#!/bin/bash
|
# SPDX-License-Identifier: GPL-2.0
|
|
# End-to-end eBPF tunnel test suite
|
# The script tests BPF network tunnel implementation.
|
#
|
# Topology:
|
# ---------
|
# root namespace | at_ns0 namespace
|
# |
|
# ----------- | -----------
|
# | tnl dev | | | tnl dev | (overlay network)
|
# ----------- | -----------
|
# metadata-mode | native-mode
|
# with bpf |
|
# |
|
# ---------- | ----------
|
# | veth1 | --------- | veth0 | (underlay network)
|
# ---------- peer ----------
|
#
|
#
|
# Device Configuration
|
# --------------------
|
# Root namespace with metadata-mode tunnel + BPF
|
# Device names and addresses:
|
# veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay)
|
# tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200, IPv6: 1::22 (overlay)
|
#
|
# Namespace at_ns0 with native tunnel
|
# Device names and addresses:
|
# veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay)
|
# tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100, IPv6: 1::11 (overlay)
|
#
|
#
|
# End-to-end ping packet flow
|
# ---------------------------
|
# Most of the tests start by namespace creation, device configuration,
|
# then ping the underlay and overlay network. When doing 'ping 10.1.1.100'
|
# from root namespace, the following operations happen:
|
# 1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev.
|
# 2) Tnl device's egress BPF program is triggered and set the tunnel metadata,
|
# with remote_ip=172.16.1.200 and others.
|
# 3) Outer tunnel header is prepended and route the packet to veth1's egress
|
# 4) veth0's ingress queue receive the tunneled packet at namespace at_ns0
|
# 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet
|
# 6) Forward the packet to the overlay tnl dev
|
|
PING_ARG="-c 3 -w 10 -q"
|
ret=0
|
GREEN='\033[0;92m'
|
RED='\033[0;31m'
|
NC='\033[0m' # No Color
|
|
config_device()
|
{
|
ip netns add at_ns0
|
ip link add veth0 type veth peer name veth1
|
ip link set veth0 netns at_ns0
|
ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
|
ip netns exec at_ns0 ip link set dev veth0 up
|
ip link set dev veth1 up mtu 1500
|
ip addr add dev veth1 172.16.1.200/24
|
}
|
|
add_gre_tunnel()
|
{
|
# at_ns0 namespace
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE seq key 2 \
|
local 172.16.1.100 remote 172.16.1.200
|
ip netns exec at_ns0 ip link set dev $DEV_NS up
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
|
# root namespace
|
ip link add dev $DEV type $TYPE key 2 external
|
ip link set dev $DEV up
|
ip addr add dev $DEV 10.1.1.200/24
|
}
|
|
add_ip6gretap_tunnel()
|
{
|
|
# assign ipv6 address
|
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
|
ip netns exec at_ns0 ip link set dev veth0 up
|
ip addr add dev veth1 ::22/96
|
ip link set dev veth1 up
|
|
# at_ns0 namespace
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE seq flowlabel 0xbcdef key 2 \
|
local ::11 remote ::22
|
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
ip netns exec at_ns0 ip addr add dev $DEV_NS fc80::100/96
|
ip netns exec at_ns0 ip link set dev $DEV_NS up
|
|
# root namespace
|
ip link add dev $DEV type $TYPE external
|
ip addr add dev $DEV 10.1.1.200/24
|
ip addr add dev $DEV fc80::200/24
|
ip link set dev $DEV up
|
}
|
|
add_erspan_tunnel()
|
{
|
# at_ns0 namespace
|
if [ "$1" == "v1" ]; then
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE seq key 2 \
|
local 172.16.1.100 remote 172.16.1.200 \
|
erspan_ver 1 erspan 123
|
else
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE seq key 2 \
|
local 172.16.1.100 remote 172.16.1.200 \
|
erspan_ver 2 erspan_dir egress erspan_hwid 3
|
fi
|
ip netns exec at_ns0 ip link set dev $DEV_NS up
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
|
# root namespace
|
ip link add dev $DEV type $TYPE external
|
ip link set dev $DEV up
|
ip addr add dev $DEV 10.1.1.200/24
|
}
|
|
add_ip6erspan_tunnel()
|
{
|
|
# assign ipv6 address
|
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
|
ip netns exec at_ns0 ip link set dev veth0 up
|
ip addr add dev veth1 ::22/96
|
ip link set dev veth1 up
|
|
# at_ns0 namespace
|
if [ "$1" == "v1" ]; then
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE seq key 2 \
|
local ::11 remote ::22 \
|
erspan_ver 1 erspan 123
|
else
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE seq key 2 \
|
local ::11 remote ::22 \
|
erspan_ver 2 erspan_dir egress erspan_hwid 7
|
fi
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
ip netns exec at_ns0 ip link set dev $DEV_NS up
|
|
# root namespace
|
ip link add dev $DEV type $TYPE external
|
ip addr add dev $DEV 10.1.1.200/24
|
ip link set dev $DEV up
|
}
|
|
add_vxlan_tunnel()
