/*
|
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
|
*
|
* Based on davinci_dvevm.h. Original Copyrights follow:
|
*
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#ifndef __CONFIG_H
|
#define __CONFIG_H
|
|
/*
|
* Board
|
*/
|
#define CONFIG_DRIVER_TI_EMAC
|
#define CONFIG_USE_SPIFLASH
|
#define CONFIG_SYS_USE_NAND
|
#define CONFIG_DRIVER_TI_EMAC_USE_RMII
|
#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
|
#define CONFIG_PREBOOT
|
|
/*
|
* SoC Configuration
|
*/
|
#define CONFIG_MACH_DAVINCI_DA850_EVM
|
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
|
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
|
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
|
#define CONFIG_SYS_OSCIN_FREQ 24000000
|
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
|
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
#define CONFIG_SYS_TEXT_BASE 0xc1080000
|
#define CONFIG_DA8XX_GPIO
|
|
/*
|
* Memory Info
|
*/
|
#define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */
|
#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
|
#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */
|
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
|
|
/* memtest start addr */
|
#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
|
|
/* memtest will be run on 16MB */
|
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
/*
|
* Serial Driver info
|
*/
|
#define CONFIG_SYS_NS16550_SERIAL
|
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
|
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
|
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
|
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
|
|
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
|
#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
|
/*
|
* I2C Configuration
|
*/
|
#define CONFIG_SYS_I2C
|
#define CONFIG_SYS_I2C_DAVINCI
|
#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
|
#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
|
|
/*
|
* Network & Ethernet Configuration
|
*/
|
#ifdef CONFIG_DRIVER_TI_EMAC
|
#define CONFIG_MII
|
#define CONFIG_BOOTP_DNS
|
#define CONFIG_BOOTP_DNS2
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
#define CONFIG_NET_RETRY_COUNT 10
|
#endif
|
|
#ifdef CONFIG_USE_SPIFLASH
|
#define CONFIG_ENV_SIZE (8 << 10)
|
#define CONFIG_ENV_OFFSET 0x80000
|
#define CONFIG_ENV_SECT_SIZE (64 << 10)
|
#endif
|
|
#if defined(CONFIG_VIDEO)
|
#define CONFIG_VIDEO_DA8XX
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
#define CONFIG_VIDEO_LOGO
|
#define CONFIG_VIDEO_BMP_RLE8
|
#define CONFIG_VIDEO_BMP_LOGO
|
#endif
|
|
/*
|
* U-Boot general configuration
|
*/
|
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
|
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
|
#define CONFIG_AUTO_COMPLETE
|
#define CONFIG_CMDLINE_EDITING
|
#define CONFIG_SYS_LONGHELP
|
#define CONFIG_MX_CYCLIC
|
|
/*
|
* Linux Information
|
*/
|
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
|
#define CONFIG_CMDLINE_TAG
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#ifdef CONFIG_CMD_BDI
|
#define CONFIG_CLOCKS
|
#endif
|
|
#ifndef CONFIG_DRIVER_TI_EMAC
|
#endif
|
|
/* NAND Setup */
|
#ifdef CONFIG_SYS_USE_NAND
|
#define CONFIG_SYS_NAND_PAGE_2K
|
#define CONFIG_SYS_NAND_NO_SUBPAGE
|
#define CONFIG_SYS_NAND_CS 2
|
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
|
#undef CONFIG_SYS_NAND_HW_ECC
|
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
|
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
#endif
|
|
/* SPI Flash */
|
#ifdef CONFIG_USE_SPIFLASH
|
#endif
|
|
#if !defined(CONFIG_SYS_USE_NAND) && \
|
!defined(CONFIG_USE_NOR) && \
|
!defined(CONFIG_USE_SPIFLASH)
|
#define CONFIG_ENV_SIZE (16 << 10)
|
#endif
|
|
/* additions for new relocation code, must added to all boards */
|
#define CONFIG_SYS_SDRAM_BASE 0xc0000000
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
|
GENERATED_GBL_DATA_SIZE)
|
/*
|
* Default environment and default scripts
|
* to update uboot and load kernel
|
*/
|
|
#define CONFIG_HOSTNAME ea20
