// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
/*
|
* Copyright (c) 2023 Wesion Technology Co., Ltd.
|
*
|
*/
|
|
/dts-v1/;
|
|
#include "dt-bindings/usb/pd.h"
|
#include "rk3588s.dtsi"
|
#include "rk3588s-khadas-edge2.dtsi"
|
#include "rk3588-rk806-single-khadas.dtsi"
|
#include "rk3588-linux.dtsi"
|
#include "rk3588s-khadas-edge2-camera.dtsi"
|
|
/ {
|
model = "Khadas Edge2";
|
compatible = "khadas,edge2", "rockchip,rk3588";
|
/delete-node/ chosen;
|
|
combophy_avdd0v85: combophy-avdd0v85 {
|
compatible = "regulator-fixed";
|
regulator-name = "combophy_avdd0v85";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <850000>;
|
regulator-max-microvolt = <850000>;
|
vin-supply = <&vdd_0v85_s0>;
|
};
|
|
combophy_avdd1v8: combophy-avdd1v8 {
|
compatible = "regulator-fixed";
|
regulator-name = "combophy_avdd1v8";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
vin-supply = <&avcc_1v8_s0>;
|
};
|
|
sound_micarray: sound-micarray {
|
status = "okay";
|
compatible = "simple-audio-card";
|
simple-audio-card,format = "i2s";
|
simple-audio-card,name = "rockchip,sound-micarray";
|
simple-audio-card,mclk-fs = <256>;
|
simple-audio-card,dai-link@0 {
|
format = "pdm";
|
cpu {
|
sound-dai = <&pdm0>;
|
};
|
codec {
|
sound-dai = <&dummy_codec>;
|
};
|
};
|
};
|
|
dummy_codec: dummy-codec {
|
compatible = "rockchip,dummy-codec";
|
#sound-dai-cells = <0>;
|
status = "okay";
|
};
|
|
es8316_sound: es8316-sound {
|
compatible = "simple-audio-card";
|
simple-audio-card,format = "i2s";
|
simple-audio-card,mclk-fs = <256>;
|
simple-audio-card,name = "rockchip,es8316-codec";
|
simple-audio-card,dai-link@0 {
|
format = "i2s";
|
cpu {
|
sound-dai = <&i2s0_8ch>;
|
};
|
codec {
|
sound-dai = <&es8316>;
|
};
|
};
|
};
|
|
leds {
|
compatible = "gpio-leds";
|
pinctrl-names = "default";
|
pinctrl-0 = <&red_led_gpio &green_led_gpio &blue_led_gpio>;
|
|
red_led {
|
gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
|
label = "red_led";
|
linux,default-trigger = "none";
|
default-state = "off";
|
};
|
|
green_led {
|
gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
label = "green_led";
|
linux,default-trigger = "default-on";
|
default-state = "on";
|
};
|
|
blue_led {
|
gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
label = "blue_led";
|
linux,default-trigger = "none";
|
default-state = "off";
|
};
|
};
|
|
khadas_wdt {
|
compatible = "linux,wdt-khadas";
|
status = "okay";
|
hw_margin_ms = <500>;
|
hw-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
|
};
|
|
vbus5v0_typec: vbus5v0-typec {
|
compatible = "regulator-fixed";
|
regulator-name = "vbus5v0_typec";
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
enable-active-high;
|
gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc5v0_usb>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&typec5v_pwren>;
|
};
|
|
vcc3v3_pcie20: vcc3v3-pcie20 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3_pcie20";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
enable-active-high;
|
gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
startup-delay-us = <5000>;
|
vin-supply = <&vcc12v_dcin>;
|
};
|
|
vcc5v0_host: vcc5v0-host {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_host";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
enable-active-high;
|
gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc5v0_usb>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&vcc5v0_host_en>;
|
};
|
|
vcc_sd: vcc-sd {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc_sd";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
enable-active-high;
|
gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc_3v3_s3>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&vcc_sd_en>;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
wireless_bluetooth: wireless-bluetooth {
|
compatible = "bluetooth-platdata";
|
clocks = <&pt7c4363>;
|
clock-names = "ext_clock";
|
uart_rts_gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default", "rts_gpio";
|
pinctrl-0 = <&uart9m2_rtsn>, <&bt_gpio>;
|
pinctrl-1 = <&uart9_gpios>;
|
BT,reset_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
BT,wake_gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
BT,wake_host_irq = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
|
bt-sound {
|
compatible = "simple-audio-card";
|
simple-audio-card,format = "dsp_a";
|
simple-audio-card,bitclock-inversion = <1>;
|
simple-audio-card,mclk-fs = <256>;
|
simple-audio-card,name = "rockchip,bt";
|
simple-audio-card,cpu {
|
sound-dai = <&i2s2_2ch>;
|
};
|
simple-audio-card,codec {
|
sound-dai = <&bt_sco>;
|
};
|
};
|
|
bt_sco: bt-sco {
|
compatible = "delta,dfbmcs320";
|
#sound-dai-cells = <0>;
|
status = "okay";
|
};
|
|
wireless_wlan: wireless-wlan {
|
compatible = "wlan-platdata";
|
wifi_chip_type = "ap6275p";
|
pinctrl-names = "default";
|
pinctrl-0 = <&wifi_host_wake_irq>;
|
WIFI,host_wake_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
// WIFI,poweren_gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
|
vcc3v3_lcd1_en: vcc3v3-lcd1-en {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3_lcd1_en";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
gpio = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
|
enable-active-high;
|
regulator-boot-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
|
};
|
|
vcc3v3_lcd2_en: vcc3v3-lcd2-en {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3_lcd2_en";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
enable-active-high;
|
regulator-boot-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
|
};
|
|
};
|
|
&backlight_mipi0 {
|
pwms = <&pwm12 0 25000 0>;
|
power-supply = <&vcc3v3_lcd1_en>;
|
status = "okay";
|
};
|
|
&backlight_mipi1 {
|
pwms = <&pwm13 0 25000 0>;
|
power-supply = <&vcc3v3_lcd2_en>;
|
status = "disabled";
|
};
|
|
|
&combphy0_ps {
|
status = "okay";
|
};
|
|
&dp0 {
|
status = "okay";
|
};
|
|
&dp0_in_vp2 {
|
status = "okay";
|
};
|
|
&dp0_sound{
|
status = "okay";
|
};
|
|
&dsi0 {
|
status = "disabled";
|
reset-delay-ms = <20>;
|
reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&lcd1_rst_gpio>;
|
|
};
|
|
&dsi0_panel {
|
status = "okay";
|
power-supply = <&vcc3v3_lcd1_en>;
|
};
|
|
&dsi0_in_vp2 {
|
status = "disabled";
|
};
|
|
&dsi0_in_vp3 {
|
status = "okay";
|
};
|
|
&hdmi0_sound {
|
status = "okay";
|
};
|
|
&route_dsi0 {
|
status = "okay";
|
connect = <&vp3_out_dsi0>;
|
};
|
|
&mipi_dcphy0 {
|
status = "okay";
|
};
|
|
&dsi1 {
|
reset-delay-ms = <20>;
|
reset-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&lcd2_rst_gpio1>;
|
status = "disabled";
|
};
|
|
&dsi1_panel {
|
status = "disabled";
|
power-supply = <&vcc3v3_lcd2_en>;
|
};
|
|
&mipi_dcphy1 {
|
status = "okay";
|
};
|
|
&dsi1_in_vp2 {
|
status = "disabled";
|
};
|
|
&dsi1_in_vp3 {
|
status = "disabled";
|
};
|
|
&route_dsi1 {
|
status = "disabled";
|
connect = <&vp3_out_dsi1>;
|
};
|
|
//&hdptxphy0 {
|
/* Single Vdiff Training Table for power reduction (optional) */
|
// training-table = /bits/ 8 <
|
/* voltage swing 0, pre-emphasis 0->3 */
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
/* voltage swing 1, pre-emphasis 0->2 */
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
/* voltage swing 2, pre-emphasis 0->1 */
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
/* voltage swing 3, pre-emphasis 0 */
