/*
|
* Common board functions for siemens AT91SAM9G45 based boards
|
* (C) Copyright 2013 Siemens AG
|
*
|
* Based on:
|
* U-Boot file: include/configs/at91sam9m10g45ek.h
|
* (C) Copyright 2007-2008
|
* Stelian Pop <stelian@popies.net>
|
* Lead Tech Design <www.leadtechdesign.com>
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#ifndef __CONFIG_H
|
#define __CONFIG_H
|
|
#include <asm/hardware.h>
|
#include <linux/sizes.h>
|
|
/*
|
* Warning: changing CONFIG_SYS_TEXT_BASE requires
|
* adapting the initial boot program.
|
* Since the linker has to swallow that define, we must use a pure
|
* hex number here!
|
*/
|
|
#define CONFIG_SYS_TEXT_BASE 0x72000000
|
|
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
|
/* ARM asynchronous clock */
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
#define CONFIG_SETUP_MEMORY_TAGS
|
#define CONFIG_INITRD_TAG
|
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
|
|
/* general purpose I/O */
|
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
#define CONFIG_AT91_GPIO
|
#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
|
|
/* serial console */
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
/* LED */
|
#define CONFIG_AT91_LED
|
#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */
|
#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */
|
|
|
/*
|
* BOOTP options
|
*/
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
#define CONFIG_BOOTP_BOOTPATH
|
#define CONFIG_BOOTP_GATEWAY
|
#define CONFIG_BOOTP_HOSTNAME
|
|
/* SDRAM */
|
#define CONFIG_NR_DRAM_BANKS 1
|
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
|
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
(CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE)
|
|
/* NAND flash */
|
#ifdef CONFIG_CMD_NAND
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
#define CONFIG_SYS_NAND_DBW_8
|
/* our ALE is AD21 */
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
/* our CLE is AD22 */
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
|
#endif
|
|
/* Ethernet */
|
#define CONFIG_MACB
|
#define CONFIG_RMII
|
#define CONFIG_NET_RETRY_COUNT 20
|
#define CONFIG_AT91_WANTS_COMMON_PHY
|
|
/* DFU class support */
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M)
|
#define DFU_MANIFEST_POLL_TIMEOUT 25000
|
|
#define CONFIG_SYS_LOAD_ADDR ATMEL_BASE_CS6
|
|
/* bootstrap + u-boot + env in nandflash */
|
#define CONFIG_ENV_OFFSET 0x100000
|
#define CONFIG_ENV_OFFSET_REDUND 0x180000
|
#define CONFIG_ENV_SIZE SZ_128K
|
|
#define CONFIG_BOOTCOMMAND \
|
"nand read 0x70000000 0x200000 0x300000;" \
|
"bootm 0x70000000"
|
|
#define CONFIG_SYS_LONGHELP
|
#define CONFIG_CMDLINE_EDITING
|
#define CONFIG_AUTO_COMPLETE
|
|
/*
|
* Size of malloc() pool
|
*/
|
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
|
SZ_4M, 0x1000)
|
|
/* Defines for SPL */
|
#define CONFIG_SPL_FRAMEWORK
|
#define CONFIG_SPL_TEXT_BASE 0x300000
|
#define CONFIG_SPL_MAX_SIZE (12 * SZ_1K)
|
#define CONFIG_SPL_STACK (SZ_16K)
|
|
#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE
|
#define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K)
|
|
#define CONFIG_SPL_NAND_DRIVERS
|
#define CONFIG_SPL_NAND_BASE
|
#define CONFIG_SPL_NAND_ECC
|
#define CONFIG_SPL_NAND_RAW_ONLY
|
#define CONFIG_SPL_NAND_SOFTECC
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K)
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
#define CONFIG_SYS_NAND_ECCSIZE 256
|
#define CONFIG_SYS_NAND_ECCBYTES 3
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
|
48, 49, 50, 51, 52, 53, 54, 55, \
|
56, 57, 58, 59, 60, 61, 62, 63, }
|
|
#define CONFIG_SPL_ATMEL_SIZE
|
#define CONFIG_SYS_MASTER_CLOCK 132096000
|
#define AT91_PLL_LOCK_TIMEOUT 1000000
|
#define CONFIG_SYS_AT91_PLLA 0x20c73f03
|
#define CONFIG_SYS_MCKR 0x1301
|
#define CONFIG_SYS_MCKR_CSS 0x1302
|
|
#endif
|
