/*
|
* Linux driver for Technisat DVB-S/S2 USB 2.0 device
|
*
|
* Copyright (C) 2010 Patrick Boettcher,
|
* Kernel Labs Inc. PO Box 745, St James, NY 11780
|
*
|
* Development was sponsored by Technisat Digital UK Limited, whose
|
* registered office is Witan Gate House 500 - 600 Witan Gate West,
|
* Milton Keynes, MK9 1SH
|
*
|
* This program is free software; you can redistribute it and/or
|
* modify it under the terms of the GNU General Public License as
|
* published by the Free Software Foundation; either version 2 of the
|
* License, or (at your option) any later version.
|
*
|
*
|
* THIS PROGRAM IS PROVIDED "AS IS" AND BOTH THE COPYRIGHT HOLDER AND
|
* TECHNISAT DIGITAL UK LTD DISCLAIM ALL WARRANTIES WITH REGARD TO
|
* THIS PROGRAM INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
|
* FITNESS FOR A PARTICULAR PURPOSE. NEITHER THE COPYRIGHT HOLDER
|
* NOR TECHNISAT DIGITAL UK LIMITED SHALL BE LIABLE FOR ANY SPECIAL,
|
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
|
* RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
|
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
|
* IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS PROGRAM. See the
|
* GNU General Public License for more details.
|
*/
|
|
#define DVB_USB_LOG_PREFIX "technisat-usb2"
|
#include "dvb-usb.h"
|
|
#include "stv6110x.h"
|
#include "stv090x.h"
|
|
/* module parameters */
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
static int debug;
|
module_param(debug, int, 0644);
|
MODULE_PARM_DESC(debug,
|
"set debugging level (bit-mask: 1=info,2=eeprom,4=i2c,8=rc)." \
|
DVB_USB_DEBUG_STATUS);
|
|
/* disables all LED control command and
|
* also does not start the signal polling thread */
|
static int disable_led_control;
|
module_param(disable_led_control, int, 0444);
|
MODULE_PARM_DESC(disable_led_control,
|
"disable LED control of the device (default: 0 - LED control is active).");
|
|
/* device private data */
|
struct technisat_usb2_state {
|
struct dvb_usb_device *dev;
|
struct delayed_work green_led_work;
|
u8 power_state;
|
|
u16 last_scan_code;
|
|
u8 buf[64];
|
};
|
|
/* debug print helpers */
|
#define deb_info(args...) dprintk(debug, 0x01, args)
|
#define deb_eeprom(args...) dprintk(debug, 0x02, args)
|
#define deb_i2c(args...) dprintk(debug, 0x04, args)
|
#define deb_rc(args...) dprintk(debug, 0x08, args)
|
|
/* vendor requests */
|
#define SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST 0xB3
|
#define SET_FRONT_END_RESET_VENDOR_REQUEST 0xB4
|
#define GET_VERSION_INFO_VENDOR_REQUEST 0xB5
|
#define SET_GREEN_LED_VENDOR_REQUEST 0xB6
|
#define SET_RED_LED_VENDOR_REQUEST 0xB7
|
#define GET_IR_DATA_VENDOR_REQUEST 0xB8
|
#define SET_LED_TIMER_DIVIDER_VENDOR_REQUEST 0xB9
|
#define SET_USB_REENUMERATION 0xBA
|
|
/* i2c-access methods */
|
#define I2C_SPEED_100KHZ_BIT 0x40
|
|
#define I2C_STATUS_NAK 7
|
#define I2C_STATUS_OK 8
|
|
static int technisat_usb2_i2c_access(struct usb_device *udev,
|
u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
|
{
|
u8 *b;
|
int ret, actual_length;
|
|
b = kmalloc(64, GFP_KERNEL);
|
if (!b)
|
return -ENOMEM;
|
|
deb_i2c("i2c-access: %02x, tx: ", device_addr);
|
debug_dump(tx, txlen, deb_i2c);
|
deb_i2c(" ");
|
|
if (txlen > 62) {
|
err("i2c TX buffer can't exceed 62 bytes (dev 0x%02x)",
|
device_addr);
|
txlen = 62;
|
}
|
if (rxlen > 62) {
