// SPDX-License-Identifier: GPL-2.0-only
|
/****************************************************************************
|
* Driver for Solarflare network controllers and boards
|
* Copyright 2011-2013 Solarflare Communications Inc.
|
*/
|
|
#include <linux/bitops.h>
|
#include <linux/slab.h>
|
#include <linux/hwmon.h>
|
#include <linux/stat.h>
|
|
#include "net_driver.h"
|
#include "mcdi.h"
|
#include "mcdi_pcol.h"
|
#include "nic.h"
|
|
enum efx_hwmon_type {
|
EFX_HWMON_UNKNOWN,
|
EFX_HWMON_TEMP, /* temperature */
|
EFX_HWMON_COOL, /* cooling device, probably a heatsink */
|
EFX_HWMON_IN, /* voltage */
|
EFX_HWMON_CURR, /* current */
|
EFX_HWMON_POWER, /* power */
|
EFX_HWMON_TYPES_COUNT
|
};
|
|
static const char *const efx_hwmon_unit[EFX_HWMON_TYPES_COUNT] = {
|
[EFX_HWMON_TEMP] = " degC",
|
[EFX_HWMON_COOL] = " rpm", /* though nonsense for a heatsink */
|
[EFX_HWMON_IN] = " mV",
|
[EFX_HWMON_CURR] = " mA",
|
[EFX_HWMON_POWER] = " W",
|
};
|
|
static const struct {
|
const char *label;
|
enum efx_hwmon_type hwmon_type;
|
int port;
|
} efx_mcdi_sensor_type[] = {
|
#define SENSOR(name, label, hwmon_type, port) \
|
[MC_CMD_SENSOR_##name] = { label, EFX_HWMON_ ## hwmon_type, port }
|
SENSOR(CONTROLLER_TEMP, "Controller board temp.", TEMP, -1),
|
SENSOR(PHY_COMMON_TEMP, "PHY temp.", TEMP, -1),
|
SENSOR(CONTROLLER_COOLING, "Controller heat sink", COOL, -1),
|
SENSOR(PHY0_TEMP, "PHY temp.", TEMP, 0),
|
SENSOR(PHY0_COOLING, "PHY heat sink", COOL, 0),
|
SENSOR(PHY1_TEMP, "PHY temp.", TEMP, 1),
|
SENSOR(PHY1_COOLING, "PHY heat sink", COOL, 1),
|
SENSOR(IN_1V0, "1.0V supply", IN, -1),
|
SENSOR(IN_1V2, "1.2V supply", IN, -1),
|
SENSOR(IN_1V8, "1.8V supply", IN, -1),
|
SENSOR(IN_2V5, "2.5V supply", IN, -1),
|
SENSOR(IN_3V3, "3.3V supply", IN, -1),
|
SENSOR(IN_12V0, "12.0V supply", IN, -1),
|
SENSOR(IN_1V2A, "1.2V analogue supply", IN, -1),
|
SENSOR(IN_VREF, "Ref. voltage", IN, -1),
|
SENSOR(OUT_VAOE, "AOE FPGA supply", IN, -1),
|
SENSOR(AOE_TEMP, "AOE FPGA temp.", TEMP, -1),
|
SENSOR(PSU_AOE_TEMP, "AOE regulator temp.", TEMP, -1),
|
SENSOR(PSU_TEMP, "Controller regulator temp.",
|
TEMP, -1),
|
SENSOR(FAN_0, "Fan 0", COOL, -1),
|
SENSOR(FAN_1, "Fan 1", COOL, -1),
|
SENSOR(FAN_2, "Fan 2", COOL, -1),
|
SENSOR(FAN_3, "Fan 3", COOL, -1),
|
SENSOR(FAN_4, "Fan 4", COOL, -1),
|
SENSOR(IN_VAOE, "AOE input supply", IN, -1),
|
SENSOR(OUT_IAOE, "AOE output current", CURR, -1),
|
SENSOR(IN_IAOE, "AOE input current", CURR, -1),
|
SENSOR(NIC_POWER, "Board power use", POWER, -1),
|
SENSOR(IN_0V9, "0.9V supply", IN, -1),
|
SENSOR(IN_I0V9, "0.9V supply current", CURR, -1),
|
SENSOR(IN_I1V2, "1.2V supply current", CURR, -1),
|
SENSOR(IN_0V9_ADC, "0.9V supply (ext. ADC)", IN, -1),
|
SENSOR(CONTROLLER_2_TEMP, "Controller board temp. 2", TEMP, -1),
|
SENSOR(VREG_INTERNAL_TEMP, "Regulator die temp.", TEMP, -1),
|
SENSOR(VREG_0V9_TEMP, "0.9V regulator temp.", TEMP, -1),
|
SENSOR(VREG_1V2_TEMP, "1.2V regulator temp.", TEMP, -1),
|
SENSOR(CONTROLLER_VPTAT,
|
"Controller PTAT voltage (int. ADC)", IN, -1),
|
SENSOR(CONTROLLER_INTERNAL_TEMP,
|
"Controller die temp. (int. ADC)", TEMP, -1),
|
SENSOR(CONTROLLER_VPTAT_EXTADC,
|
"Controller PTAT voltage (ext. ADC)", IN, -1),
|
SENSOR(CONTROLLER_INTERNAL_TEMP_EXTADC,