|
// 0x0d 0x00 0x00 0x00 0x00 0x00
|
// >;
|
// status = "okay";
|
//};
|
|
&hdmi0 {
|
enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
|
&hdmi0_in_vp0 {
|
status = "okay";
|
};
|
|
&hdptxphy_hdmi0 {
|
status = "okay";
|
};
|
|
&i2s2_2ch {
|
status = "okay";
|
};
|
|
&i2c0 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 {
|
compatible = "rockchip,rk8602";
|
reg = <0x42>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "rk860x-reg";
|
regulator-name = "vdd_cpu_big0_s0";
|
regulator-min-microvolt = <550000>;
|
regulator-max-microvolt = <1050000>;
|
regulator-ramp-delay = <12500>;
|
rockchip,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 {
|
compatible = "rockchip,rk8603";
|
reg = <0x43>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "rk860x-reg";
|
regulator-name = "vdd_cpu_big1_s0";
|
regulator-min-microvolt = <550000>;
|
regulator-max-microvolt = <1050000>;
|
regulator-ramp-delay = <12500>;
|
rockchip,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
};
|
|
&i2s5_8ch {
|
status = "okay";
|
};
|
|
&i2c2 {
|
|
status = "okay";
|
|
vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 {
|
compatible = "rockchip,rk8602";
|
reg = <0x42>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "rk860x-reg";
|
regulator-name = "vdd_npu_s0";
|
regulator-min-microvolt = <550000>;
|
regulator-max-microvolt = <950000>;
|
regulator-ramp-delay = <12500>;
|
rockchip,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
usbc0: fusb302@22 {
|
compatible = "fcs,fusb302";
|
reg = <0x22>;
|
interrupt-parent = <&gpio1>;
|
interrupts = <RK_PB5 IRQ_TYPE_LEVEL_LOW>;
|
int-n-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&usbc0_int>;
|
vbus-supply = <&vbus5v0_typec>;
|
status = "okay";
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
usbc0_role_sw: endpoint@0 {
|
remote-endpoint = <&dwc3_0_role_switch>;
|
};
|
};
|
};
|
|
usb_con: connector {
|
compatible = "usb-c-connector";
|
label = "USB-C";
|
data-role = "dual";
|
power-role = "dual";
|
try-power-role = "sink";
|
op-sink-microwatt = <1000000>;
|
sink-pdos =
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
|
PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
|
source-pdos =
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
altmodes {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
altmode@0 {
|
reg = <0>;
|
svid = <0xff01>;
|
vdo = <0xffffffff>;
|
};
|
};
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
usbc0_orien_sw: endpoint {
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
};
|
};
|
|
port@1 {
|
reg = <1>;
|
dp_altmode_mux: endpoint {
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
};
|
};
|
};
|
};
|
};
|
|
pt7c4363: pt7c4363@51 {
|
compatible = "haoyu,hym8563";
|
reg = <0x51>;
|
#clock-cells = <0>;
|
clock-frequency = <32768>;
|
clock-output-names = "pt7c4363";
|
wakeup-source;
|
};
|
|
mcu: khadas-mcu@18 {
|
compatible = "khadas-mcu";
|
status = "okay";
|
reg = <0x18>;
|
fan,trig_temp_level0 = <50>;
|
fan,trig_temp_level1 = <60>;
|
fan,trig_temp_level2 = <70>;
|
fan,trig_temp_level3 = <80>;
|
hwver = "EDGE2.V11";
|
|
};
|
};
|
|
&reboot_mode {
|
mode-reboot_test = <BOOT_QUIESCENT>;
|
};
|
|
&i2c3 {
|
status = "okay";
|
|
gs_kxtj3: gs_kxtj3@e {
|
compatible = "gs_kxtj3";
|
reg = <0x0e>;
|
irq-gpio = <&gpio1 RK_PB0 IRQ_TYPE_EDGE_RISING>;
|
irq_enable = <0>;
|
poll_delay_ms = <30>;
|
type = <SENSOR_TYPE_ACCEL>;
|
layout = <0>;
|
status = "okay";
|
};
|
|
es8316: es8316@10 {
|
status = "okay";
|
#sound-dai-cells = <0>;
|
compatible = "everest,es8316";
|
reg = <0x10>;
|
clocks = <&mclkout_i2s0>;
|
clock-names = "mclk";
|
assigned-clocks = <&mclkout_i2s0>;
|
