/* 
 | 
 * (C) Copyright 2007-2008 
 | 
 * Stelian Pop <stelian@popies.net> 
 | 
 * Lead Tech Design <www.leadtechdesign.com> 
 | 
 * 
 | 
 * Configuation settings for the AT91SAM9261EK board. 
 | 
 * 
 | 
 * SPDX-License-Identifier:    GPL-2.0+ 
 | 
 */ 
 | 
  
 | 
#ifndef __CONFIG_H 
 | 
#define __CONFIG_H 
 | 
  
 | 
/* ARM asynchronous clock */ 
 | 
#define CONFIG_SYS_AT91_SLOW_CLOCK    32768        /* slow clock xtal */ 
 | 
#define CONFIG_SYS_AT91_MAIN_CLOCK    18432000    /* 18.432 MHz crystal */ 
 | 
  
 | 
#ifdef CONFIG_AT91SAM9G10 
 | 
#define CONFIG_AT91SAM9G10EK        /* It's an Atmel AT91SAM9G10 EK*/ 
 | 
#else 
 | 
#define CONFIG_AT91SAM9261EK        /* It's an Atmel AT91SAM9261 EK*/ 
 | 
#endif 
 | 
  
 | 
#include <asm/hardware.h> 
 | 
  
 | 
#define CONFIG_CMDLINE_TAG        /* enable passing of ATAGs */ 
 | 
#define CONFIG_SETUP_MEMORY_TAGS 
 | 
#define CONFIG_INITRD_TAG 
 | 
  
 | 
#define CONFIG_SKIP_LOWLEVEL_INIT 
 | 
  
 | 
#define CONFIG_ATMEL_LEGACY 
 | 
#define CONFIG_SYS_TEXT_BASE        0x21f00000 
 | 
  
 | 
/* 
 | 
 * Hardware drivers 
 | 
 */ 
 | 
  
 | 
/* LCD */ 
 | 
#define LCD_BPP                LCD_COLOR8 
 | 
#define CONFIG_LCD_LOGO 
 | 
#undef LCD_TEST_PATTERN 
 | 
#define CONFIG_LCD_INFO 
 | 
#define CONFIG_LCD_INFO_BELOW_LOGO 
 | 
#define CONFIG_ATMEL_LCD 
 | 
#ifdef CONFIG_AT91SAM9261EK 
 | 
#define CONFIG_ATMEL_LCD_BGR555 
 | 
#endif 
 | 
  
 | 
/* 
 | 
 * BOOTP options 
 | 
 */ 
 | 
#define CONFIG_BOOTP_BOOTFILESIZE 
 | 
#define CONFIG_BOOTP_BOOTPATH 
 | 
#define CONFIG_BOOTP_GATEWAY 
 | 
#define CONFIG_BOOTP_HOSTNAME 
 | 
  
 | 
/* SDRAM */ 
 | 
#define CONFIG_NR_DRAM_BANKS        1 
 | 
#define CONFIG_SYS_SDRAM_BASE        0x20000000 
 | 
#define CONFIG_SYS_SDRAM_SIZE        0x04000000 
 | 
#define CONFIG_SYS_INIT_SP_ADDR \ 
 | 
    (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE) 
 | 
  
 | 
/* NAND flash */ 
 | 
#ifdef CONFIG_CMD_NAND 
 | 
#define CONFIG_SYS_MAX_NAND_DEVICE        1 
 | 
#define CONFIG_SYS_NAND_BASE            0x40000000 
 | 
#define CONFIG_SYS_NAND_DBW_8 
 | 
/* our ALE is AD22 */ 
 | 
#define CONFIG_SYS_NAND_MASK_ALE        (1 << 22) 
 | 
/* our CLE is AD21 */ 
 | 
#define CONFIG_SYS_NAND_MASK_CLE        (1 << 21) 
 | 
#define CONFIG_SYS_NAND_ENABLE_PIN        AT91_PIN_PC14 
 | 
#define CONFIG_SYS_NAND_READY_PIN        AT91_PIN_PC15 
 | 
  