|
"Controller die temp. (ext. ADC)", TEMP, -1),
|
SENSOR(AMBIENT_TEMP, "Ambient temp.", TEMP, -1),
|
SENSOR(AIRFLOW, "Air flow raw", IN, -1),
|
SENSOR(VDD08D_VSS08D_CSR, "0.9V die (int. ADC)", IN, -1),
|
SENSOR(VDD08D_VSS08D_CSR_EXTADC, "0.9V die (ext. ADC)", IN, -1),
|
SENSOR(HOTPOINT_TEMP, "Controller board temp. (hotpoint)", TEMP, -1),
|
#undef SENSOR
|
};
|
|
static const char *const sensor_status_names[] = {
|
[MC_CMD_SENSOR_STATE_OK] = "OK",
|
[MC_CMD_SENSOR_STATE_WARNING] = "Warning",
|
[MC_CMD_SENSOR_STATE_FATAL] = "Fatal",
|
[MC_CMD_SENSOR_STATE_BROKEN] = "Device failure",
|
[MC_CMD_SENSOR_STATE_NO_READING] = "No reading",
|
};
|
|
void efx_mcdi_sensor_event(struct efx_nic *efx, efx_qword_t *ev)
|
{
|
unsigned int type, state, value;
|
enum efx_hwmon_type hwmon_type = EFX_HWMON_UNKNOWN;
|
const char *name = NULL, *state_txt, *unit;
|
|
type = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_MONITOR);
|
state = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_STATE);
|
value = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_VALUE);
|
|
/* Deal gracefully with the board having more drivers than we
|
* know about, but do not expect new sensor states. */
|
if (type < ARRAY_SIZE(efx_mcdi_sensor_type)) {
|
name = efx_mcdi_sensor_type[type].label;
|
hwmon_type = efx_mcdi_sensor_type[type].hwmon_type;
|
}
|
if (!name)
|
name = "No sensor name available";
|
EFX_WARN_ON_PARANOID(state >= ARRAY_SIZE(sensor_status_names));
|
state_txt = sensor_status_names[state];
|
EFX_WARN_ON_PARANOID(hwmon_type >= EFX_HWMON_TYPES_COUNT);
|
unit = efx_hwmon_unit[hwmon_type];
|
if (!unit)
|
unit = "";
|
|
netif_err(efx, hw, efx->net_dev,
|
"Sensor %d (%s) reports condition '%s' for value %d%s\n",
|
type, name, state_txt, value, unit);
|
}
|
|
#ifdef CONFIG_SFC_MCDI_MON
|
|
struct efx_mcdi_mon_attribute {
|
struct device_attribute dev_attr;
|
unsigned int index;
|
unsigned int type;
|
enum efx_hwmon_type hwmon_type;
|
unsigned int limit_value;
|
char name[12];
|
};
|
|
static int efx_mcdi_mon_update(struct efx_nic *efx)
|
{
|
struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
|
MCDI_DECLARE_BUF(inbuf, MC_CMD_READ_SENSORS_EXT_IN_LEN);
|
int rc;
|
|
MCDI_SET_QWORD(inbuf, READ_SENSORS_EXT_IN_DMA_ADDR,
|
hwmon->dma_buf.dma_addr);
|
MCDI_SET_DWORD(inbuf, READ_SENSORS_EXT_IN_LENGTH, hwmon->dma_buf.len);
|
|
rc = efx_mcdi_rpc(efx, MC_CMD_READ_SENSORS,
|
inbuf, sizeof(inbuf), NULL, 0, NULL);
|
if (rc == 0)
|
hwmon->last_update = jiffies;
|
return rc;
|
}
|
|
static int efx_mcdi_mon_get_entry(struct device *dev, unsigned int index,
|
efx_dword_t *entry)
|
{
|
struct efx_nic *efx = dev_get_drvdata(dev->parent);
|
struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
|
int rc;
|
|
BUILD_BUG_ON(MC_CMD_READ_SENSORS_OUT_LEN != 0);
|
|
mutex_lock(&hwmon->update_lock);
|
|
/* Use cached value if last update was < 1 s ago */
|
if (time_before(jiffies, hwmon->last_update + HZ))
|
rc = 0;
|
else
|
rc = efx_mcdi_mon_update(efx);
|
|
/* Copy out the requested entry */
|
*entry = ((efx_dword_t *)hwmon->dma_buf.addr)[index];
|
|
mutex_unlock(&hwmon->update_lock);
|
|
return rc;
|
}
|
|
static ssize_t efx_mcdi_mon_show_value(struct device *dev,
|
struct device_attribute *attr,