|
{
|
# Set static ARP entry here because iptables set-mark works
|
# on L3 packet, as a result not applying to ARP packets,
|
# causing errors at get_tunnel_{key/opt}.
|
|
# at_ns0 namespace
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE \
|
id 2 dstport 4789 gbp remote 172.16.1.200
|
ip netns exec at_ns0 \
|
ip link set dev $DEV_NS address 52:54:00:d9:01:00 up
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
ip netns exec at_ns0 arp -s 10.1.1.200 52:54:00:d9:02:00
|
ip netns exec at_ns0 iptables -A OUTPUT -j MARK --set-mark 0x800FF
|
|
# root namespace
|
ip link add dev $DEV type $TYPE external gbp dstport 4789
|
ip link set dev $DEV address 52:54:00:d9:02:00 up
|
ip addr add dev $DEV 10.1.1.200/24
|
arp -s 10.1.1.100 52:54:00:d9:01:00
|
}
|
|
add_ip6vxlan_tunnel()
|
{
|
#ip netns exec at_ns0 ip -4 addr del 172.16.1.100 dev veth0
|
ip netns exec at_ns0 ip -6 addr add ::11/96 dev veth0
|
ip netns exec at_ns0 ip link set dev veth0 up
|
#ip -4 addr del 172.16.1.200 dev veth1
|
ip -6 addr add dev veth1 ::22/96
|
ip link set dev veth1 up
|
|
# at_ns0 namespace
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE id 22 dstport 4789 \
|
local ::11 remote ::22
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
ip netns exec at_ns0 ip link set dev $DEV_NS up
|
|
# root namespace
|
ip link add dev $DEV type $TYPE external dstport 4789
|
ip addr add dev $DEV 10.1.1.200/24
|
ip link set dev $DEV up
|
}
|
|
add_geneve_tunnel()
|
{
|
# at_ns0 namespace
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE \
|
id 2 dstport 6081 remote 172.16.1.200
|
ip netns exec at_ns0 ip link set dev $DEV_NS up
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
|
# root namespace
|
ip link add dev $DEV type $TYPE dstport 6081 external
|
ip link set dev $DEV up
|
ip addr add dev $DEV 10.1.1.200/24
|
}
|
|
add_ip6geneve_tunnel()
|
{
|
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
|
ip netns exec at_ns0 ip link set dev veth0 up
|
ip addr add dev veth1 ::22/96
|
ip link set dev veth1 up
|
|
# at_ns0 namespace
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE id 22 \
|
remote ::22 # geneve has no local option
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
ip netns exec at_ns0 ip link set dev $DEV_NS up
|
|
# root namespace
|
ip link add dev $DEV type $TYPE external
|
ip addr add dev $DEV 10.1.1.200/24
|
ip link set dev $DEV up
|
}
|
|
add_ipip_tunnel()
|
{
|
# at_ns0 namespace
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE \
|
local 172.16.1.100 remote 172.16.1.200
|
ip netns exec at_ns0 ip link set dev $DEV_NS up
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
|
# root namespace
|
ip link add dev $DEV type $TYPE external
|
ip link set dev $DEV up
|
ip addr add dev $DEV 10.1.1.200/24
|
}
|
|
add_ip6tnl_tunnel()
|
{
|
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
|
ip netns exec at_ns0 ip link set dev veth0 up
|
ip addr add dev veth1 ::22/96
|
ip link set dev veth1 up
|
|
# at_ns0 namespace
|
ip netns exec at_ns0 \
|
ip link add dev $DEV_NS type $TYPE \
|
local ::11 remote ::22
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
|
ip netns exec at_ns0 ip addr add dev $DEV_NS 1::11/96
|
ip netns exec at_ns0 ip link set dev $DEV_NS up
|
|
# root namespace
|
ip link add dev $DEV type $TYPE external
|
ip addr add dev $DEV 10.1.1.200/24
|
ip addr add dev $DEV 1::22/96
|
ip link set dev $DEV up
|
}
|
|
test_gre()
|
{
|
TYPE=gretap
|
DEV_NS=gretap00
|
DEV=gretap11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_gre_tunnel
|
attach_bpf $DEV gre_set_tunnel gre_get_tunnel
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: $TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: $TYPE"${NC}