|
err("i2c RX buffer can't exceed 62 bytes (dev 0x%02x)",
|
device_addr);
|
rxlen = 62;
|
}
|
|
b[0] = I2C_SPEED_100KHZ_BIT;
|
b[1] = device_addr << 1;
|
|
if (rx != NULL) {
|
b[0] |= rxlen;
|
b[1] |= 1;
|
}
|
|
memcpy(&b[2], tx, txlen);
|
ret = usb_bulk_msg(udev,
|
usb_sndbulkpipe(udev, 0x01),
|
b, 2 + txlen,
|
NULL, 1000);
|
|
if (ret < 0) {
|
err("i2c-error: out failed %02x = %d", device_addr, ret);
|
goto err;
|
}
|
|
ret = usb_bulk_msg(udev,
|
usb_rcvbulkpipe(udev, 0x01),
|
b, 64, &actual_length, 1000);
|
if (ret < 0) {
|
err("i2c-error: in failed %02x = %d", device_addr, ret);
|
goto err;
|
}
|
|
if (b[0] != I2C_STATUS_OK) {
|
err("i2c-error: %02x = %d", device_addr, b[0]);
|
/* handle tuner-i2c-nak */
|
if (!(b[0] == I2C_STATUS_NAK &&
|
device_addr == 0x60
|
/* && device_is_technisat_usb2 */))
|
goto err;
|
}
|
|
deb_i2c("status: %d, ", b[0]);
|
|
if (rx != NULL) {
|
memcpy(rx, &b[2], rxlen);
|
|
deb_i2c("rx (%d): ", rxlen);
|
debug_dump(rx, rxlen, deb_i2c);
|
}
|
|
deb_i2c("\n");
|
|
err:
|
kfree(b);
|
return ret;
|
}
|
|
static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
|
int num)
|
{
|
int ret = 0, i;
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
/* Ensure nobody else hits the i2c bus while we're sending our
|
sequence of messages, (such as the remote control thread) */
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
return -EAGAIN;
|
|
for (i = 0; i < num; i++) {
|
if (i+1 < num && msg[i+1].flags & I2C_M_RD) {
|
ret = technisat_usb2_i2c_access(d->udev, msg[i+1].addr,
|
msg[i].buf, msg[i].len,
|
msg[i+1].buf, msg[i+1].len);
|
if (ret != 0)
|
break;
|
i++;
|
} else {
|
ret = technisat_usb2_i2c_access(d->udev, msg[i].addr,
|
msg[i].buf, msg[i].len,
|
NULL, 0);
|
if (ret != 0)
|
break;
|
}
|
}
|
|
if (ret == 0)
|
ret = i;
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return ret;
|
}
|
|
static u32 technisat_usb2_i2c_func(struct i2c_adapter *adapter)
|
{
|
return I2C_FUNC_I2C;
|
}
|
|
static struct i2c_algorithm technisat_usb2_i2c_algo = {
|
.master_xfer = technisat_usb2_i2c_xfer,
|
.functionality = technisat_usb2_i2c_func,
|
};
|
|
#if 0
|
static void technisat_usb2_frontend_reset(struct usb_device *udev)
|
{
|
usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
SET_FRONT_END_RESET_VENDOR_REQUEST,
|
USB_TYPE_VENDOR | USB_DIR_OUT,
|
10, 0,
|
NULL, 0, 500);
|
}
|
#endif
|
|
/* LED control */
|
enum technisat_usb2_led_state {
|
TECH_LED_OFF,
|
TECH_LED_BLINK,
|
TECH_LED_ON,
|
TECH_LED_UNDEFINED
|
};
|
|
static int technisat_usb2_set_led(struct dvb_usb_device *d, int red,
|
enum technisat_usb2_led_state st)
|
{
|
struct technisat_usb2_state *state = d->priv;
|
u8 *led = state->buf;
|
int ret;
|
|
led[0] = red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST;
|
|
if (disable_led_control && st != TECH_LED_OFF)
|
return 0;
|
|
switch (st) {
|
case TECH_LED_ON:
|
led[1] = 0x82;
|
break;
|
case TECH_LED_BLINK:
|
led[1] = 0x82;
|
if (red) {
|
led[2] = 0x02;
|
led[3] = 10;
|
led[4] = 10;
|
} else {
|
led[2] = 0xff;
|
led[3] = 50;
|
led[4] = 50;
|
}
|
led[5] = 1;
|
break;
|
|
default:
|
case TECH_LED_OFF:
|
led[1] = 0x80;
|
break;
|
}
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
return -EAGAIN;
|
|
ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
|
red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST,
|
