// SPDX-License-Identifier: GPL-2.0
|
/*
|
* kernel/drivers/input/sensors/lsensor/ls_em3071x.c
|
*
|
* Copyright (C) 2020 Rockchip Co.,Ltd.
|
* Author: Wang Jie <dave.wang@rock-chips.com>
|
*/
|
|
#include <linux/interrupt.h>
|
#include <linux/i2c.h>
|
#include <linux/slab.h>
|
#include <linux/irq.h>
|
#include <linux/miscdevice.h>
|
#include <linux/gpio.h>
|
#include <linux/uaccess.h>
|
#include <linux/atomic.h>
|
#include <linux/delay.h>
|
#include <linux/input.h>
|
#include <linux/workqueue.h>
|
#include <linux/freezer.h>
|
#include <linux/of_gpio.h>
|
#ifdef CONFIG_HAS_EARLYSUSPEND
|
#include <linux/earlysuspend.h>
|
#endif
|
#include <linux/sensor-dev.h>
|
|
#define ALS_CMD 0x01
|
#define STA_TUS 0X02
|
#define ALS_DT1 0x09
|
#define ALS_DT2 0X0a
|
#define ALS_THDL1 0X05
|
#define ALS_THDL2 0X06
|
#define ALS_THDH1 0X07
|
|
#define SW_RESET 0X0E
|
|
/* ALS_CMD */
|
#define ALS_SD_ENABLE 0x06
|
#define ALS_SD_DISABLE 0xF8
|
#define ALS_INT_DISABLE (0 << 1)
|
#define ALS_INT_ENABLE (1 << 1)
|
#define ALS_1T_100MS (0 << 2)
|
#define ALS_2T_200MS (1 << 2)
|
#define ALS_4T_400MS (2 << 2)
|
#define ALS_8T_800MS (3 << 2)
|
#define ALS_RANGE_57671 (0 << 6)
|
#define ALS_RANGE_28836 (1 << 6)
|
|
/* PS_CMD */
|
#define PS_SD_ENABLE (0 << 0)
|
#define PS_SD_DISABLE (1 << 0)
|
#define PS_INT_DISABLE (0 << 1)
|
#define PS_INT_ENABLE (1 << 1)
|
#define PS_10T_2MS (0 << 2)
|
#define PS_15T_3MS (1 << 2)
|
#define PS_20T_4MS (2 << 2)
|
#define PS_25T_5MS (3 << 2)
|
#define PS_CUR_100MA (0 << 4)
|
#define PS_CUR_200MA (1 << 4)
|
#define PS_SLP_10MS (0 << 5)
|
#define PS_SLP_30MS (1 << 5)
|
#define PS_SLP_90MS (2 << 5)
|
#define PS_SLP_270MS (3 << 5)
|
#define TRIG_PS_OR_LS (0 << 7)
|
#define TRIG_PS_AND_LS (1 << 7)
|
|
/* STA_TUS */
|
#define STA_PS_INT (1 << 5)
|
#define STA_ALS_INT (1 << 4)
|
|
static int sensor_active(struct i2c_client *client, int enable, int rate)
|
{
|
struct sensor_private_data *sensor =
|
(struct sensor_private_data *) i2c_get_clientdata(client);
|
int result = 0;
|
int status = 0;
|
|
sensor->ops->ctrl_data = sensor_read_reg(client, sensor->ops->ctrl_reg);
|
if (enable) {
|
status = ALS_SD_ENABLE;
|
sensor->ops->ctrl_data |= status;
|
} else {
|
status = ~ALS_SD_ENABLE;
|
sensor->ops->ctrl_data &= status;
|
}
|
|
result = sensor_write_reg(client, sensor->ops->ctrl_reg,
|
sensor->ops->ctrl_data);
|
if (result) {
|
dev_err(&client->dev, "%s:fail to active sensor\n", __func__);
|
return result;
|
}
|
|
dev_dbg(&client->dev, "%s:reg = 0x%x, reg_ctrl = 0x%x, enable= %d\n",
|
__func__,
|
sensor->ops->ctrl_reg, sensor->ops->ctrl_data, enable);
|
|
return result;
|
}
|
|
|
static int sensor_init(struct i2c_client *client)
|
{
|
struct sensor_private_data *sensor =
|
(struct sensor_private_data *) i2c_get_clientdata(client);
|
int result = 0;
|
|
result = sensor->ops->active(client, 0, 0);
|
if (result) {
|
dev_err(&client->dev, "%s: line = %d, result = %d\n",
|
__func__, __LINE__, result);
|
return result;
|
}
|
|
sensor->status_cur = SENSOR_OFF;
|
result = sensor_write_reg(client, SW_RESET, 0);
|
if (result) {
|
dev_err(&client->dev,
|
"%s: fail to set SW_RESET(%d)\n", __func__, result);
|
return result;
|
}
|
|
/* it is important,if not then als can not trig intterupt */
|
result = sensor_write_reg(client, ALS_THDL1, 0);
|
if (result) {
|
dev_err(&client->dev,
|
"%s: fail to set ALS_THDL1(%d)\n", __func__, result);
|
return result;
|
}
|
|
result = sensor_write_reg(client, ALS_THDL2, 0XF0);
|
if (result) {
|
