hc
2024-03-22 ac5f19e89dcbd5c7428fcc78a0d407c887564466
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * gpio-regulator.h
 *
 * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
 *
 * based on fixed.h
 *
 * Copyright 2008 Wolfson Microelectronics PLC.
 *
 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 *
 * Copyright (c) 2009 Nokia Corporation
 * Roger Quadros <ext-roger.quadros@nokia.com>
 */
 
#ifndef __REGULATOR_GPIO_H
#define __REGULATOR_GPIO_H
 
#include <linux/gpio/consumer.h>
 
struct regulator_init_data;
 
enum regulator_type;
 
/**
 * struct gpio_regulator_state - state description
 * @value:        microvolts or microamps
 * @gpios:        bitfield of gpio target-states for the value
 *
 * This structure describes a supported setting of the regulator
 * and the necessary gpio-state to achieve it.
 *
 * The n-th bit in the bitfield describes the state of the n-th GPIO
 * from the gpios-array defined in gpio_regulator_config below.
 */
struct gpio_regulator_state {
   int value;
   int gpios;
};
 
/**
 * struct gpio_regulator_config - config structure
 * @supply_name:    Name of the regulator supply
 * @enabled_at_boot:    Whether regulator has been enabled at
 *            boot or not. 1 = Yes, 0 = No
 *            This is used to keep the regulator at
 *            the default state
 * @startup_delay:    Start-up time in microseconds
 * @gflags:        Array of GPIO configuration flags for initial
 *            states
 * @ngpios:        Number of GPIOs and configurations available
 * @states:        Array of gpio_regulator_state entries describing
 *            the gpio state for specific voltages
 * @nr_states:        Number of states available
 * @regulator_type:    either REGULATOR_CURRENT or REGULATOR_VOLTAGE
 * @init_data:        regulator_init_data
 *
 * This structure contains gpio-voltage regulator configuration
 * information that must be passed by platform code to the
 * gpio-voltage regulator driver.
 */
struct gpio_regulator_config {
   const char *supply_name;
 
   unsigned enabled_at_boot:1;
   unsigned startup_delay;
 
   enum gpiod_flags *gflags;
   int ngpios;
 
   struct gpio_regulator_state *states;
   int nr_states;
 
   enum regulator_type type;
   struct regulator_init_data *init_data;
};
 
#endif