assigned-clock-rates = <12288000>;
|
pinctrl-names = "default","hp_det","spk_con";
|
pinctrl-0 = <&i2s0_mclk>,<&hp_det>,<&spk_con>;
|
spk-con-gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
|
hp-det-gpio = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
|
};
|
|
};
|
|
&i2c4 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c4m3_xfer>;
|
status = "okay";
|
};
|
|
&i2c5 {
|
status = "disabled";
|
|
ls_stk3332: light@47 {
|
compatible = "ls_stk3332";
|
status = "disabled";
|
reg = <0x47>;
|
type = <SENSOR_TYPE_LIGHT>;
|
irq_enable = <0>;
|
als_threshold_high = <100>;
|
als_threshold_low = <10>;
|
als_ctrl_gain = <2>; /* 0:x1 1:x4 2:x16 3:x64 */
|
poll_delay_ms = <100>;
|
};
|
|
ps_stk3332: proximity@47 {
|
compatible = "ps_stk3332";
|
status = "disabled";
|
reg = <0x47>;
|
type = <SENSOR_TYPE_PROXIMITY>;
|
//pinctrl-names = "default";
|
//pinctrl-0 = <&gpio3_c6>;
|
//irq-gpio = <&gpio3 RK_PC6 IRQ_TYPE_LEVEL_LOW>;
|
//irq_enable = <1>;
|
ps_threshold_high = <0x200>;
|
ps_threshold_low = <0x100>;
|
ps_ctrl_gain = <3>; /* 0:x1 1:x2 2:x5 3:x8 */
|
ps_led_current = <4>; /* 0:3.125mA 1:6.25mA 2:12.5mA 3:25mA 4:50mA 5:100mA*/
|
poll_delay_ms = <100>;
|
};
|
|
mpu6500_acc: mpu_acc@68 {
|
compatible = "mpu6500_acc";
|
reg = <0x68>;
|
irq-gpio = <&gpio3 RK_PB4 IRQ_TYPE_EDGE_RISING>;
|
irq_enable = <0>;
|
poll_delay_ms = <30>;
|
type = <SENSOR_TYPE_ACCEL>;
|
layout = <5>;
|
};
|
|
mpu6500_gyro: mpu_gyro@68 {
|
compatible = "mpu6500_gyro";
|
reg = <0x68>;
|
poll_delay_ms = <30>;
|
type = <SENSOR_TYPE_GYROSCOPE>;
|
layout = <5>;
|
};
|
};
|
|
&i2c6 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c6m0_xfer>;
|
|
ft5336@38 {
|
compatible = "edt,edt-ft5336", "ft5x06";
|
reg = <0x38>;
|
interrupt-parent = <&gpio0>;
|
interrupts = <RK_PC6 IRQ_TYPE_EDGE_FALLING>;
|
reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&tp_rst_gpio>;
|
status = "okay";
|
};
|
|
gt9xx: gt9xx@14 {
|
compatible = "goodix,gt9xx";
|
reg = <0x14>;
|
touch-gpio = <&gpio0 RK_PC6 IRQ_TYPE_LEVEL_LOW>;
|
reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
max-x = <1920>;
|
max-y = <1200>;
|
tp-size = <89>;
|
};
|
|
};
|
|
&pcie2x1l1 {
|
// reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
vpcie3v3-supply = <&vcc3v3_pcie20>;
|
status = "disabled";
|
};
|
|
&pcie2x1l2 {
|
// reset-gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
|
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
vpcie3v3-supply = <&vcc3v3_pcie20>;
|
rockchip,skip-scan-in-resume;
|
status = "okay";
|
};
|
|
&pdm0 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&pdm0m0_clk
|
&pdm0m0_clk1
|
&pdm0m0_sdi0
|
&pdm0m0_sdi1
|
&pdm0m0_sdi2>;
|
rockchip,path-map = <0 1 2 3>;
|
status = "okay";
|
};
|
|
&pinctrl {
|
audio {
|
hp_det: hp-det {
|
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
spk_con: spk-con {
|
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
|
};
|
};
|
|
lcd {
|
lcd1_rst_gpio: lcd1-rst-gpio {
|
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
lcd2_rst_gpio1: lcd2-rst-gpio1 {
|
rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
leds {
|
red_led_gpio: red-led-gpio {
|
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
|
green_led_gpio: green-led-gpio {
|
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
|
blue_led_gpio: blue-led-gpio {
|
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
usb {
|
vcc5v0_host_en: vcc5v0-host-en {
|
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
vcc_sd {
|
vcc_sd_en: vcc-sd-en {
|
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
usb-typec {
|
usbc0_int: usbc0-int {
|
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
|
typec5v_pwren: typec5v-pwren {
