/*
|
* (C) Copyright 2011
|
* Jason Cooper <u-boot@lakedaemon.net>
|
*
|
* Based on work by:
|
* Marvell Semiconductor <www.marvell.com>
|
* Written-by: Siddarth Gore <gores@marvell.com>
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#ifndef _CONFIG_DREAMPLUG_H
|
#define _CONFIG_DREAMPLUG_H
|
|
/*
|
* High Level Configuration Options (easy to change)
|
*/
|
#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
|
#define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
|
|
/*
|
* Commands configuration
|
*/
|
|
/*
|
* mv-plug-common.h should be defined after CMD configs since it used them
|
* to enable certain macros
|
*/
|
#include "mv-plug-common.h"
|
|
/*
|
* Environment variables configurations
|
*/
|
#ifdef CONFIG_SPI_FLASH
|
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
|
#endif
|
|
#ifdef CONFIG_CMD_SF
|
#define CONFIG_HARD_SPI 1
|
#define CONFIG_ENV_SPI_BUS 0
|
#define CONFIG_ENV_SPI_CS 0
|
#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
|
#endif
|
|
/*
|
* max 4k env size is enough, but in case of nand
|
* it has to be rounded to sector size
|
*/
|
#define CONFIG_ENV_SIZE 0x1000 /* 4k */
|
#define CONFIG_ENV_ADDR 0x100000
|
#define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
|
|
/*
|
* Default environment variables
|
*/
|
#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
|
"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
|
"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
|
"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
|
"bootm 0x6400000;"
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
"x_bootcmd_ethernet=ping 192.168.2.1\0" \
|
"x_bootcmd_usb=usb start\0" \
|
"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
|
"x_bootargs=console=ttyS0,115200\0" \
|
"x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
|
|
/*
|
* Ethernet Driver configuration
|
*/
|
#ifdef CONFIG_CMD_NET
|
#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
|
#define CONFIG_PHY_BASE_ADR 0
|
#endif /* CONFIG_CMD_NET */
|
|
/*
|
* SATA Driver configuration
|
*/
|
#ifdef CONFIG_MVSATA_IDE
|
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
|
#endif /*CONFIG_MVSATA_IDE*/
|
|
#endif /* _CONFIG_DREAMPLUG_H */
|
