/*
|
* Copyright (C) 2014 Eukréa Electromatique
|
* Author: Eric Bénard <eric@eukrea.com>
|
*
|
* Configuration settings for the Embest RIoTboard
|
*
|
* based on mx6*sabre*.h which are :
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#ifndef __RIOTBOARD_CONFIG_H
|
#define __RIOTBOARD_CONFIG_H
|
|
#define CONFIG_MXC_UART_BASE UART2_BASE
|
#define CONSOLE_DEV "ttymxc1"
|
|
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
|
|
#define CONFIG_IMX_THERMAL
|
|
/* Size of malloc() pool */
|
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
|
|
#define CONFIG_MXC_UART
|
|
/* I2C Configs */
|
#define CONFIG_SYS_I2C
|
#define CONFIG_SYS_I2C_MXC
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
/* USB Configs */
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
/* MMC Configs */
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_FEC_MXC
|
#define CONFIG_MII
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
#define CONFIG_ETHPRIME "FEC"
|
#define CONFIG_FEC_MXC_PHYADDR 4
|
|
#define CONFIG_PHY_ATHEROS
|
|
#ifdef CONFIG_CMD_SF
|
#define CONFIG_MXC_SPI
|
#define CONFIG_SF_DEFAULT_BUS 0
|
#define CONFIG_SF_DEFAULT_CS 0
|
#define CONFIG_SF_DEFAULT_SPEED 20000000
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
#endif
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
#define CONFIG_SYS_MEMTEST_START 0x10000000
|
#define CONFIG_SYS_MEMTEST_END 0x10010000
|
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
|
|
/* Physical Memory Map */
|
#define CONFIG_NR_DRAM_BANKS 1
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
/* Environment organization */
|
#define CONFIG_ENV_SIZE (8 * 1024)
|
|
#if defined(CONFIG_ENV_IS_IN_MMC)
|
/* RiOTboard */
|
#define CONFIG_FDTFILE "imx6dl-riotboard.dtb"
|
#define CONFIG_SYS_FSL_USDHC_NUM 3
|
#define CONFIG_SYS_MMC_ENV_DEV 2 /* SDHC4 */
|
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
|
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
|
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
|
/* MarSBoard */
|
#define CONFIG_FDTFILE "imx6q-marsboard.dtb"
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
#define CONFIG_ENV_OFFSET (768 * 1024)
|
#define CONFIG_ENV_SECT_SIZE (8 * 1024)
|
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
#endif
|
|
/* Framebuffer */
|
#define CONFIG_VIDEO_IPUV3
|
#define CONFIG_VIDEO_BMP_RLE8
|
#define CONFIG_SPLASH_SCREEN
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
#define CONFIG_BMP_16BPP
|
#define CONFIG_VIDEO_LOGO
|
#define CONFIG_VIDEO_BMP_LOGO
|
#define CONFIG_IPUV3_CLK 260000000
|
#define CONFIG_IMX_HDMI
|
#define CONFIG_IMX_VIDEO_SKIP
|
|
#include <config_distro_defaults.h>
|
#include "mx6_common.h"
|
|
/* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
|
* 1M script, 1M pxe and the ramdisk at the end */
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
"bootm_size=0x10000000\0" \
|
"kernel_addr_r=0x12000000\0" \
|
"fdt_addr_r=0x13000000\0" \
|
"scriptaddr=0x13100000\0" \
|
"pxefile_addr_r=0x13200000\0" \
|
"ramdisk_addr_r=0x13300000\0"
|
|
#define BOOT_TARGET_DEVICES(func) \
|
func(MMC, mmc, 0) \
|
func(MMC, mmc, 1) \
|
func(MMC, mmc, 2) \
|
func(USB, usb, 0) \
|
func(PXE, pxe, na) \
|
func(DHCP, dhcp, na)
|
|
#define CONFIG_BOOTCOMMAND \
|
"run finduuid; " \
|
"run distro_bootcmd"
|
|
#include <config_distro_bootcmd.h>
|
|
#define CONSOLE_STDIN_SETTINGS \
|
"stdin=serial\0"
|
|
#define CONSOLE_STDOUT_SETTINGS \
|
"stdout=serial\0" \
|
"stderr=serial\0"
|
|
#define CONSOLE_ENV_SETTINGS \
|
CONSOLE_STDIN_SETTINGS \
|
CONSOLE_STDOUT_SETTINGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
CONSOLE_ENV_SETTINGS \
|
MEM_LAYOUT_ENV_SETTINGS \
|
"fdtfile=" CONFIG_FDTFILE "\0" \
|
"finduuid=part uuid mmc 0:1 uuid\0" \
|
BOOTENV
|
|
#endif /* __RIOTBOARD_CONFIG_H */
|