USB_TYPE_VENDOR | USB_DIR_OUT,
|
0, 0,
|
led, 8, 500);
|
|
mutex_unlock(&d->i2c_mutex);
|
return ret;
|
}
|
|
static int technisat_usb2_set_led_timer(struct dvb_usb_device *d, u8 red, u8 green)
|
{
|
struct technisat_usb2_state *state = d->priv;
|
u8 *b = state->buf;
|
int ret;
|
|
b[0] = 0;
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
return -EAGAIN;
|
|
ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
|
SET_LED_TIMER_DIVIDER_VENDOR_REQUEST,
|
USB_TYPE_VENDOR | USB_DIR_OUT,
|
(red << 8) | green, 0,
|
b, 1, 500);
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return ret;
|
}
|
|
static void technisat_usb2_green_led_control(struct work_struct *work)
|
{
|
struct technisat_usb2_state *state =
|
container_of(work, struct technisat_usb2_state, green_led_work.work);
|
struct dvb_frontend *fe = state->dev->adapter[0].fe_adap[0].fe;
|
|
if (state->power_state == 0)
|
goto schedule;
|
|
if (fe != NULL) {
|
enum fe_status status;
|
|
if (fe->ops.read_status(fe, &status) != 0)
|
goto schedule;
|
|
if (status & FE_HAS_LOCK) {
|
u32 ber;
|
|
if (fe->ops.read_ber(fe, &ber) != 0)
|
goto schedule;
|
|
if (ber > 1000)
|
technisat_usb2_set_led(state->dev, 0, TECH_LED_BLINK);
|
else
|
technisat_usb2_set_led(state->dev, 0, TECH_LED_ON);
|
} else
|
technisat_usb2_set_led(state->dev, 0, TECH_LED_OFF);
|
}
|
|
schedule:
|
schedule_delayed_work(&state->green_led_work,
|
msecs_to_jiffies(500));
|
}
|
|
/* method to find out whether the firmware has to be downloaded or not */
|
static int technisat_usb2_identify_state(struct usb_device *udev,
|
const struct dvb_usb_device_properties *props,
|
const struct dvb_usb_device_description **desc, int *cold)
|
{
|
int ret;
|
u8 *version;
|
|
version = kmalloc(3, GFP_KERNEL);
|
if (!version)
|
return -ENOMEM;
|
|
/* first select the interface */
|
if (usb_set_interface(udev, 0, 1) != 0)
|
err("could not set alternate setting to 0");
|
else
|
info("set alternate setting");
|
|
*cold = 0; /* by default do not download a firmware - just in case something is wrong */
|
|
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
GET_VERSION_INFO_VENDOR_REQUEST,
|
USB_TYPE_VENDOR | USB_DIR_IN,
|
0, 0,
|
version, 3, 500);
|
|
if (ret < 0)
|
*cold = 1;
|
else {
|
info("firmware version: %d.%d", version[1], version[2]);
|
*cold = 0;
|
}
|
|
kfree(version);
|
|
return 0;
|
}
|
|
/* power control */
|
static int technisat_usb2_power_ctrl(struct dvb_usb_device *d, int level)
|
{
|
struct technisat_usb2_state *state = d->priv;
|
|
state->power_state = level;
|
|
if (disable_led_control)
|
return 0;
|
|
/* green led is turned off in any case - will be turned on when tuning */
|
technisat_usb2_set_led(d, 0, TECH_LED_OFF);
|
/* red led is turned on all the time */
|
technisat_usb2_set_led(d, 1, TECH_LED_ON);
|
return 0;
|
}
|
|
/* mac address reading - from the eeprom */
|
#if 0
|
static void technisat_usb2_eeprom_dump(struct dvb_usb_device *d)
|
{
|
u8 reg;
|
u8 b[16];
|
int i, j;
|
|
/* full EEPROM dump */
|
for (j = 0; j < 256 * 4; j += 16) {
|
reg = j;
|
if (technisat_usb2_i2c_access(d->udev, 0x50 + j / 256, ®, 1, b, 16) != 0)
|
break;
|
|
deb_eeprom("EEPROM: %01x%02x: ", j / 256, reg);
|
for (i = 0; i < 16; i++)
|
deb_eeprom("%02x ", b[i]);
|
deb_eeprom("\n");
|
}
|
}
|
#endif
|
|
static u8 technisat_usb2_calc_lrc(const u8 *b, u16 length)
|
{
|
u8 lrc = 0;
|
while (--length)