dev_err(&client->dev,
|
"%s: fail to set ALS_THDL2(%d)\n", __func__, result);
|
return result;
|
}
|
|
result = sensor_write_reg(client, ALS_THDH1, 0XFF);
|
if (result) {
|
dev_err(&client->dev,
|
"%s: fail to set ALS_THDH1(%d)\n", __func__, result);
|
return result;
|
}
|
|
result = sensor_write_reg(client, STA_TUS, 0X00);
|
if (result) {
|
dev_err(&client->dev,
|
"%s: fail to set STA_TUS(%d)\n", __func__, result);
|
return result;
|
}
|
|
return result;
|
}
|
|
|
static int light_report_value(struct input_dev *input, int data)
|
{
|
unsigned char index = 0;
|
|
if (data <= 10) {
|
index = 0;
|
goto report;
|
} else if (data <= 60) {
|
index = 1;
|
goto report;
|
} else if (data <= 122) {
|
index = 2;
|
goto report;
|
} else if (data <= 200) {
|
index = 3;
|
goto report;
|
} else if (data <= 400) {
|
index = 4;
|
goto report;
|
} else if (data <= 800) {
|
index = 5;
|
goto report;
|
} else if (data <= 1260) {
|
index = 6;
|
goto report;
|
} else {
|
index = 7;
|
goto report;
|
}
|
|
report:
|
input_report_abs(input, ABS_MISC, index);
|
input_sync(input);
|
|
return index;
|
}
|
|
|
static int sensor_report_value(struct i2c_client *client)
|
{
|
struct sensor_private_data *sensor =
|
(struct sensor_private_data *) i2c_get_clientdata(client);
|
int result = 0;
|
int value = 0;
|
char buffer[2] = {0};
|
char index = 0;
|
|
buffer[0] = sensor_read_reg(client, 0X09);
|
buffer[1] = sensor_read_reg(client, 0X0A);
|
value = ((buffer[1] & 0X0F) << 8) | buffer[0];
|
|
index = light_report_value(sensor->input_dev, value);
|
|
dev_dbg(&client->dev,
|
"%s: value = %d, index = %d\n", __func__, value, index);
|
|
if (sensor->pdata->irq_enable) {
|
value = sensor_read_reg(client, sensor->ops->int_status_reg);
|
if (value & STA_ALS_INT) {
|
value &= ~STA_ALS_INT;
|
result = sensor_write_reg(client,
|
sensor->ops->int_status_reg, value);
|
if (result) {
|
dev_err(&client->dev,
|
"%s:write status reg error(%d)\n",
|
__func__, result);
|
return result;
|
}
|
}
|
}
|
|
return result;
|
}
|
|
static struct sensor_operate light_em3071x_ops = {
|
.name = "ls_em3071x",
|
.type = SENSOR_TYPE_LIGHT,
|
.id_i2c = LIGHT_ID_EM3071X,
|
.read_reg = ALS_DT1,
|
.read_len = 2,
|
.id_reg = SENSOR_UNKNOW_DATA,
|
.id_data = SENSOR_UNKNOW_DATA,
|
.precision = 16,
|
.ctrl_reg = ALS_CMD,
|
.int_status_reg = STA_TUS,
|
.range = {100, 65535},
|
.brightness = {10, 255},
|
.trig = IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
|
.active = sensor_active,
|
.init = sensor_init,
|
.report = sensor_report_value,
|
};
|
|
/****************operate according to sensor chip:end************/
|
static int light_em3071x_probe(struct i2c_client *client,
|
const struct i2c_device_id *devid)
|
{
|
return sensor_register_device(client, NULL, devid, &light_em3071x_ops);
|
}
|
|
static int light_em3071x_remove(struct i2c_client *client)
|
{
|
return sensor_unregister_device(client, NULL, &light_em3071x_ops);
|
}
|
|
static const struct i2c_device_id light_em3071x_id[] = {
|
{"ls_em3071x", LIGHT_ID_EM3071X},
|
{}
|
};
|
|
static struct i2c_driver light_em3071x_driver = {
|
.probe = light_em3071x_probe,
|
.remove = light_em3071x_remove,
|
.shutdown = sensor_shutdown,
|
.id_table = light_em3071x_id,
|
.driver = {
|
.name = "light_em3071x",
|
#ifdef CONFIG_PM
|
.pm = &sensor_pm_ops,
|
#endif
|
},
|
};
|
|
module_i2c_driver(light_em3071x_driver);
|
|
MODULE_AUTHOR("Wang Jie <dave.wang@rock-chips.com>");
|
MODULE_DESCRIPTION("em3071x light driver");
|
MODULE_LICENSE("GPL");
|
