hc
2024-11-01 2f529f9b558ca1c1bd74be7437a84e4711743404
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
/* SPDX-License-Identifier: GPL-2.0 */
/* linux/spi/ads7846.h */
 
/* Touchscreen characteristics vary between boards and models.  The
 * platform_data for the device's "struct device" holds this information.
 *
 * It's OK if the min/max values are zero.
 */
enum ads7846_filter {
   ADS7846_FILTER_OK,
   ADS7846_FILTER_REPEAT,
   ADS7846_FILTER_IGNORE,
};
 
struct ads7846_platform_data {
   u16    model;            /* 7843, 7845, 7846, 7873. */
   u16    vref_delay_usecs;    /* 0 for external vref; etc */
   u16    vref_mv;        /* external vref value, milliVolts
                    * ads7846: if 0, use internal vref */
   bool    keep_vref_on;        /* set to keep vref on for differential
                    * measurements as well */
   bool    swap_xy;        /* swap x and y axes */
 
   /* Settling time of the analog signals; a function of Vcc and the
    * capacitance on the X/Y drivers.  If set to non-zero, two samples
    * are taken with settle_delay us apart, and the second one is used.
    * ~150 uSec with 0.01uF caps.
    */
   u16    settle_delay_usecs;
 
   /* If set to non-zero, after samples are taken this delay is applied
    * and penirq is rechecked, to help avoid false events.  This value
    * is affected by the material used to build the touch layer.
    */
   u16    penirq_recheck_delay_usecs;
 
   u16    x_plate_ohms;
   u16    y_plate_ohms;
 
   u16    x_min, x_max;
   u16    y_min, y_max;
   u16    pressure_min, pressure_max;
 
   u16    debounce_max;        /* max number of additional readings
                    * per sample */
   u16    debounce_tol;        /* tolerance used for filtering */
   u16    debounce_rep;        /* additional consecutive good readings
                    * required after the first two */
   int    gpio_pendown;        /* the GPIO used to decide the pendown
                    * state if get_pendown_state == NULL */
   int    gpio_pendown_debounce;    /* platform specific debounce time for
                    * the gpio_pendown */
   int    (*get_pendown_state)(void);
   int    (*filter_init)    (const struct ads7846_platform_data *pdata,
                void **filter_data);
   int    (*filter)    (void *filter_data, int data_idx, int *val);
   void    (*filter_cleanup)(void *filter_data);
   void    (*wait_for_sync)(void);
   bool    wakeup;
   unsigned long irq_flags;
};