|
}
|
|
test_ip6gre()
|
{
|
TYPE=ip6gre
|
DEV_NS=ip6gre00
|
DEV=ip6gre11
|
ret=0
|
|
check $TYPE
|
config_device
|
# reuse the ip6gretap function
|
add_ip6gretap_tunnel
|
attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
|
# underlay
|
ping6 $PING_ARG ::11
|
# overlay: ipv4 over ipv6
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
# overlay: ipv6 over ipv6
|
ip netns exec at_ns0 ping6 $PING_ARG fc80::200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: $TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: $TYPE"${NC}
|
}
|
|
test_ip6gretap()
|
{
|
TYPE=ip6gretap
|
DEV_NS=ip6gretap00
|
DEV=ip6gretap11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_ip6gretap_tunnel
|
attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
|
# underlay
|
ping6 $PING_ARG ::11
|
# overlay: ipv4 over ipv6
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
# overlay: ipv6 over ipv6
|
ip netns exec at_ns0 ping6 $PING_ARG fc80::200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: $TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: $TYPE"${NC}
|
}
|
|
test_erspan()
|
{
|
TYPE=erspan
|
DEV_NS=erspan00
|
DEV=erspan11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_erspan_tunnel $1
|
attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: $TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: $TYPE"${NC}
|
}
|
|
test_ip6erspan()
|
{
|
TYPE=ip6erspan
|
DEV_NS=ip6erspan00
|
DEV=ip6erspan11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_ip6erspan_tunnel $1
|
attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel
|
ping6 $PING_ARG ::11
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: $TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: $TYPE"${NC}
|
}
|
|
test_vxlan()
|
{
|
TYPE=vxlan
|
DEV_NS=vxlan00
|
DEV=vxlan11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_vxlan_tunnel
|
attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: $TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: $TYPE"${NC}
|
}
|
|
test_ip6vxlan()
|
{
|
TYPE=vxlan
|
DEV_NS=ip6vxlan00
|
DEV=ip6vxlan11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_ip6vxlan_tunnel
|
ip link set dev veth1 mtu 1500
|
attach_bpf $DEV ip6vxlan_set_tunnel ip6vxlan_get_tunnel
|
# underlay
|
ping6 $PING_ARG ::11
|
# ip4 over ip6
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: ip6$TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
|
}
|
|
test_geneve()
|
{
|
TYPE=geneve
|
DEV_NS=geneve00
|
DEV=geneve11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_geneve_tunnel
|
attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: $TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: $TYPE"${NC}
|
}
|
|
test_ip6geneve()
|
{
|
TYPE=geneve
|
DEV_NS=ip6geneve00
|
DEV=ip6geneve11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_ip6geneve_tunnel
|
attach_bpf $DEV ip6geneve_set_tunnel ip6geneve_get_tunnel
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: ip6$TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
|
}
|
|
test_ipip()
|
{
|
TYPE=ipip
|
DEV_NS=ipip00
|
DEV=ipip11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_ipip_tunnel
|
ip link set dev veth1 mtu 1500
|
attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: $TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: $TYPE"${NC}
|
}
|
|
test_ipip6()
|
{
|
TYPE=ip6tnl
|
DEV_NS=ipip6tnl00
|
DEV=ipip6tnl11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_ip6tnl_tunnel
|
ip link set dev veth1 mtu 1500
|
attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel
|
# underlay
|
ping6 $PING_ARG ::11
|
# ip4 over ip6
|
ping $PING_ARG 10.1.1.100
|
check_err $?