|
lrc ^= *b++;
|
return lrc;
|
}
|
|
static int technisat_usb2_eeprom_lrc_read(struct dvb_usb_device *d,
|
u16 offset, u8 *b, u16 length, u8 tries)
|
{
|
u8 bo = offset & 0xff;
|
struct i2c_msg msg[] = {
|
{
|
.addr = 0x50 | ((offset >> 8) & 0x3),
|
.buf = &bo,
|
.len = 1
|
}, {
|
.addr = 0x50 | ((offset >> 8) & 0x3),
|
.flags = I2C_M_RD,
|
.buf = b,
|
.len = length
|
}
|
};
|
|
while (tries--) {
|
int status;
|
|
if (i2c_transfer(&d->i2c_adap, msg, 2) != 2)
|
break;
|
|
status =
|
technisat_usb2_calc_lrc(b, length - 1) == b[length - 1];
|
|
if (status)
|
return 0;
|
}
|
|
return -EREMOTEIO;
|
}
|
|
#define EEPROM_MAC_START 0x3f8
|
#define EEPROM_MAC_TOTAL 8
|
static int technisat_usb2_read_mac_address(struct dvb_usb_device *d,
|
u8 mac[])
|
{
|
u8 buf[EEPROM_MAC_TOTAL];
|
|
if (technisat_usb2_eeprom_lrc_read(d, EEPROM_MAC_START,
|
buf, EEPROM_MAC_TOTAL, 4) != 0)
|
return -ENODEV;
|
|
memcpy(mac, buf, 6);
|
return 0;
|
}
|
|
static struct stv090x_config technisat_usb2_stv090x_config;
|
|
/* frontend attach */
|
static int technisat_usb2_set_voltage(struct dvb_frontend *fe,
|
enum fe_sec_voltage voltage)
|
{
|
int i;
|
u8 gpio[3] = { 0 }; /* 0 = 2, 1 = 3, 2 = 4 */
|
|
gpio[2] = 1; /* high - voltage ? */
|
|
switch (voltage) {
|
case SEC_VOLTAGE_13:
|
gpio[0] = 1;
|
break;
|
case SEC_VOLTAGE_18:
|
gpio[0] = 1;
|
gpio[1] = 1;
|
break;
|
default:
|
case SEC_VOLTAGE_OFF:
|
break;
|
}
|
|
for (i = 0; i < 3; i++)
|
if (technisat_usb2_stv090x_config.set_gpio(fe, i+2, 0,
|
gpio[i], 0) != 0)
|
return -EREMOTEIO;
|
return 0;
|
}
|
|
static struct stv090x_config technisat_usb2_stv090x_config = {
|
.device = STV0903,
|
.demod_mode = STV090x_SINGLE,
|
.clk_mode = STV090x_CLK_EXT,
|
|
.xtal = 8000000,
|
.address = 0x68,
|
|
.ts1_mode = STV090x_TSMODE_DVBCI,
|
.ts1_clk = 13400000,
|
.ts1_tei = 1,
|
|
.repeater_level = STV090x_RPTLEVEL_64,
|
|
.tuner_bbgain = 6,
|
};
|
|
static struct stv6110x_config technisat_usb2_stv6110x_config = {
|
.addr = 0x60,
|
.refclk = 16000000,
|
.clk_div = 2,
|
};
|
|
static int technisat_usb2_frontend_attach(struct dvb_usb_adapter *a)
|
{
|
struct usb_device *udev = a->dev->udev;
|
int ret;
|
|
a->fe_adap[0].fe = dvb_attach(stv090x_attach, &technisat_usb2_stv090x_config,
|
&a->dev->i2c_adap, STV090x_DEMODULATOR_0);
|
|
if (a->fe_adap[0].fe) {
|
const struct stv6110x_devctl *ctl;
|
|
ctl = dvb_attach(stv6110x_attach,
|
a->fe_adap[0].fe,
|
&technisat_usb2_stv6110x_config,
|
&a->dev->i2c_adap);
|
|
if (ctl) {
|
technisat_usb2_stv090x_config.tuner_init = ctl->tuner_init;
|
technisat_usb2_stv090x_config.tuner_sleep = ctl->tuner_sleep;
|
technisat_usb2_stv090x_config.tuner_set_mode = ctl->tuner_set_mode;
|
technisat_usb2_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
|
technisat_usb2_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
|
technisat_usb2_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
|
technisat_usb2_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
|
technisat_usb2_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain;
|
technisat_usb2_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain;
|
technisat_usb2_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk;
|
technisat_usb2_stv090x_config.tuner_get_status = ctl->tuner_get_status;
|
|
/* call the init function once to initialize
|
tuner's clock output divider and demod's
