config XENO_DRIVERS_CAN_SJA1000
|
depends on XENO_DRIVERS_CAN
|
tristate "Philips SJA1000 CAN controller"
|
select XENO_DRIVERS_CAN_BUS_ERR
|
|
config XENO_DRIVERS_CAN_SJA1000_ISA
|
depends on XENO_DRIVERS_CAN_SJA1000
|
tristate "Standard ISA controllers"
|
help
|
|
This driver is for CAN devices connected to the ISA bus of a PC
|
or a PC/104 system. The I/O port, interrupt number and a few other
|
hardware specific parameters can be defined via module parameters.
|
|
config XENO_DRIVERS_CAN_SJA1000_MEM
|
depends on XENO_DRIVERS_CAN_SJA1000
|
tristate "Memory mapped controllers"
|
help
|
|
This driver is for memory mapped CAN devices. The memory address,
|
interrupt number and a few other hardware specific parameters can
|
be defined via module parameters.
|
|
config XENO_DRIVERS_CAN_SJA1000_PEAK_PCI
|
depends on XENO_DRIVERS_CAN_SJA1000 && PCI
|
tristate "PEAK PCI Card"
|
help
|
|
This driver is for the PCAN PCI, the PC-PCI CAN plug-in card (1 or
|
2 channel) from PEAK Systems (http://www.peak-system.com). To get
|
the second channel working, Xenomai's shared interrupt support
|
must be enabled.
|
|
config XENO_DRIVERS_CAN_SJA1000_IXXAT_PCI
|
depends on XENO_DRIVERS_CAN_SJA1000 && PCI
|
tristate "IXXAT PCI Card"
|
help
|
|
This driver is for the IXXAT PC-I 04/PCI card (1 or 2 channel)
|
from the IXXAT Automation GmbH (http://www.ixxat.de). To get
|
the second channel working, Xenomai's shared interrupt support
|
must be enabled.
|
|
config XENO_DRIVERS_CAN_SJA1000_ADV_PCI
|
depends on XENO_DRIVERS_CAN_SJA1000 && PCI
|
tristate "ADVANTECH PCI Cards"
|
help
|
|
This driver is for the ADVANTECH PCI cards (1 or more channels)
|
It supports the 1680U and some other ones.
|
|
|
config XENO_DRIVERS_CAN_SJA1000_PLX_PCI
|
depends on XENO_DRIVERS_CAN_SJA1000 && PCI
|
tristate "PLX90xx PCI-bridge based Cards"
|
help
|
|
This driver is for CAN interface cards based on
|
the PLX90xx PCI bridge.
|
Driver supports now:
|
- Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
|
- Adlink PCI-7841/cPCI-7841 SE card
|
- esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
|
- esd CAN-PCI/PMC/266
|
- esd CAN-PCIe/2000
|
- Marathon CAN-bus-PCI card (http://www.marathon.ru/)
|
- TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
|
|
config XENO_DRIVERS_CAN_SJA1000_EMS_PCI
|
depends on XENO_DRIVERS_CAN_SJA1000 && PCI
|
tristate "EMS CPC PCI Card"
|
help
|
|
This driver is for the 2 channel CPC PCI card from EMS Dr. Thomas
|
Wünsche (http://www.ems-wuensche.de). To get the second channel
|
working, Xenomai's shared interrupt support must be enabled.
|
|
config XENO_DRIVERS_CAN_SJA1000_ESD_PCI
|
depends on XENO_DRIVERS_CAN_SJA1000 && PCI
|
tristate "ESD PCI Cards (DEPRECATED)"
|
help
|
|
This driver supports the esd PCI CAN cards CAN-PCI/200,
|
CAN-PCI/266, CAN-PMC/266 (PMC), CAN-CPCI/200 (CompactPCI),
|
CAN-PCIe2000 (PCI Express) and CAN-PCI104/200 (PCI104)
|
from the esd electronic system design gmbh (http://www.esd.eu).
|
|
This driver is deprecated. It's functionality is now provided by
|
"PLX90xx PCI-bridge based Cards" driver.
|
|
config XENO_DRIVERS_CAN_SJA1000_PEAK_DNG
|
depends on XENO_DRIVERS_CAN_SJA1000 && !PARPORT
|
tristate "PEAK Parallel Port Dongle"
|
help
|
|
This driver is for the PCAN Dongle, the PC parallel port to CAN
|
converter from PEAK Systems (http://www.peak-system.com). You need
|
to disable parallel port support in the kernel (CONFIG_PARPORT) for
|
proper operation. The interface type (sp or epp), I/O port and
|
interrupt number should be defined via module parameters.
|
