// SPDX-License-Identifier: GPL-2.0-only
|
/*
|
* DRV2665 haptics driver family
|
*
|
* Author: Dan Murphy <dmurphy@ti.com>
|
*
|
* Copyright: (C) 2015 Texas Instruments, Inc.
|
*/
|
|
#include <linux/i2c.h>
|
#include <linux/input.h>
|
#include <linux/module.h>
|
#include <linux/regmap.h>
|
#include <linux/slab.h>
|
#include <linux/delay.h>
|
#include <linux/regulator/consumer.h>
|
|
/* Contol registers */
|
#define DRV2665_STATUS 0x00
|
#define DRV2665_CTRL_1 0x01
|
#define DRV2665_CTRL_2 0x02
|
#define DRV2665_FIFO 0x0b
|
|
/* Status Register */
|
#define DRV2665_FIFO_FULL BIT(0)
|
#define DRV2665_FIFO_EMPTY BIT(1)
|
|
/* Control 1 Register */
|
#define DRV2665_25_VPP_GAIN 0x00
|
#define DRV2665_50_VPP_GAIN 0x01
|
#define DRV2665_75_VPP_GAIN 0x02
|
#define DRV2665_100_VPP_GAIN 0x03
|
#define DRV2665_DIGITAL_IN 0xfc
|
#define DRV2665_ANALOG_IN BIT(2)
|
|
/* Control 2 Register */
|
#define DRV2665_BOOST_EN BIT(1)
|
#define DRV2665_STANDBY BIT(6)
|
#define DRV2665_DEV_RST BIT(7)
|
#define DRV2665_5_MS_IDLE_TOUT 0x00
|
#define DRV2665_10_MS_IDLE_TOUT 0x04
|
#define DRV2665_15_MS_IDLE_TOUT 0x08
|
#define DRV2665_20_MS_IDLE_TOUT 0x0c
|
|
/**
|
* struct drv2665_data -
|
* @input_dev - Pointer to the input device
|
* @client - Pointer to the I2C client
|
* @regmap - Register map of the device
|
* @work - Work item used to off load the enable/disable of the vibration
|
* @regulator - Pointer to the regulator for the IC
|
*/
|
struct drv2665_data {
|
struct input_dev *input_dev;
|
struct i2c_client *client;
|
struct regmap *regmap;
|
struct work_struct work;
|
struct regulator *regulator;
|
};
|
|
/* 8kHz Sine wave to stream to the FIFO */
|
static const u8 drv2665_sine_wave_form[] = {
|
0x00, 0x10, 0x20, 0x2e, 0x3c, 0x48, 0x53, 0x5b, 0x61, 0x65, 0x66,
|
0x65, 0x61, 0x5b, 0x53, 0x48, 0x3c, 0x2e, 0x20, 0x10,
|
0x00, 0xf0, 0xe0, 0xd2, 0xc4, 0xb8, 0xad, 0xa5, 0x9f, 0x9b, 0x9a,
|
0x9b, 0x9f, 0xa5, 0xad, 0xb8, 0xc4, 0xd2, 0xe0, 0xf0, 0x00,
|
};
|
|
static const struct reg_default drv2665_reg_defs[] = {
|
{ DRV2665_STATUS, 0x02 },
|
{ DRV2665_CTRL_1, 0x28 },
|
{ DRV2665_CTRL_2, 0x40 },
|
{ DRV2665_FIFO, 0x00 },
|
};
|
|
static void drv2665_worker(struct work_struct *work)
|
{
|
struct drv2665_data *haptics =
|
container_of(work, struct drv2665_data, work);
|
unsigned int read_buf;
|
int error;
|
|
error = regmap_read(haptics->regmap, DRV2665_STATUS, &read_buf);
|
if (error) {
|
dev_err(&haptics->client->dev,
|
"Failed to read status: %d\n", error);
|
return;
|
}
|
|
if (read_buf & DRV2665_FIFO_EMPTY) {
|
error = regmap_bulk_write(haptics->regmap,
|
DRV2665_FIFO,
|
drv2665_sine_wave_form,
|
ARRAY_SIZE(drv2665_sine_wave_form));
|
if (error) {
|
dev_err(&haptics->client->dev,
|
"Failed to write FIFO: %d\n", error);
|
return;
|
}
|
}
|
}
|
|
static int drv2665_haptics_play(struct input_dev *input, void *data,
|
struct ff_effect *effect)
|
{
|
struct drv2665_data *haptics = input_get_drvdata(input);
|
|
schedule_work(&haptics->work);
|
|
return 0;
|
}
|
|
static void drv2665_close(struct input_dev *input)
|
{
|
struct drv2665_data *haptics = input_get_drvdata(input);
|
int error;
|
|
cancel_work_sync(&haptics->work);
|
|
error = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
|
DRV2665_STANDBY, DRV2665_STANDBY);
|
if (error)
|
dev_err(&haptics->client->dev,
|
"Failed to enter standby mode: %d\n", error);
|
}
|
|
static const struct reg_sequence drv2665_init_regs[] = {
|
{ DRV2665_CTRL_2, 0 | DRV2665_10_MS_IDLE_TOUT },
|
{ DRV2665_CTRL_1, DRV2665_25_VPP_GAIN },
|
};
|
|
static int drv2665_init(struct drv2665_data *haptics)
|
{
|
int error;
|
|
error = regmap_register_patch(haptics->regmap,
|
drv2665_init_regs,
|
ARRAY_SIZE(drv2665_init_regs));
|
if (error) {
|
dev_err(&haptics->client->dev,
|
"Failed to write init registers: %d\n",
|
error);
|
return error;
|
}
|
|
return 0;
|
}
|
|
static const struct regmap_config drv2665_regmap_config = {
|
.reg_bits = 8,
|
.val_bits = 8,
|
|
.max_register = DRV2665_FIFO,
|