|
char *buf)
|
{
|
struct efx_mcdi_mon_attribute *mon_attr =
|
container_of(attr, struct efx_mcdi_mon_attribute, dev_attr);
|
efx_dword_t entry;
|
unsigned int value, state;
|
int rc;
|
|
rc = efx_mcdi_mon_get_entry(dev, mon_attr->index, &entry);
|
if (rc)
|
return rc;
|
|
state = EFX_DWORD_FIELD(entry, MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_STATE);
|
if (state == MC_CMD_SENSOR_STATE_NO_READING)
|
return -EBUSY;
|
|
value = EFX_DWORD_FIELD(entry, MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_VALUE);
|
|
switch (mon_attr->hwmon_type) {
|
case EFX_HWMON_TEMP:
|
/* Convert temperature from degrees to milli-degrees Celsius */
|
value *= 1000;
|
break;
|
case EFX_HWMON_POWER:
|
/* Convert power from watts to microwatts */
|
value *= 1000000;
|
break;
|
default:
|
/* No conversion needed */
|
break;
|
}
|
|
return sprintf(buf, "%u\n", value);
|
}
|
|
static ssize_t efx_mcdi_mon_show_limit(struct device *dev,
|
struct device_attribute *attr,
|
char *buf)
|
{
|
struct efx_mcdi_mon_attribute *mon_attr =
|
container_of(attr, struct efx_mcdi_mon_attribute, dev_attr);
|
unsigned int value;
|
|
value = mon_attr->limit_value;
|
|
switch (mon_attr->hwmon_type) {
|
case EFX_HWMON_TEMP:
|
/* Convert temperature from degrees to milli-degrees Celsius */
|
value *= 1000;
|
break;
|
case EFX_HWMON_POWER:
|
/* Convert power from watts to microwatts */
|
value *= 1000000;
|
break;
|
default:
|
/* No conversion needed */
|
break;
|
}
|
|
return sprintf(buf, "%u\n", value);
|
}
|
|
static ssize_t efx_mcdi_mon_show_alarm(struct device *dev,
|
struct device_attribute *attr,
|
char *buf)
|
{
|
struct efx_mcdi_mon_attribute *mon_attr =
|
container_of(attr, struct efx_mcdi_mon_attribute, dev_attr);
|
efx_dword_t entry;
|
int state;
|
int rc;
|
|
rc = efx_mcdi_mon_get_entry(dev, mon_attr->index, &entry);
|
if (rc)
|
return rc;
|
|
state = EFX_DWORD_FIELD(entry, MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_STATE);
|
return sprintf(buf, "%d\n", state != MC_CMD_SENSOR_STATE_OK);
|
}
|
|
static ssize_t efx_mcdi_mon_show_label(struct device *dev,
|
struct device_attribute *attr,
|
char *buf)
|
{
|
struct efx_mcdi_mon_attribute *mon_attr =
|
container_of(attr, struct efx_mcdi_mon_attribute, dev_attr);
|
return sprintf(buf, "%s\n",
|
efx_mcdi_sensor_type[mon_attr->type].label);
|
}
|
|
static void
|
efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name,
|
ssize_t (*reader)(struct device *,
|
struct device_attribute *, char *),
|
unsigned int index, unsigned int type,
|
unsigned int limit_value)
|
{
|
struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
|
struct efx_mcdi_mon_attribute *attr = &hwmon->attrs[hwmon->n_attrs];
|
|
strlcpy(attr->name, name, sizeof(attr->name));
|
attr->index = index;
|
attr->type = type;
|
if (type < ARRAY_SIZE(efx_mcdi_sensor_type))
|
attr->hwmon_type = efx_mcdi_sensor_type[type].hwmon_type;
|
else
|
attr->hwmon_type = EFX_HWMON_UNKNOWN;
|
attr->limit_value = limit_value;
|
sysfs_attr_init(&attr->dev_attr.attr);
|
attr->dev_attr.attr.name = attr->name;
|
attr->dev_attr.attr.mode = 0444;
|
attr->dev_attr.show = reader;
|
hwmon->group.attrs[hwmon->n_attrs++] = &attr->dev_attr.attr;
|
}
|
|
int efx_mcdi_mon_probe(struct efx_nic *efx)
