDR 1
|
#define CONFIG_MII /* MII PHY management */
|
#endif
|
|
#ifdef CONFIG_SUN7I_GMAC
|
#define CONFIG_PHY_ADDR 1
|
#define CONFIG_MII /* MII PHY management */
|
#define CONFIG_PHY_REALTEK
|
#endif
|
|
#ifdef CONFIG_USB_EHCI_HCD
|
#define CONFIG_USB_OHCI_NEW
|
#define CONFIG_USB_OHCI_SUNXI
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
|
#endif
|
|
#ifdef CONFIG_USB_MUSB_SUNXI
|
#define CONFIG_USB_MUSB_PIO_ONLY
|
#endif
|
|
#ifdef CONFIG_USB_MUSB_GADGET
|
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
#endif
|
|
#ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
|
#endif
|
|
#ifdef CONFIG_USB_KEYBOARD
|
#define CONFIG_PREBOOT
|
#endif
|
|
#define CONFIG_MISC_INIT_R
|
|
#ifndef CONFIG_SPL_BUILD
|
#include <config_distro_defaults.h>
|
|
#ifdef CONFIG_ARM64
|
/*
|
* Boards seem to come with at least 512MB of DRAM.
|
* The kernel should go at 512K, which is the default text offset (that will
|
* be adjusted at runtime if needed).
|
* There is no compression for arm64 kernels (yet), so leave some space
|
* for really big kernels, say 256MB for now.
|
* Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
|
* Align the initrd to a 2MB page.
|
*/
|
#define BOOTM_SIZE __stringify(0xa000000)
|
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000))
|
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))
|
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))
|
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))
|
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
|
|
#else
|
/*
|
* 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
|
* 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
|
* 1M script, 1M pxe and the ramdisk at the end.
|
*/
|
#ifndef CONFIG_MACH_SUN8I_V3S
|
#define BOOTM_SIZE __stringify(0xa000000)
|
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
|
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
|
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
|
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
|
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
|
#else
|
/*
|
* 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
|
* 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
|
* 1M script, 1M pxe and the ramdisk at the end.
|
*/
|
#define BOOTM_SIZE __stringify(0x2e00000)
|
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
|
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000))
|
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000))
|
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
|
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
|
#endif
|
#endif
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
"bootm_size=" BOOTM_SIZE "\0" \
|
"kernel_addr_r=" KERNEL_ADDR_R "\0" \
|
"fdt_addr_r=" FDT_ADDR_R "\0" \
|
"scriptaddr=" SCRIPT_ADDR_R "\0" \
|
"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
|
"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
|
|
#define DFU_ALT_INFO_RAM \
|
"dfu_alt_info_ram=" \
|
"kernel ram " KERNEL_ADDR_R " 0x1000000;" \
|
"fdt ram " FDT_ADDR_R " 0x100000;" \
|
"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
|
|
#ifdef CONFIG_MMC
|
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
|
#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
|
#define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
|
#else
|
#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
|
#endif
|
#else
|
#define BOOT_TARGET_DEVICES_MMC(func)
|
#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
|
#endif
|
|
#ifdef CONFIG_AHCI
|
#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
|
#else
|
#define BOOT_TARGET_DEVICES_SCSI(func)
|
#endif
|
|
#ifdef CONFIG_USB_STORAGE
|
#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
|
#else
|
#define BOOT_TARGET_DEVICES_USB(func)
|
#endif
|
|
/* FEL boot support, auto-execute boot.scr if a script address was provided */
|
#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
|
"bootcmd_fel=" \
|
"if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
|
"echo '(FEL boot)'; " \
|
"source ${fel_scriptaddr}; " \
|
"fi\0"
|
#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
|
"fel "
|
|
#define BOOT_TARGET_DEVICES(func) \
|
func(FEL, fel, na) \
|
BOOT_TARGET_DEVICES_MMC(func) \
|
BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
|
BOOT_TARGET_DEVICES_SCSI(func) \
|
BOOT_TARGET_DEVICES_USB(func) \
|
func(PXE, pxe, na) \
|
func(DHCP, dhcp, na)
|
|
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
|
#define BOOTCMD_SUNXI_COMPAT \
|
"bootcmd_sunxi_compat=" \
|
"setenv root /dev/mmcblk0p3 rootwait; " \
|
"if ext2load mmc 0 0x44000000 uEnv.txt; then " \
|
"echo Loaded environment from uEnv.txt; " \
|
"env import -t 0x44000000 ${filesize}; " \
|
"fi; " \
|
"setenv bootargs console=${console} root=${root} ${extraargs}; " \
|
"ext2load mmc 0 0x43000000 script.bin && " \
|
"ext2load mmc 0 0x48000000 uImage && " \
|
"bootm 0x48000000\0"
|
#else
|
#define BOOTCMD_SUNXI_COMPAT
|
#endif
|
|
#include <config_distro_bootcmd.h>
|
|
#ifdef CONFIG_USB_KEYBOARD
|
#define CONSOLE_STDIN_SETTINGS \
|
"preboot=usb start\0" \
|
"stdin=serial,usbkbd\0"
|
#else
|
#define CONSOLE_STDIN_SETTINGS \
|
"stdin=serial\0"
|
#endif
|
|
#ifdef CONFIG_VIDEO
|
#define CONSOLE_STDOUT_SETTINGS \
|
"stdout=serial,vga\0" \
|
"stderr=serial,vga\0"
|
#elif CONFIG_DM_VIDEO
|
#define CONFIG_SYS_WHITE_ON_BLACK
|
#define CONSOLE_STDOUT_SETTINGS \
|
"stdout=serial,vidconsole\0" \
|
"stderr=serial,vidconsole\0"
|
#else
|
#define CONSOLE_STDOUT_SETTINGS \
|
"stdout=serial\0" \
|
"stderr=serial\0"
|
#endif
|
|
#ifdef CONFIG_MTDIDS_DEFAULT
|
#define SUNXI_MTDIDS_DEFAULT \
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
|
#else
|
#define SUNXI_MTDIDS_DEFAULT
|
#endif
|
|
#ifdef CONFIG_MTDPARTS_DEFAULT
|
#define SUNXI_MTDPARTS_DEFAULT \
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
|
#else
|
#define SUNXI_MTDPARTS_DEFAULT
|
#endif
|
|
#define CONSOLE_ENV_SETTINGS \
|
CONSOLE_STDIN_SETTINGS \
|
CONSOLE_STDOUT_SETTINGS
|
|
#ifdef CONFIG_ARM64
|
#define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
|
#else
|
#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
|
#endif
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
CONSOLE_ENV_SETTINGS \
|
MEM_LAYOUT_ENV_SETTINGS \
|
DFU_ALT_INFO_RAM \
|
"fdtfile=" FDTFILE "\0" \
|
"console=ttyS0,115200\0" \
|
SUNXI_MTDIDS_DEFAULT \
|
SUNXI_MTDPARTS_DEFAULT \
|
BOOTCMD_SUNXI_COMPAT \
|
BOOTENV
|
|
#else /* ifndef CONFIG_SPL_BUILD */
|
#define CONFIG_EXTRA_ENV_SETTINGS
|
#endif
|
|
#endif /* _SUNXI_COMMON_CONFIG_H */
|