.reg_defaults = drv2665_reg_defs,
|
.num_reg_defaults = ARRAY_SIZE(drv2665_reg_defs),
|
.cache_type = REGCACHE_NONE,
|
};
|
|
static int drv2665_probe(struct i2c_client *client,
|
const struct i2c_device_id *id)
|
{
|
struct drv2665_data *haptics;
|
int error;
|
|
haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
|
if (!haptics)
|
return -ENOMEM;
|
|
haptics->regulator = devm_regulator_get(&client->dev, "vbat");
|
if (IS_ERR(haptics->regulator)) {
|
error = PTR_ERR(haptics->regulator);
|
dev_err(&client->dev,
|
"unable to get regulator, error: %d\n", error);
|
return error;
|
}
|
|
haptics->input_dev = devm_input_allocate_device(&client->dev);
|
if (!haptics->input_dev) {
|
dev_err(&client->dev, "Failed to allocate input device\n");
|
return -ENOMEM;
|
}
|
|
haptics->input_dev->name = "drv2665:haptics";
|
haptics->input_dev->dev.parent = client->dev.parent;
|
haptics->input_dev->close = drv2665_close;
|
input_set_drvdata(haptics->input_dev, haptics);
|
input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
|
|
error = input_ff_create_memless(haptics->input_dev, NULL,
|
drv2665_haptics_play);
|
if (error) {
|
dev_err(&client->dev, "input_ff_create() failed: %d\n",
|
error);
|
return error;
|
}
|
|
INIT_WORK(&haptics->work, drv2665_worker);
|
|
haptics->client = client;
|
i2c_set_clientdata(client, haptics);
|
|
haptics->regmap = devm_regmap_init_i2c(client, &drv2665_regmap_config);
|
if (IS_ERR(haptics->regmap)) {
|
error = PTR_ERR(haptics->regmap);
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
error);
|
return error;
|
}
|
|
error = drv2665_init(haptics);
|
if (error) {
|
dev_err(&client->dev, "Device init failed: %d\n", error);
|
return error;
|
}
|
|
error = input_register_device(haptics->input_dev);
|
if (error) {
|
dev_err(&client->dev, "couldn't register input device: %d\n",
|
error);
|
return error;
|
}
|
|
return 0;
|
}
|
|
static int __maybe_unused drv2665_suspend(struct device *dev)
|
{
|
struct drv2665_data *haptics = dev_get_drvdata(dev);
|
int ret = 0;
|
|
mutex_lock(&haptics->input_dev->mutex);
|
|
if (haptics->input_dev->users) {
|
ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
|
DRV2665_STANDBY, DRV2665_STANDBY);
|
if (ret) {
|
dev_err(dev, "Failed to set standby mode\n");
|
regulator_disable(haptics->regulator);
|
goto out;
|
}
|
|
ret = regulator_disable(haptics->regulator);
|
if (ret) {
|
dev_err(dev, "Failed to disable regulator\n");
|
regmap_update_bits(haptics->regmap,
|
DRV2665_CTRL_2,
|
DRV2665_STANDBY, 0);
|
}
|
}
|
out:
|
mutex_unlock(&haptics->input_dev->mutex);
|
return ret;
|
}
|
|
static int __maybe_unused drv2665_resume(struct device *dev)
|
{
|
struct drv2665_data *haptics = dev_get_drvdata(dev);
|
int ret = 0;
|
|
mutex_lock(&haptics->input_dev->mutex);
|
|
if (haptics->input_dev->users) {
|
ret = regulator_enable(haptics->regulator);
|
if (ret) {
|
dev_err(dev, "Failed to enable regulator\n");
|
goto out;
|
}
|
|
ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
|
DRV2665_STANDBY, 0);
|
if (ret) {
|
dev_err(dev, "Failed to unset standby mode\n");
|
regulator_disable(haptics->regulator);
|
goto out;
|
}
|
|
}
|
|
out:
|
mutex_unlock(&haptics->input_dev->mutex);
|
return ret;
|
}
|
|
static SIMPLE_DEV_PM_OPS(drv2665_pm_ops, drv2665_suspend, drv2665_resume);
|
|
static const struct i2c_device_id drv2665_id[] = {
|
{ "drv2665", 0 },
|
{ }
|
};
|
MODULE_DEVICE_TABLE(i2c, drv2665_id);
|
|
#ifdef CONFIG_OF
|
static const struct of_device_id drv2665_of_match[] = {
|
{ .compatible = "ti,drv2665", },
|
{ }
|
};
|
MODULE_DEVICE_TABLE(of, drv2665_of_match);
|
#endif
|
|
static struct i2c_driver drv2665_driver = {
|
.probe = drv2665_probe,
|
.driver = {
|
.name = "drv2665-haptics",
|
.of_match_table = of_match_ptr(drv2665_of_match),
|
.pm = &drv2665_pm_ops,
|
},
|
.id_table = drv2665_id,
|
};
|
module_i2c_driver(drv2665_driver);
|
|
MODULE_DESCRIPTION("TI DRV2665 haptics driver");
|
MODULE_LICENSE("GPL");
|
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
|
