/* SPDX-License-Identifier: GPL-2.0-only */ 
 | 
/* Linux driver for devices based on the DiBcom DiB0700 USB bridge 
 | 
 * 
 | 
 *  Copyright (C) 2005-6 DiBcom, SA 
 | 
 */ 
 | 
#ifndef _DIB0700_H_ 
 | 
#define _DIB0700_H_ 
 | 
  
 | 
#define DVB_USB_LOG_PREFIX "dib0700" 
 | 
#include "dvb-usb.h" 
 | 
  
 | 
#include "dib07x0.h" 
 | 
  
 | 
extern int dvb_usb_dib0700_debug; 
 | 
#define deb_info(args...)   dprintk(dvb_usb_dib0700_debug,0x01,args) 
 | 
#define deb_fw(args...)     dprintk(dvb_usb_dib0700_debug,0x02,args) 
 | 
#define deb_fwdata(args...) dprintk(dvb_usb_dib0700_debug,0x04,args) 
 | 
#define deb_data(args...)   dprintk(dvb_usb_dib0700_debug,0x08,args) 
 | 
  
 | 
#define REQUEST_SET_USB_XFER_LEN    0x0 /* valid only for firmware version */ 
 | 
                    /* higher than 1.21 */ 
 | 
#define REQUEST_I2C_READ            0x2 
 | 
#define REQUEST_I2C_WRITE           0x3 
 | 
#define REQUEST_POLL_RC             0x4 /* deprecated in firmware v1.20 */ 
 | 
#define REQUEST_JUMPRAM             0x8 
 | 
#define REQUEST_SET_CLOCK           0xB 
 | 
#define REQUEST_SET_GPIO            0xC 
 | 
#define REQUEST_ENABLE_VIDEO        0xF 
 | 
    // 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog) 
 | 
    // 2 Byte: MPEG2 mode:  4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1) 
 | 
    // 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines)    4LSB(     "                "           ) 
 | 
#define REQUEST_SET_I2C_PARAM       0x10 
 | 
#define REQUEST_SET_RC              0x11 
 | 
#define REQUEST_NEW_I2C_READ        0x12 
 | 
#define REQUEST_NEW_I2C_WRITE       0x13 
 | 
#define REQUEST_GET_VERSION         0x15 
 | 
  
 | 
struct dib0700_state { 
 | 
    u8 channel_state; 
 | 
    u16 mt2060_if1[2]; 
 | 
    u8 rc_toggle; 
 | 
    u8 rc_counter; 
 | 
    u8 is_dib7000pc; 
 | 
    u8 fw_use_new_i2c_api; 
 | 
    u8 disable_streaming_master_mode; 
 | 
    u32 fw_version; 
 | 
    u32 nb_packet_buffer_size; 
 | 
    int (*read_status)(struct dvb_frontend *, enum fe_status *); 
 | 
    int (*sleep)(struct dvb_frontend* fe); 
 | 
    u8 buf[255]; 
 | 
    struct i2c_client *i2c_client_demod; 
 | 
    struct i2c_client *i2c_client_tuner; 
 | 
}; 
 | 
  
 | 
int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, 
 | 
            u32 *romversion, u32 *ramversion, u32 *fwtype); 
 | 
int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, 
 | 
             u8 gpio_dir, u8 gpio_val); 
 | 
int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3); 
 | 
int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, 
 | 
            u8 rxlen); 
 | 
int dib0700_download_firmware(struct usb_device *d, 
 | 
                  const struct firmware *fw); 
 | 
int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf); 
 | 
int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); 
 | 
int dib0700_identify_state(struct usb_device *d, 
 | 
               const struct dvb_usb_device_properties *props, 
 | 
               const struct dvb_usb_device_description **desc, 
 | 
               int *cold); 
 | 
int dib0700_change_protocol(struct rc_dev *dev, u64 *rc_proto); 
 | 
int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz); 
 | 
  
 | 
extern struct i2c_algorithm dib0700_i2c_algo; 
 | 
extern int dib0700_device_count; 
 | 
extern int dvb_usb_dib0700_ir_proto; 
 | 
extern struct dvb_usb_device_properties dib0700_devices[]; 
 | 
extern struct usb_device_id dib0700_usb_id_table[]; 
 | 
  
 | 
#endif 
 |