/*
|
* U-Boot - Configuration file for Cirrus Logic EDB93xx boards
|
*/
|
|
#ifndef __CONFIG_H
|
#define __CONFIG_H
|
|
#ifdef CONFIG_MK_edb9301
|
#define CONFIG_EDB9301
|
#elif defined(CONFIG_MK_edb9302)
|
#define CONFIG_EDB9302
|
#elif defined(CONFIG_MK_edb9302a)
|
#define CONFIG_EDB9302A
|
#elif defined(CONFIG_MK_edb9307)
|
#define CONFIG_EDB9307
|
#elif defined(CONFIG_MK_edb9307a)
|
#define CONFIG_EDB9307A
|
#elif defined(CONFIG_MK_edb9312)
|
#define CONFIG_EDB9312
|
#elif defined(CONFIG_MK_edb9315)
|
#define CONFIG_EDB9315
|
#elif defined(CONFIG_MK_edb9315a)
|
#define CONFIG_EDB9315A
|
#else
|
#error "no board defined"
|
#endif
|
|
/* Initial environment and monitor configuration options. */
|
#define CONFIG_CMDLINE_TAG 1
|
#define CONFIG_INITRD_TAG 1
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
#define CONFIG_BOOTFILE "edb93xx.img"
|
|
#define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds"
|
|
#ifdef CONFIG_EDB9301
|
#define CONFIG_EP9301
|
#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301
|
#define CONFIG_ENV_SECT_SIZE 0x00020000
|
#elif defined(CONFIG_EDB9302)
|
#define CONFIG_EP9302
|
#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302
|
#define CONFIG_ENV_SECT_SIZE 0x00020000
|
#elif defined(CONFIG_EDB9302A)
|
#define CONFIG_EP9302
|
#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A
|
#define CONFIG_ENV_SECT_SIZE 0x00020000
|
#elif defined(CONFIG_EDB9307)
|
#define CONFIG_EP9307
|
#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307
|
#define CONFIG_ENV_SECT_SIZE 0x00040000
|
#elif defined(CONFIG_EDB9307A)
|
#define CONFIG_EP9307
|
#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A
|
#define CONFIG_ENV_SECT_SIZE 0x00020000
|
#elif defined(CONFIG_EDB9312)
|
#define CONFIG_EP9312
|
#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312
|
#define CONFIG_ENV_SECT_SIZE 0x00040000
|
#elif defined(CONFIG_EDB9315)
|
#define CONFIG_EP9315
|
#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315
|
#define CONFIG_ENV_SECT_SIZE 0x00040000
|
#elif defined(CONFIG_EDB9315A)
|
#define CONFIG_EP9315
|
#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A
|
#define CONFIG_ENV_SECT_SIZE 0x00020000
|
#else
|
#error "no board defined"
|
#endif
|
|
/* High-level configuration options */
|
#define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */
|
|
#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
|
|
/* Monitor configuration */
|
|
#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
|
|
/* Serial port hardware configuration */
|
#define CONFIG_PL010_SERIAL
|
#define CONFIG_CONS_INDEX 0
|
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, \
|
115200, 230400}
|
#define CONFIG_SYS_SERIAL0 0x808C0000
|
#define CONFIG_SYS_SERIAL1 0x808D0000
|
/*#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
|
(void *)CONFIG_SYS_SERIAL1} */
|
|
#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0}
|
|
/* Status LED */
|
/* Optional value */
|
|
/* Network hardware configuration */
|
#define CONFIG_DRIVER_EP93XX_MAC
|
#define CONFIG_MII_SUPPRESS_PREAMBLE
|
#define CONFIG_MII
|
#define CONFIG_PHY_ADDR 1
|
#undef CONFIG_NETCONSOLE
|
|
/* SDRAM configuration */
|
#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
|
defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
|
defined(CONFIG_EDB9315)
|
/*
|
* EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
|
* 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
|
* the SROMLL bit on the processor, resulting in this non-contiguous memory map.
|
*
|
* The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
|
* 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
|
* 64 MB of SDRAM.
|
*/
|
|
#define CONFIG_EDB93XX_SDCS3
|
|
#elif defined(CONFIG_EDB9302A) || \
|
defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
|
/*
|
* EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
|
* 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
|
* the SROMLL bit on the processor, resulting in this non-contiguous memory map.
|
*
|
* The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
|
* K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
|
*/
|
#define CONFIG_EDB93XX_SDCS0
|
|
#else
|
#error "no SDCS configuration for this board"
|
#endif
|
|
#if defined(CONFIG_EDB93XX_SDCS3)
|
#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Default load address */
|
#define PHYS_SDRAM_1 0x00000000
|
#elif defined(CONFIG_EDB93XX_SDCS0)
|
#define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* Default load address */
|
#define PHYS_SDRAM_1 0xc0000000
|
#endif
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
#define CONFIG_NR_DRAM_BANKS 8
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
(CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE)
|
|
/* Must match kernel config */
|
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
|
|
/* Run-time memory allocatons */
|
#define CONFIG_SYS_GBL_DATA_SIZE 128
|
|
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
|
|
/* -----------------------------------------------------------------------------
|
* FLASH and environment organization
|
*
|
* The EDB9301, EDB9302(a), EDB9307a, EDB9315a have 1 bank of flash memory at
|
* 0x60000000 consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit
|
* data bus, for a total of 16 MB of CFI-compatible flash.
|
*
|
* The EDB9307, EDB9312, and EDB9315 have 1 bank of flash memory at
|
* 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
|
* data bus, for a total of 32 MB of CFI-compatible flash.
|
*
|
*
|
* EDB9301/02(a)7a/15a EDB9307/12/15
|
* 0x60000000 - 0x0003FFFF u-boot u-boot
|
* 0x60040000 - 0x0005FFFF environment #1 environment #1
|
* 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued)
|
* 0x60080000 - 0x0009FFFF unused environment #2
|
* 0x600A0000 - 0x000BFFFF unused environment #2 (continued)
|
* 0x600C0000 - 0x00FFFFFF unused unused
|
* 0x61000000 - 0x01FFFFFF not present unused
|
*/
|
#define CONFIG_SYS_FLASH_CFI
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
#define CONFIG_FLASH_CFI_DRIVER
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
#define CONFIG_SYS_MAX_FLASH_SECT (256+8)
|
|
#define CONFIG_SYS_TEXT_BASE 0x60000000
|
#define PHYS_FLASH_1 CONFIG_SYS_TEXT_BASE
|
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
|
|
#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */
|
|
#define CONFIG_ENV_ADDR 0x60040000
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
#define CONFIG_USB_OHCI_NEW
|
#define CONFIG_USB_OHCI_EP93XX
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ep93xx-ohci"
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80020000
|
|
/* Define to disable flash configuration*/
|
/* #define CONFIG_EP93XX_NO_FLASH_CFG */
|
|
/* Define this for indusrial rated chips */
|
/* #define CONFIG_EDB93XX_INDUSTRIAL */
|
|
#endif /* !defined (__CONFIG_H) */
|