 | 
#endif 
 | 
  
 | 
/* Ethernet */ 
 | 
#define CONFIG_DRIVER_DM9000 
 | 
#define CONFIG_DM9000_BASE        0x30000000 
 | 
#define DM9000_IO            CONFIG_DM9000_BASE 
 | 
#define DM9000_DATA            (CONFIG_DM9000_BASE + 4) 
 | 
#define CONFIG_DM9000_USE_16BIT 
 | 
#define CONFIG_DM9000_NO_SROM 
 | 
#define CONFIG_NET_RETRY_COUNT        20 
 | 
#define CONFIG_RESET_PHY_R 
 | 
  
 | 
/* USB */ 
 | 
#define CONFIG_USB_ATMEL 
 | 
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB 
 | 
#define CONFIG_USB_OHCI_NEW 
 | 
#define CONFIG_SYS_USB_OHCI_CPU_INIT 
 | 
#define CONFIG_SYS_USB_OHCI_REGS_BASE        0x00500000    /* AT91SAM9261_UHP_BASE */ 
 | 
#ifdef CONFIG_AT91SAM9G10EK 
 | 
#define CONFIG_SYS_USB_OHCI_SLOT_NAME        "at91sam9g10" 
 | 
#else 
 | 
#define CONFIG_SYS_USB_OHCI_SLOT_NAME        "at91sam9261" 
 | 
#endif 
 | 
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS    2 
 | 
  
 | 
#define CONFIG_SYS_LOAD_ADDR            0x22000000    /* load address */ 
 | 
  
 | 
#define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE 
 | 
#define CONFIG_SYS_MEMTEST_END            0x23e00000 
 | 
  
 | 
#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 
 | 
  
 | 
/* bootstrap + u-boot + env + linux in dataflash on CS0 */ 
 | 
#define CONFIG_ENV_OFFSET    0x4200 
 | 
#define CONFIG_ENV_SIZE        0x4200 
 | 
#define CONFIG_ENV_SECT_SIZE    0x210 
 | 
#define CONFIG_ENV_SPI_MAX_HZ    15000000 
 | 
#define CONFIG_BOOTCOMMAND    "sf probe 0; " \ 
 | 
                "sf read 0x22000000 0x84000 0x294000; " \ 
 | 
                "bootm 0x22000000" 
 | 
  
 | 
#elif CONFIG_SYS_USE_DATAFLASH_CS3 
 | 
  
 | 
/* bootstrap + u-boot + env + linux in dataflash on CS3 */ 
 | 
#define CONFIG_ENV_OFFSET    0x4200 
 | 
#define CONFIG_ENV_SIZE        0x4200 
 | 
#define CONFIG_ENV_SECT_SIZE    0x210 
 | 
#define CONFIG_ENV_SPI_MAX_HZ    15000000 
 | 
#define CONFIG_BOOTCOMMAND    "sf probe 0:3; " \ 
 | 
                "sf read 0x22000000 0x84000 0x294000; " \ 
 | 
                "bootm 0x22000000" 
 | 
  
 | 
#else /* CONFIG_SYS_USE_NANDFLASH */ 
 | 
  
 | 
/* bootstrap + u-boot + env + linux in nandflash */ 
 | 
#define CONFIG_ENV_OFFSET        0x120000 
 | 
#define CONFIG_ENV_OFFSET_REDUND    0x100000 
 | 
#define CONFIG_ENV_SIZE        0x20000        /* 1 sector = 128 kB */ 
 | 
#define CONFIG_BOOTCOMMAND    "nand read 0x22000000 0x200000 0x300000; bootm" 
 | 
#endif 
 | 
  
 | 
#define CONFIG_SYS_LONGHELP 
 | 
#define CONFIG_CMDLINE_EDITING 
 | 
#define CONFIG_AUTO_COMPLETE 
 | 
  
 | 
/* 
 | 
 * Size of malloc() pool 
 | 
 */ 
 | 
#define CONFIG_SYS_MALLOC_LEN        ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 
 | 
  
 | 
#endif 
 |