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
"as=3\0" \
|
"netdev=eth0\0" \
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
"nfsroot=${serverip}:${rootpath}\0" \
|
"rfsbargs=setenv bootargs root=/dev/nfs rw " \
|
"nfsroot=${serverip}:${rfsbpath}\0" \
|
"testrfsargs=setenv bootargs root=/dev/nfs rw " \
|
"nfsroot=${serverip}:${testrfspath}\0" \
|
"ramargs=setenv bootargs root=/dev/ram rw initrd=" \
|
"0x${ramdisk_addr_r},4M\0" \
|
"mtdids=nand0=davinci_nand.0\0" \
|
"serverip=192.168.5.249\0" \
|
"ipaddr=192.168.5.248\0" \
|
"rootpath=/opt/eldk/arm\0" \
|
"splashpos=230,180\0" \
|
"testrfspath=/opt/eldk/test_arm\0" \
|
"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \
|
"ubi.mtd=${as} root=ubi0:rootfs\0" \
|
"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \
|
"ubi.mtd=${as} root=ubi0:rootfs\0" \
|
"addip_sta=setenv bootargs ${bootargs} " \
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
":${hostname}:${netdev}:off panic=1\0" \
|
"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
|
"addip=if test -n ${ipdyn};then run addip_dyn;" \
|
"else run addip_sta;fi\0" \
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
"addtty=setenv bootargs ${bootargs}" \
|
" console=${consoledev},${baudrate}n8\0" \
|
"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
|
"addmem=setenv bootargs ${bootargs} mem=${memory}\0" \
|
"consoledev=ttyS0\0" \
|
"loadaddr=c0000014\0" \
|
"memory=32M\0" \
|
"kernel_addr_r=c0700000\0" \
|
"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
|
"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
|
"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0" \
|
"flash_self=run ramargs addip addtty addmtd addmisc addmem;" \
|
"bootm ${kernel_addr_r}\0" \
|
"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \
|
"bootm ${kernel_addr}\0" \
|
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
"run nfsargs addip addtty addmtd addmisc addmem;" \
|
"bootm ${kernel_addr_r}\0" \
|
"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \
|
"run rfsbargs addip addtty addmtd addmisc addmem; " \
|
"bootm ${kernel_addr_r}\0" \
|
"net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
"run testrfsargs addip addtty addmtd addmisc addmem; " \
|
"bootm ${kernel_addr_r}\0" \
|
"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
|
"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
|
"nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
|
"ubifsload ${kernel_addr_r} /boot/uImage;" \
|
"ubifsumount; run nandargs addip addtty " \
|
"addmtd addmisc addmem;clrlogo;" \
|
"bootm ${kernel_addr_r}\0" \
|
"nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
|
"ubifsload ${kernel_addr_r} /boot/uImage;" \
|
"ubifsumount; run nandrwargs addip addtty " \
|
"addmtd addmisc addmem;clrlogo;" \
|
"bootm ${kernel_addr_r}\0" \
|
"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \
|
" addip addtty addmtd addmisc addmem;" \
|
"clrlogo;bootm ${kernel_addr_r}\0" \
|
"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
|
"load_magic=if sf probe 0;then sf " \
|
"read c0000000 0x10000 0x60000;fi\0" \
|
"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
|
"if ubifsload c0000014 /boot/u-boot.bin;" \
|
"then mw c0000008 ${filesize};else echo Error reading" \
|
" u-boot from nand!;fi\0" \
|
"load_net=if sf probe 0;then sf read c0000000 0x10000 " \
|
"0x60000;tftp c0000014 ${u-boot};" \
|
"mw c0000008 ${filesize};fi\0" \
|
"upd=if sf probe 0;then sf erase 10000 60000;" \
|
"sf write c0000000 10000 60000;fi\0" \
|
"ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \
|
"sf erase 0 10000;" \
|
"sf write 0xc0700000 0 ${filesize};fi\0" \
|
"ubootupd_net=if run load_net;then echo Updating u-boot;" \
|
"if run upd; then echo U-Boot updated;" \
|
"else echo Error updating u-boot !;" \
|
"echo Board without bootloader !!;" \
|
"fi;" \
|
"else echo U-Boot not downloaded..exiting;fi\0" \
|
"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \
|
"bootcmd=run net_testrfs\0"
|
|
#include <asm/arch/hardware.h>
|
|
#endif /* __CONFIG_H */
|