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: $TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: $TYPE"${NC}
|
}
|
|
test_ip6ip6()
|
{
|
TYPE=ip6tnl
|
DEV_NS=ip6ip6tnl00
|
DEV=ip6ip6tnl11
|
ret=0
|
|
check $TYPE
|
config_device
|
add_ip6tnl_tunnel
|
ip link set dev veth1 mtu 1500
|
attach_bpf $DEV ip6ip6_set_tunnel ip6ip6_get_tunnel
|
# underlay
|
ping6 $PING_ARG ::11
|
# ip6 over ip6
|
ping6 $PING_ARG 1::11
|
check_err $?
|
ip netns exec at_ns0 ping6 $PING_ARG 1::22
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: ip6$TYPE"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
|
}
|
|
setup_xfrm_tunnel()
|
{
|
auth=0x$(printf '1%.0s' {1..40})
|
enc=0x$(printf '2%.0s' {1..32})
|
spi_in_to_out=0x1
|
spi_out_to_in=0x2
|
# at_ns0 namespace
|
# at_ns0 -> root
|
ip netns exec at_ns0 \
|
ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
|
spi $spi_in_to_out reqid 1 mode tunnel \
|
auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
|
ip netns exec at_ns0 \
|
ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir out \
|
tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
|
mode tunnel
|
# root -> at_ns0
|
ip netns exec at_ns0 \
|
ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
|
spi $spi_out_to_in reqid 2 mode tunnel \
|
auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
|
ip netns exec at_ns0 \
|
ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir in \
|
tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
|
mode tunnel
|
# address & route
|
ip netns exec at_ns0 \
|
ip addr add dev veth0 10.1.1.100/32
|
ip netns exec at_ns0 \
|
ip route add 10.1.1.200 dev veth0 via 172.16.1.200 \
|
src 10.1.1.100
|
|
# root namespace
|
# at_ns0 -> root
|
ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
|
spi $spi_in_to_out reqid 1 mode tunnel \
|
auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
|
ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir in \
|
tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
|
mode tunnel
|
# root -> at_ns0
|
ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
|
spi $spi_out_to_in reqid 2 mode tunnel \
|
auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
|
ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir out \
|
tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
|
mode tunnel
|
# address & route
|
ip addr add dev veth1 10.1.1.200/32
|
ip route add 10.1.1.100 dev veth1 via 172.16.1.100 src 10.1.1.200
|
}
|
|
test_xfrm_tunnel()
|
{
|
config_device
|
> /sys/kernel/debug/tracing/trace
|
setup_xfrm_tunnel
|
tc qdisc add dev veth1 clsact
|
tc filter add dev veth1 proto ip ingress bpf da obj test_tunnel_kern.o \
|
sec xfrm_get_state
|
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
|
sleep 1
|
grep "reqid 1" /sys/kernel/debug/tracing/trace
|
check_err $?
|
grep "spi 0x1" /sys/kernel/debug/tracing/trace
|
check_err $?
|
grep "remote ip 0xac100164" /sys/kernel/debug/tracing/trace
|
check_err $?