|
{
|
unsigned int n_temp = 0, n_cool = 0, n_in = 0, n_curr = 0, n_power = 0;
|
struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
|
MCDI_DECLARE_BUF(inbuf, MC_CMD_SENSOR_INFO_EXT_IN_LEN);
|
MCDI_DECLARE_BUF(outbuf, MC_CMD_SENSOR_INFO_OUT_LENMAX);
|
unsigned int n_pages, n_sensors, n_attrs, page;
|
size_t outlen;
|
char name[12];
|
u32 mask;
|
int rc, i, j, type;
|
|
/* Find out how many sensors are present */
|
n_sensors = 0;
|
page = 0;
|
do {
|
MCDI_SET_DWORD(inbuf, SENSOR_INFO_EXT_IN_PAGE, page);
|
|
rc = efx_mcdi_rpc(efx, MC_CMD_SENSOR_INFO, inbuf, sizeof(inbuf),
|
outbuf, sizeof(outbuf), &outlen);
|
if (rc)
|
return rc;
|
if (outlen < MC_CMD_SENSOR_INFO_OUT_LENMIN)
|
return -EIO;
|
|
mask = MCDI_DWORD(outbuf, SENSOR_INFO_OUT_MASK);
|
n_sensors += hweight32(mask & ~(1 << MC_CMD_SENSOR_PAGE0_NEXT));
|
++page;
|
} while (mask & (1 << MC_CMD_SENSOR_PAGE0_NEXT));
|
n_pages = page;
|
|
/* Don't create a device if there are none */
|
if (n_sensors == 0)
|
return 0;
|
|
rc = efx_nic_alloc_buffer(
|
efx, &hwmon->dma_buf,
|
n_sensors * MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_LEN,
|
GFP_KERNEL);
|
if (rc)
|
return rc;
|
|
mutex_init(&hwmon->update_lock);
|
efx_mcdi_mon_update(efx);
|
|
/* Allocate space for the maximum possible number of
|
* attributes for this set of sensors:
|
* value, min, max, crit, alarm and label for each sensor.
|
*/
|
n_attrs = 6 * n_sensors;
|
hwmon->attrs = kcalloc(n_attrs, sizeof(*hwmon->attrs), GFP_KERNEL);
|
if (!hwmon->attrs) {
|
rc = -ENOMEM;
|
goto fail;
|
}
|
hwmon->group.attrs = kcalloc(n_attrs + 1, sizeof(struct attribute *),
|
GFP_KERNEL);
|
if (!hwmon->group.attrs) {
|
rc = -ENOMEM;
|
goto fail;
|
}
|
|
for (i = 0, j = -1, type = -1; ; i++) {
|
enum efx_hwmon_type hwmon_type;
|
const char *hwmon_prefix;
|
unsigned hwmon_index;
|
u16 min1, max1, min2, max2;
|
|
/* Find next sensor type or exit if there is none */
|
do {
|
type++;
|
|
if ((type % 32) == 0) {
|
page = type / 32;
|
j = -1;
|
if (page == n_pages)
|
goto hwmon_register;
|
|
MCDI_SET_DWORD(inbuf, SENSOR_INFO_EXT_IN_PAGE,
|
page);
|
rc = efx_mcdi_rpc(efx, MC_CMD_SENSOR_INFO,
|
inbuf, sizeof(inbuf),
|
outbuf, sizeof(outbuf),
|
&outlen);
|
if (rc)
|
goto fail;
|
if (outlen < MC_CMD_SENSOR_INFO_OUT_LENMIN) {
|
rc = -EIO;
|
goto fail;
|
}
|
|
mask = (MCDI_DWORD(outbuf,
|
SENSOR_INFO_OUT_MASK) &
|
~(1 << MC_CMD_SENSOR_PAGE0_NEXT));
|
|
/* Check again for short response */
|
if (outlen <
|
MC_CMD_SENSOR_INFO_OUT_LEN(hweight32(mask))) {
|
rc = -EIO;
|
goto fail;
|
}
|
}
|
} while (!(mask & (1 << type % 32)));
|
j++;
|
|
if (type < ARRAY_SIZE(efx_mcdi_sensor_type)) {
|
hwmon_type = efx_mcdi_sensor_type[type].hwmon_type;
|
|
/* Skip sensors specific to a different port */
|
if (hwmon_type != EFX_HWMON_UNKNOWN &&
|
efx_mcdi_sensor_type[type].port >= 0 &&
|
efx_mcdi_sensor_type[type].port !=
|
efx_port_num(efx))
|
continue;
|
} else {
|
hwmon_type = EFX_HWMON_UNKNOWN;
|
}
|
|
switch (hwmon_type) {
|
case EFX_HWMON_TEMP:
|
hwmon_prefix = "temp";
|
hwmon_index = ++n_temp; /* 1-based */
|
break;
|
case EFX_HWMON_COOL:
|
/* This is likely to be a heatsink, but there
|
* is no convention for representing cooling
|
* devices other than fans.
