/*
|
* Configuration settings for the Novena U-Boot.
|
*
|
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#ifndef __CONFIG_H
|
#define __CONFIG_H
|
|
/* System configurations */
|
#define CONFIG_MISC_INIT_R
|
#define CONFIG_KEYBOARD
|
|
#include <config_distro_defaults.h>
|
#include "mx6_common.h"
|
|
/* U-Boot Commands */
|
|
/* U-Boot general configurations */
|
|
/* U-Boot environment */
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
/*
|
* Environment is on MMC, starting at offset 512KiB from start of the card.
|
* Please place first partition at offset 1MiB from the start of the card
|
* as recommended by GNU/fdisk. See below for details:
|
* http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
|
*/
|
#ifdef CONFIG_CMD_MMC
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
#define CONFIG_ENV_OFFSET (512 * 1024)
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
#define CONFIG_ENV_OFFSET_REDUND \
|
(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
#endif
|
|
/* Booting Linux */
|
#define CONFIG_BOOTFILE "fitImage"
|
#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs"
|
#define CONFIG_HOSTNAME novena
|
|
/* Physical Memory Map */
|
#define CONFIG_NR_DRAM_BANKS 1
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
#define CONFIG_SYS_MEMTEST_START 0x10000000
|
#define CONFIG_SYS_MEMTEST_END 0x20000000
|
|
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
|
|
/* SPL */
|
#include "imx6_spl.h" /* common IMX6 SPL configuration */
|
|
/* Ethernet Configuration */
|
#ifdef CONFIG_CMD_NET
|
#define CONFIG_FEC_MXC
|
#define CONFIG_MII
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
#define CONFIG_ETHPRIME "FEC"
|
#define CONFIG_FEC_MXC_PHYADDR 0x7
|
#define CONFIG_ARP_TIMEOUT 200UL
|
#endif
|
|
/* I2C */
|
#define CONFIG_SYS_I2C
|
#define CONFIG_SYS_I2C_MXC
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
#define CONFIG_I2C_MULTI_BUS
|
#define CONFIG_I2C_MXC
|
#define CONFIG_SYS_I2C_SPEED 100000
|
#define CONFIG_SYS_SPD_BUS_NUM 0
|
|
/* I2C EEPROM */
|
#ifdef CONFIG_CMD_EEPROM
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
#define CONFIG_SYS_I2C_EEPROM_BUS 2
|
#endif
|
|
/* MMC Configs */
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
/* PCI express */
|
#ifdef CONFIG_CMD_PCI
|
#define CONFIG_PCI_SCAN_SHOW
|
#define CONFIG_PCIE_IMX
|
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
|
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
|
#endif
|
|
/* PMIC */
|
#define CONFIG_POWER
|
#define CONFIG_POWER_I2C
|
#define CONFIG_POWER_PFUZE100
|
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
|
|
/* SATA Configs */
|
#ifdef CONFIG_CMD_SATA
|
#define CONFIG_DWC_AHSATA
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
#define CONFIG_LBA48
|
#define CONFIG_LIBATA
|
#endif
|
|
/* UART */
|
#define CONFIG_MXC_UART
|
#define CONFIG_MXC_UART_BASE UART2_BASE
|
|
/* USB Configs */
|
#ifdef CONFIG_CMD_USB
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
#define CONFIG_MXC_USB_FLAGS 0
|
/* Gadget part */
|
#define CONFIG_USBD_HS
|
#define CONFIG_NETCONSOLE
|
#endif
|
|
/* Video output */
|
#ifdef CONFIG_VIDEO
|
#define CONFIG_VIDEO_IPUV3
|
#define CONFIG_VIDEO_BMP_RLE8
|
#define CONFIG_SPLASH_SCREEN
|
#define CONFIG_BMP_16BPP
|
#define CONFIG_VIDEO_LOGO
|
#define CONFIG_IPUV3_CLK 260000000
|
#define CONFIG_IMX_HDMI
|
#define CONFIG_IMX_VIDEO_SKIP
|
#endif
|
|
/* Extra U-Boot environment. */
|
#ifndef CONFIG_SPL_BUILD
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
"fdt_high=0xffffffff\0" \
|
"initrd_high=0xffffffff\0" \
|
"consdev=ttymxc1\0" \
|
"baudrate=115200\0" \
|
"bootdev=/dev/mmcblk0p1\0" \
|
"rootdev=/dev/mmcblk0p2\0" \
|
"netdev=eth0\0" \
|
"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
|
"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
|
"scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \
|
"ramdisk_addr_r=0x28000000\0" \
|
"fdt_addr_r=0x18000000\0" \
|
"fdtfile=imx6q-novena.dtb\0" \
|
"addcons=" \
|
"setenv bootargs ${bootargs} " \
|
"console=${consdev},${baudrate}\0" \
|
"addip=" \
|
"setenv bootargs ${bootargs} " \
|
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
|
"${netmask}:${hostname}:${netdev}:off\0" \
|
"addmisc=" \
|
"setenv bootargs ${bootargs} ${miscargs}\0" \
|
"addargs=run addcons addmisc\0" \
|
"mmcload=" \
|
"mmc rescan ; " \
|
"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
|
"netload=" \
|
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
|
"miscargs=nohlt panic=1\0" \
|
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
|
"nfsargs=" \
|
"setenv bootargs root=/dev/nfs rw " \
|
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
|
"mmc_mmc=" \
|
"run mmcload mmcargs addargs ; " \
|
"bootm ${kernel_addr_r}\0" \
|
"mmc_nfs=" \
|
"run mmcload nfsargs addip addargs ; " \
|
"bootm ${kernel_addr_r}\0" \
|
"net_mmc=" \
|
"run netload mmcargs addargs ; " \
|
"bootm ${kernel_addr_r}\0" \
|
"net_nfs=" \
|
"run netload nfsargs addip addargs ; " \
|
"bootm ${kernel_addr_r}\0" \
|
"update_sd_spl_filename=SPL\0" \
|
"update_sd_uboot_filename=u-boot.img\0" \
|
"update_sd_firmware=" /* Update the SD firmware partition */ \
|
"if mmc rescan ; then " \
|
"if dhcp ${update_sd_spl_filename} ; then " \
|
"mmc write ${loadaddr} 2 0x200 ; " \
|
"fi ; " \
|
"if dhcp ${update_sd_uboot_filename} ; then " \
|
"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
|
"fi ; " \
|
"fi\0" \
|
BOOTENV
|
|
#define BOOT_TARGET_DEVICES(func) \
|
func(MMC, mmc, 0) \
|
func(USB, usb, 0) \
|
func(SATA, sata, 0) \
|
func(PXE, pxe, na) \
|
func(DHCP, dhcp, na)
|
|
#include <config_distro_bootcmd.h>
|
|
#else
|
#define CONFIG_EXTRA_ENV_SETTINGS
|
#endif /* CONFIG_SPL_BUILD */
|
|
#endif /* __CONFIG_H */
|