|
master clock */
|
if (a->fe_adap[0].fe->ops.init)
|
a->fe_adap[0].fe->ops.init(a->fe_adap[0].fe);
|
|
if (mutex_lock_interruptible(&a->dev->i2c_mutex) < 0)
|
return -EAGAIN;
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST,
|
USB_TYPE_VENDOR | USB_DIR_OUT,
|
0, 0,
|
NULL, 0, 500);
|
mutex_unlock(&a->dev->i2c_mutex);
|
|
if (ret != 0)
|
err("could not set IF_CLK to external");
|
|
a->fe_adap[0].fe->ops.set_voltage = technisat_usb2_set_voltage;
|
|
/* if everything was successful assign a nice name to the frontend */
|
strscpy(a->fe_adap[0].fe->ops.info.name,
|
a->dev->desc->name,
|
sizeof(a->fe_adap[0].fe->ops.info.name));
|
} else {
|
dvb_frontend_detach(a->fe_adap[0].fe);
|
a->fe_adap[0].fe = NULL;
|
}
|
}
|
|
technisat_usb2_set_led_timer(a->dev, 1, 1);
|
|
return a->fe_adap[0].fe == NULL ? -ENODEV : 0;
|
}
|
|
/* Remote control */
|
|
/* the device is giving providing raw IR-signals to the host mapping
|
* it only to one remote control is just the default implementation
|
*/
|
#define NOMINAL_IR_BIT_TRANSITION_TIME_US 889
|
#define NOMINAL_IR_BIT_TIME_US (2 * NOMINAL_IR_BIT_TRANSITION_TIME_US)
|
|
#define FIRMWARE_CLOCK_TICK 83333
|
#define FIRMWARE_CLOCK_DIVISOR 256
|
|
#define IR_PERCENT_TOLERANCE 15
|
|
#define NOMINAL_IR_BIT_TRANSITION_TICKS ((NOMINAL_IR_BIT_TRANSITION_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK)
|
#define NOMINAL_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICKS / FIRMWARE_CLOCK_DIVISOR)
|
|
#define NOMINAL_IR_BIT_TIME_TICKS ((NOMINAL_IR_BIT_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK)
|
#define NOMINAL_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICKS / FIRMWARE_CLOCK_DIVISOR)
|
|
#define MINIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT - ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
|
#define MAXIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT + ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
|
|
#define MINIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT - ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
|
#define MAXIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT + ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
|
|
static int technisat_usb2_get_ir(struct dvb_usb_device *d)
|
{
|
struct technisat_usb2_state *state = d->priv;
|
struct ir_raw_event ev;
|
u8 *buf = state->buf;
|
int i, ret;
|
|
buf[0] = GET_IR_DATA_VENDOR_REQUEST;
|
buf[1] = 0x08;
|
buf[2] = 0x8f;
|
buf[3] = MINIMUM_IR_BIT_TRANSITION_TICK_COUNT;
|
buf[4] = MAXIMUM_IR_BIT_TIME_TICK_COUNT;
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
return -EAGAIN;
|
ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
|
GET_IR_DATA_VENDOR_REQUEST,
|
USB_TYPE_VENDOR | USB_DIR_OUT,
|
0, 0,
|
buf, 5, 500);
|
if (ret < 0)
|
goto unlock;
|
|
buf[1] = 0;
|
buf[2] = 0;
|
ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
|
GET_IR_DATA_VENDOR_REQUEST,
|
USB_TYPE_VENDOR | USB_DIR_IN,
|
0x8080, 0,
|
buf, 62, 500);
|
|
unlock:
|
mutex_unlock(&d->i2c_mutex);
|
|
if (ret < 0)
|
return ret;
|
|
if (ret == 1)
|
return 0; /* no key pressed */
|
|
/* decoding */
|
|
#if 0
|
deb_rc("RC: %d ", ret);
|
debug_dump(buf + 1, ret, deb_rc);
|
#endif
|
|
ev.pulse = 0;
|
for (i = 1; i < ARRAY_SIZE(state->buf); i++) {
|
if (buf[i] == 0xff) {
|
ev.pulse = 0;
|
ev.duration = 889 * 2;
|
ir_raw_event_store(d->rc_dev, &ev);
