/*
|
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#ifndef _CONFIG_SYNOLOGY_DS414_H
|
#define _CONFIG_SYNOLOGY_DS414_H
|
|
/*
|
* High Level Configuration Options (easy to change)
|
*/
|
#define CONFIG_DISPLAY_BOARDINFO_LATE
|
|
/*
|
* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
|
* for DDR ECC byte filling in the SPL before loading the main
|
* U-Boot into it.
|
*/
|
#define CONFIG_SYS_TEXT_BASE 0x00800000
|
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
|
|
/*
|
* Commands configuration
|
*/
|
|
/* I2C */
|
#define CONFIG_SYS_I2C
|
#define CONFIG_SYS_I2C_MVTWSI
|
#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
|
#define CONFIG_SYS_I2C_SLAVE 0x0
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
/* SPI NOR flash default params, used by sf commands */
|
#define CONFIG_SF_DEFAULT_SPEED 1000000
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
|
|
/* Environment in SPI NOR flash */
|
#define CONFIG_ENV_OFFSET 0x7E0000 /* RedBoot config partition in DTS */
|
#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
|
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
|
|
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
|
#define CONFIG_PHY_ADDR { 0x1, 0x0 }
|
#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
|
|
#define CONFIG_SYS_ALT_MEMTEST
|
|
/* PCIe support */
|
#ifndef CONFIG_SPL_BUILD
|
#define CONFIG_PCI_MVEBU
|
#define CONFIG_PCI_SCAN_SHOW
|
#endif
|
|
/* USB/EHCI/XHCI configuration */
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
/* FIXME: broken XHCI support
|
* Below defines should enable support for the two rear USB3 ports. Sadly, this
|
* does not work because:
|
* - xhci-pci seems to not support DM_USB, so with that enabled it is not
|
* found.
|
* - USB init fails, controller does not respond in time */
|
|
#if !defined(CONFIG_USB_XHCI_HCD)
|
#define CONFIG_EHCI_IS_TDI
|
#endif
|
|
/* why is this only defined in mv-common.h if CONFIG_DM is undefined? */
|
|
/*
|
* mv-common.h should be defined after CMD configs since it used them
|
* to enable certain macros
|
*/
|
#include "mv-common.h"
|
|
/*
|
* Memory layout while starting into the bin_hdr via the
|
* BootROM:
|
*
|
* 0x4000.4000 - 0x4003.4000 headers space (192KiB)
|
* 0x4000.4030 bin_hdr start address
|
* 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
|
* 0x4007.fffc BootROM stack top
|
*
|
* The address space between 0x4007.fffc and 0x400f.fff is not locked in
|
* L2 cache thus cannot be used.
|
*/
|
|
/* SPL */
|
/* Defines for SPL */
|
#define CONFIG_SPL_FRAMEWORK
|
#define CONFIG_SPL_TEXT_BASE 0x40004030
|
#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
|
|
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
|
#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
|
|
#ifdef CONFIG_SPL_BUILD
|
#define CONFIG_SYS_MALLOC_SIMPLE
|
#endif
|
|
#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
|
#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
|
|
/* SPL related SPI defines */
|
#define CONFIG_SPL_SPI_LOAD
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
|
|
/* DS414 bus width is 32bits */
|
#define CONFIG_DDR_32BIT
|
|
/* Use random ethernet address if not configured */
|
#define CONFIG_LIB_RAND
|
#define CONFIG_NET_RANDOM_ETHADDR
|
|
/* Default Environment */
|
#define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm"
|
#define CONFIG_LOADADDR 0x80000
|
#undef CONFIG_PREBOOT /* override preboot for USB and SPI flash init */
|
#define CONFIG_PREBOOT "usb start; sf probe"
|
|
#endif /* _CONFIG_SYNOLOGY_DS414_H */
|
