hc
2024-08-12 233ab1bd4c5697f5cdec94e60206e8c6ac609b4c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
/*
 * (C) Copyright 2008-2010
 * GraÅžvydas Ignotas <notasas@gmail.com>
 *
 * Configuration settings for the OMAP3 Pandora.
 *
 * SPDX-License-Identifier:    GPL-2.0+
 */
 
#ifndef __CONFIG_H
#define __CONFIG_H
 
#define CONFIG_NR_DRAM_BANKS    2    /* CS1 may or may not be populated */
 
/* override base for compatibility with MLO the device ships with */
#define CONFIG_SYS_TEXT_BASE        0x80008000
 
#include <configs/ti_omap3_common.h>
 
#define CONFIG_MISC_INIT_R
#define CONFIG_REVISION_TAG        1
 
#define CONFIG_ENV_SIZE            (128 << 10)    /* 128 KiB */
 
#define CONFIG_SYS_DEVICE_NULLDEV    1
 
/*
 * Hardware drivers
 */
 
/* TWL4030 LED */
#define CONFIG_TWL4030_LED
 
/*
 * NS16550 Configuration
 */
#undef CONFIG_SYS_NS16550_CLK
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
#define CONFIG_SYS_NS16550_CLK        V_NS16550_CLK
#define CONFIG_SYS_NS16550_COM3        OMAP34XX_UART3
#define CONFIG_SERIAL3            3
 
/* commands to include */
 
/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_ADDR        NAND_BASE    /* physical address */
                           /* to access nand */
#define CONFIG_NAND_OMAP_ECCSCHEME    OMAP_ECC_HAM1_CODE_SW
#define CONFIG_SYS_NAND_PAGE_SIZE    2048
#define CONFIG_SYS_NAND_OOBSIZE        64
 
 
#define CONFIG_BOOTCOMMAND \
   "run distro_bootcmd; " \
   "setenv bootargs ${bootargs_ubi}; " \
   "if mmc rescan && load mmc 0:1 ${loadaddr} autoboot.scr; then " \
       "source ${loadaddr}; " \
   "fi; " \
   "ubi part boot && ubifsmount ubi:boot && " \
       "ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
 
#define BOOT_TARGET_DEVICES(func) \
   func(MMC, mmc, 0) \
 
#include <config_distro_bootcmd.h>
 
#define CONFIG_EXTRA_ENV_SETTINGS \
   DEFAULT_LINUX_BOOT_ENV \
   "usbtty=cdc_acm\0" \
   "bootargs_ubi=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
       "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
   "mtdparts=" MTDPARTS_DEFAULT "\0" \
   BOOTENV \
 
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START    (OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END        (OMAP34XX_SDRC_CS0 + \
                   0x01F00000) /* 31MB */
 
#if defined(CONFIG_NAND)
#define CONFIG_SYS_FLASH_BASE        NAND_BASE
#endif
 
/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
 
#define SMNAND_ENV_OFFSET        0x260000 /* environment starts here */
 
#define CONFIG_SYS_ENV_SECT_SIZE    (128 << 10)    /* 128 KiB */
#define CONFIG_ENV_OFFSET        SMNAND_ENV_OFFSET
#define CONFIG_ENV_ADDR            SMNAND_ENV_OFFSET
 
#endif                /* __CONFIG_H */