|
cleanup
|
|
if [ $ret -ne 0 ]; then
|
echo -e ${RED}"FAIL: xfrm tunnel"${NC}
|
return 1
|
fi
|
echo -e ${GREEN}"PASS: xfrm tunnel"${NC}
|
}
|
|
attach_bpf()
|
{
|
DEV=$1
|
SET=$2
|
GET=$3
|
tc qdisc add dev $DEV clsact
|
tc filter add dev $DEV egress bpf da obj test_tunnel_kern.o sec $SET
|
tc filter add dev $DEV ingress bpf da obj test_tunnel_kern.o sec $GET
|
}
|
|
cleanup()
|
{
|
ip netns delete at_ns0 2> /dev/null
|
ip link del veth1 2> /dev/null
|
ip link del ipip11 2> /dev/null
|
ip link del ipip6tnl11 2> /dev/null
|
ip link del ip6ip6tnl11 2> /dev/null
|
ip link del gretap11 2> /dev/null
|
ip link del ip6gre11 2> /dev/null
|
ip link del ip6gretap11 2> /dev/null
|
ip link del vxlan11 2> /dev/null
|
ip link del ip6vxlan11 2> /dev/null
|
ip link del geneve11 2> /dev/null
|
ip link del ip6geneve11 2> /dev/null
|
ip link del erspan11 2> /dev/null
|
ip link del ip6erspan11 2> /dev/null
|
ip xfrm policy delete dir out src 10.1.1.200/32 dst 10.1.1.100/32 2> /dev/null
|
ip xfrm policy delete dir in src 10.1.1.100/32 dst 10.1.1.200/32 2> /dev/null
|
ip xfrm state delete src 172.16.1.100 dst 172.16.1.200 proto esp spi 0x1 2> /dev/null
|
ip xfrm state delete src 172.16.1.200 dst 172.16.1.100 proto esp spi 0x2 2> /dev/null
|
}
|
|
cleanup_exit()
|
{
|
echo "CATCH SIGKILL or SIGINT, cleanup and exit"
|
cleanup
|
exit 0
|
}
|
|
check()
|
{
|
ip link help 2>&1 | grep -q "\s$1\s"
|
if [ $? -ne 0 ];then
|
echo "SKIP $1: iproute2 not support"
|
cleanup
|
return 1
|
fi
|
}
|
|
enable_debug()
|
{
|
echo 'file ip_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
|
echo 'file ip6_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
|
echo 'file vxlan.c +p' > /sys/kernel/debug/dynamic_debug/control
|
echo 'file geneve.c +p' > /sys/kernel/debug/dynamic_debug/control
|
echo 'file ipip.c +p' > /sys/kernel/debug/dynamic_debug/control
|
}
|
|
check_err()
|
{
|
if [ $ret -eq 0 ]; then
|
ret=$1
|
fi
|
}
|
|
bpf_tunnel_test()
|
{
|
local errors=0
|
|
echo "Testing GRE tunnel..."
|
test_gre
|
errors=$(( $errors + $? ))
|
|
echo "Testing IP6GRE tunnel..."
|
test_ip6gre
|
errors=$(( $errors + $? ))
|
|
echo "Testing IP6GRETAP tunnel..."
|
test_ip6gretap
|
errors=$(( $errors + $? ))
|
|
echo "Testing ERSPAN tunnel..."
|
test_erspan v2
|
errors=$(( $errors + $? ))
|
|
echo "Testing IP6ERSPAN tunnel..."
|
test_ip6erspan v2
|
errors=$(( $errors + $? ))
|
|
echo "Testing VXLAN tunnel..."
|
test_vxlan
|
errors=$(( $errors + $? ))
|
|
echo "Testing IP6VXLAN tunnel..."
|
test_ip6vxlan
|
errors=$(( $errors + $? ))
|
|
echo "Testing GENEVE tunnel..."
|
test_geneve
|
errors=$(( $errors + $? ))
|
|
echo "Testing IP6GENEVE tunnel..."
|
test_ip6geneve
|
errors=$(( $errors + $? ))
|
|
echo "Testing IPIP tunnel..."
|
test_ipip
|
errors=$(( $errors + $? ))
|
|
echo "Testing IPIP6 tunnel..."
|
test_ipip6
|
errors=$(( $errors + $? ))
|
|
echo "Testing IP6IP6 tunnel..."
|
test_ip6ip6
|
errors=$(( $errors + $? ))
|
|
echo "Testing IPSec tunnel..."
|
test_xfrm_tunnel
|
errors=$(( $errors + $? ))
|
|
return $errors
|
}
|
|
trap cleanup 0 3 6
|
trap cleanup_exit 2 9
|
|
cleanup
|
bpf_tunnel_test
|
|
if [ $? -ne 0 ]; then
|
echo -e "$(basename $0): ${RED}FAIL${NC}"
|
exit 1
|
fi
|
echo -e "$(basename $0): ${GREEN}PASS${NC}"
|
exit 0
|