|
break;
|
}
|
|
ev.pulse = !ev.pulse;
|
ev.duration = (buf[i] * FIRMWARE_CLOCK_DIVISOR *
|
FIRMWARE_CLOCK_TICK) / (1000 * 1000);
|
ir_raw_event_store(d->rc_dev, &ev);
|
}
|
|
ir_raw_event_handle(d->rc_dev);
|
|
return 1;
|
}
|
|
static int technisat_usb2_rc_query(struct dvb_usb_device *d)
|
{
|
int ret = technisat_usb2_get_ir(d);
|
|
if (ret < 0)
|
return ret;
|
|
if (ret == 0)
|
return 0;
|
|
if (!disable_led_control)
|
technisat_usb2_set_led(d, 1, TECH_LED_BLINK);
|
|
return 0;
|
}
|
|
/* DVB-USB and USB stuff follows */
|
static struct usb_device_id technisat_usb2_id_table[] = {
|
{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_DVB_S2) },
|
{ 0 } /* Terminating entry */
|
};
|
MODULE_DEVICE_TABLE(usb, technisat_usb2_id_table);
|
|
/* device description */
|
static struct dvb_usb_device_properties technisat_usb2_devices = {
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
.identify_state = technisat_usb2_identify_state,
|
.firmware = "dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw",
|
|
.size_of_priv = sizeof(struct technisat_usb2_state),
|
|
.i2c_algo = &technisat_usb2_i2c_algo,
|
|
.power_ctrl = technisat_usb2_power_ctrl,
|
.read_mac_address = technisat_usb2_read_mac_address,
|
|
.num_adapters = 1,
|
.adapter = {
|
{
|
.num_frontends = 1,
|
.fe = {{
|
.frontend_attach = technisat_usb2_frontend_attach,
|
|
.stream = {
|
.type = USB_ISOC,
|
.count = 4,
|
.endpoint = 0x2,
|
.u = {
|
.isoc = {
|
.framesperurb = 32,
|
.framesize = 2048,
|
.interval = 1,
|
}
|
}
|
},
|
}},
|
.size_of_priv = 0,
|
},
|
},
|
|
.num_device_descs = 1,
|
.devices = {
|
{ "Technisat SkyStar USB HD (DVB-S/S2)",
|
{ &technisat_usb2_id_table[0], NULL },
|
{ NULL },
|
},
|
},
|
|
.rc.core = {
|
.rc_interval = 100,
|
.rc_codes = RC_MAP_TECHNISAT_USB2,
|
.module_name = "technisat-usb2",
|
.rc_query = technisat_usb2_rc_query,
|
.allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER,
|
.driver_type = RC_DRIVER_IR_RAW,
|
}
|
};
|
|
static int technisat_usb2_probe(struct usb_interface *intf,
|
const struct usb_device_id *id)
|
{
|
struct dvb_usb_device *dev;
|
|
if (dvb_usb_device_init(intf, &technisat_usb2_devices, THIS_MODULE,
|
&dev, adapter_nr) != 0)
|
return -ENODEV;
|
|
if (dev) {
|
struct technisat_usb2_state *state = dev->priv;
|
state->dev = dev;
|
|
if (!disable_led_control) {
|
INIT_DELAYED_WORK(&state->green_led_work,
|
technisat_usb2_green_led_control);
|
schedule_delayed_work(&state->green_led_work,
|
msecs_to_jiffies(500));
|
}
|
}
|
|
return 0;
|
}
|
|
static void technisat_usb2_disconnect(struct usb_interface *intf)
|
{
|
struct dvb_usb_device *dev = usb_get_intfdata(intf);
|
|
/* work and stuff was only created when the device is is hot-state */
|
if (dev != NULL) {
|
struct technisat_usb2_state *state = dev->priv;
|
if (state != NULL)
|
cancel_delayed_work_sync(&state->green_led_work);
|
}
|
|
dvb_usb_device_exit(intf);
|
}
|
|
static struct usb_driver technisat_usb2_driver = {
|
.name = "dvb_usb_technisat_usb2",
|
.probe = technisat_usb2_probe,
|
.disconnect = technisat_usb2_disconnect,
|
.id_table = technisat_usb2_id_table,
|
};
|
|
module_usb_driver(technisat_usb2_driver);
|
|
MODULE_AUTHOR("Patrick Boettcher <pboettcher@kernellabs.com>");
|
MODULE_DESCRIPTION("Driver for Technisat DVB-S/S2 USB 2.0 device");
|
MODULE_VERSION("1.0");
|
MODULE_LICENSE("GPL");
|