|
rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
ft5336 {
|
tp_rst_gpio: tp-rst-gpio {
|
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
wireless-bluetooth {
|
uart9_gpios: uart9-gpios {
|
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
|
bt_gpio: bt-gpio {
|
rockchip,pins =
|
<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
|
<0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
|
<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
|
};
|
};
|
|
wireless-wlan {
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
};
|
|
// wifi_poweren_gpio: wifi-poweren-gpio {
|
// rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
// };
|
};
|
};
|
|
&pwm3 {
|
compatible = "rockchip,remotectl-pwm";
|
pinctrl-names = "default";
|
pinctrl-0 = <&pwm3m3_pins>;
|
remote_pwm_id = <3>;
|
handle_cpu_id = <1>;
|
remote_support_psci = <0>;
|
status = "okay";
|
|
ir_key1 {
|
rockchip,usercode = <0xff00>;
|
rockchip,key_table =
|
<0xeb KEY_POWER>,
|
<0xec KEY_MENU>,
|
<0xfc KEY_UP>,
|
<0xfd KEY_DOWN>,
|
<0xf1 KEY_LEFT>,
|
<0xe5 KEY_RIGHT>,
|
<0xf8 KEY_ENTER>,
|
<0xa7 KEY_VOLUMEDOWN>,
|
<0xa3 388>,
|
<0xa4 388>,
|
<0xf4 KEY_VOLUMEUP>,
|
<0xfe KEY_BACK>,
|
<0xb7 KEY_HOMEPAGE>;
|
};
|
};
|
|
&pwm7 {
|
pinctrl-0 = <&pwm7m0_pins>;
|
status = "disabled";
|
};
|
|
&pwm12 {
|
pinctrl-0 = <&pwm12m1_pins>;
|
status = "okay";
|
};
|
|
&pwm13 {
|
pinctrl-0 = <&pwm13m1_pins>;
|
status = "okay";
|
};
|
|
|
&rockchip_suspend {
|
|
rockchip,sleep-mode-config = <
|
(0
|
| RKPM_SLP_ARMOFF_DDRPD
|
| RKPM_SLP_PMU_PMUALIVE_32K
|
| RKPM_SLP_PMU_DIS_OSC
|
| RKPM_SLP_32K_EXT
|
| RKPM_SLP_PMU_DBG
|
)
|
>;
|
};
|
|
&route_hdmi0 {
|
status = "okay";
|
connect = <&vp0_out_hdmi0>;
|
/delete-property/ force-output;
|
/delete-node/ force_timing;
|
};
|
|
&sdmmc {
|
status = "okay";
|
card-detect-delay = <1200>;
|
};
|
|
&sfc {
|
pinctrl-names = "default";
|
pinctrl-0 = <&fspim2_pins>;
|
status = "okay";
|
};
|
|
&spdif_tx1 {
|
status = "disabled";
|
pinctrl-names = "default";
|
pinctrl-0 = <&spdif1m1_tx>;
|
};
|
|
&spdif_tx1_dc {
|
status = "disabled";
|
};
|
|
&spdif_tx1_sound {
|
status = "disabled";
|
};
|
|
&spdif_tx2 {
|
status = "okay";
|
};
|
|
&spi1 {
|
status = "disabled";
|
pinctrl-names = "default";
|
pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
|
};
|
|
&tsadc {
|
status = "okay";
|
};
|
|
&u2phy0_otg {
|
rockchip,typec-vbus-det;
|
};
|
|
&u2phy2_host {
|
phy-supply = <&vcc5v0_host>;
|
};
|
|
&u2phy3_host {
|
phy-supply = <&vcc5v0_host>;
|
};
|
|
&uart9 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
|
};
|
|
&usbdp_phy0 {
|
orientation-switch;
|
svid = <0xff01>;
|
sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
|
sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
|
|
port {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
reg = <0>;
|
remote-endpoint = <&usbc0_orien_sw>;
|
};
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
reg = <1>;
|
remote-endpoint = <&dp_altmode_mux>;
|
};
|
};
|
};
|
|
&usbdrd_dwc3_0 {
|
usb-role-switch;
|
port {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
dwc3_0_role_switch: endpoint@0 {
|
reg = <0>;
|
remote-endpoint = <&usbc0_role_sw>;
|
};
|
};
|
};
|
|
&usbhost3_0 {
|
status = "okay";
|
};
|
|
&usbhost_dwc3_0 {
|
dr_mode = "host";
|
status = "okay";
|
};
|
|
&vdd_log_s0 {
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <750000>;
|
};
|
};
|
|
&vcc_1v8_s0 {
|
/delete-property/ regulator-state-mem;
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <1800000>;
|
};
|
};
|
|
&vcc_3v3_s0 {
|
/delete-property/ regulator-state-mem;
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <3300000>;
|
};
|
};
|