|
*/
|
hwmon_prefix = "fan";
|
hwmon_index = ++n_cool; /* 1-based */
|
break;
|
default:
|
hwmon_prefix = "in";
|
hwmon_index = n_in++; /* 0-based */
|
break;
|
case EFX_HWMON_CURR:
|
hwmon_prefix = "curr";
|
hwmon_index = ++n_curr; /* 1-based */
|
break;
|
case EFX_HWMON_POWER:
|
hwmon_prefix = "power";
|
hwmon_index = ++n_power; /* 1-based */
|
break;
|
}
|
|
min1 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY,
|
SENSOR_INFO_ENTRY, j, MIN1);
|
max1 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY,
|
SENSOR_INFO_ENTRY, j, MAX1);
|
min2 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY,
|
SENSOR_INFO_ENTRY, j, MIN2);
|
max2 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY,
|
SENSOR_INFO_ENTRY, j, MAX2);
|
|
if (min1 != max1) {
|
snprintf(name, sizeof(name), "%s%u_input",
|
hwmon_prefix, hwmon_index);
|
efx_mcdi_mon_add_attr(
|
efx, name, efx_mcdi_mon_show_value, i, type, 0);
|
|
if (hwmon_type != EFX_HWMON_POWER) {
|
snprintf(name, sizeof(name), "%s%u_min",
|
hwmon_prefix, hwmon_index);
|
efx_mcdi_mon_add_attr(
|
efx, name, efx_mcdi_mon_show_limit,
|
i, type, min1);
|
}
|
|
snprintf(name, sizeof(name), "%s%u_max",
|
hwmon_prefix, hwmon_index);
|
efx_mcdi_mon_add_attr(
|
efx, name, efx_mcdi_mon_show_limit,
|
i, type, max1);
|
|
if (min2 != max2) {
|
/* Assume max2 is critical value.
|
* But we have no good way to expose min2.
|
*/
|
snprintf(name, sizeof(name), "%s%u_crit",
|
hwmon_prefix, hwmon_index);
|
efx_mcdi_mon_add_attr(
|
efx, name, efx_mcdi_mon_show_limit,
|
i, type, max2);
|
}
|
}
|
|
snprintf(name, sizeof(name), "%s%u_alarm",
|
hwmon_prefix, hwmon_index);
|
efx_mcdi_mon_add_attr(
|
efx, name, efx_mcdi_mon_show_alarm, i, type, 0);
|
|
if (type < ARRAY_SIZE(efx_mcdi_sensor_type) &&
|
efx_mcdi_sensor_type[type].label) {
|
snprintf(name, sizeof(name), "%s%u_label",
|
hwmon_prefix, hwmon_index);
|
efx_mcdi_mon_add_attr(
|
efx, name, efx_mcdi_mon_show_label, i, type, 0);
|
}
|
}
|
|
hwmon_register:
|
hwmon->groups[0] = &hwmon->group;
|
hwmon->device = hwmon_device_register_with_groups(&efx->pci_dev->dev,
|
KBUILD_MODNAME, NULL,
|
hwmon->groups);
|
if (IS_ERR(hwmon->device)) {
|
rc = PTR_ERR(hwmon->device);
|
goto fail;
|
}
|
|
return 0;
|
|
fail:
|
efx_mcdi_mon_remove(efx);
|
return rc;
|
}
|
|
void efx_mcdi_mon_remove(struct efx_nic *efx)
|
{
|
struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
|
|
if (hwmon->device)
|
hwmon_device_unregister(hwmon->device);
|
kfree(hwmon->attrs);
|
kfree(hwmon->group.attrs);
|
efx_nic_free_buffer(efx, &hwmon->dma_buf);
|
}
|
|
#endif /* CONFIG_SFC_MCDI_MON */
|
