// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
/*
|
* Copyright (c) 2023 Rockchip Electronics Co., Ltd.
|
* Copyright (c) 2023 Rockchip rk3588-evb7-v11, Lhd.
|
*/
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
#include <dt-bindings/leds/common.h>
|
#include <dt-bindings/pwm/pwm.h>
|
#include <dt-bindings/pinctrl/rockchip.h>
|
#include <dt-bindings/input/rk-input.h>
|
#include <dt-bindings/display/drm_mipi_dsi.h>
|
#include <dt-bindings/display/rockchip_vop.h>
|
#include <dt-bindings/sensor-dev.h>
|
#include "dt-bindings/usb/pd.h"
|
#include "rk3588.dtsi"
|
#include "rk3588-rk806-single.dtsi"
|
#include "rk3588-linux.dtsi"
|
|
/ {
|
model = "ArmSom RK3588 sige7 Board";
|
compatible = "rockchip,rk3588-armsom-sige7", "rockchip,rk3588";
|
/delete-node/ chosen;
|
|
vcc12v_dcin: vcc12v-dcin {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc12v_dcin";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <12000000>;
|
regulator-max-microvolt = <12000000>;
|
};
|
|
vcc5v0_sys: vcc5v0-sys {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_sys";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
vin-supply = <&vcc12v_dcin>;
|
};
|
|
vcc5v0_usbdcin: vcc5v0-usbdcin {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_usbdcin";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
vin-supply = <&vcc12v_dcin>;
|
};
|
|
vcc5v0_usb: vcc5v0-usb {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_usb";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
vin-supply = <&vcc5v0_usbdcin>;
|
};
|
|
fan: pwm-fan {
|
compatible = "pwm-fan";
|
#cooling-cells = <2>;
|
pwms = <&pwm1 0 50000 0>;
|
cooling-levels = <0 50 100 150 200 255>;
|
rockchip,temp-trips = <
|
50000 1
|
55000 2
|
60000 3
|
65000 4
|
70000 5
|
>;
|
};
|
|
hdmi0_sound: hdmi0-sound {
|
status = "disabled";
|
compatible = "rockchip,hdmi";
|
rockchip,mclk-fs = <128>;
|
rockchip,card-name = "rockchip-hdmi0";
|
rockchip,cpu = <&i2s5_8ch>;
|
rockchip,codec = <&hdmi0>;
|
rockchip,jack-det;
|
};
|
|
dp0_sound: dp0-sound {
|
status = "disabled";
|
compatible = "rockchip,hdmi";
|
rockchip,card-name= "rockchip-dp0";
|
rockchip,mclk-fs = <512>;
|
rockchip,cpu = <&spdif_tx2>;
|
rockchip,codec = <&dp0 1>;
|
rockchip,jack-det;
|
};
|
|
leds: leds {
|
compatible = "gpio-leds";
|
work_led: work {
|
label = "red";
|
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
|
linux,default-trigger = "default-off";
|
default-state = "off";
|
};
|
|
active_led: active {
|
label = "green";
|
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
linux,default-trigger = "default-off";
|
default-state = "on";
|
};
|
};
|
|
es8316_sound: es8316-sound {
|
status = "okay";
|
compatible = "simple-audio-card";
|
simple-audio-card,format = "i2s";
|
simple-audio-card,mclk-fs = <256>;
|
simple-audio-card,name = "rockchip-es8316";
|
simple-audio-card,dai-link@0 {
|
format = "i2s";
|
cpu {
|
sound-dai = <&i2s0_8ch>;
|
};
|
codec {
|
sound-dai = <&es8316>;
|
};
|
};
|
};
|
|
pcie30_avdd0v75: pcie30-avdd0v75 {
|
compatible = "regulator-fixed";
|
regulator-name = "pcie30_avdd0v75";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <750000>;
|
regulator-max-microvolt = <750000>;
|
vin-supply = <&avdd_0v75_s0>;
|
};
|
|
pcie30_avdd1v8: pcie30-avdd1v8 {
|
compatible = "regulator-fixed";
|
regulator-name = "pcie30_avdd1v8";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
vin-supply = <&avcc_1v8_s0>;
|
};
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc_1v1_nldo_s3";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <1100000>;
|
regulator-max-microvolt = <1100000>;
|
vin-supply = <&vcc5v0_sys>;
|
};
|
|
vbus5v0_typec: vbus5v0-typec {
|
compatible = "regulator-fixed";
|
regulator-name = "vbus5v0_typec";
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
enable-active-high;
|
gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc5v0_sys>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&typec5v_pwren>;
|
};
|
|
vcc3v3_pcie30: vcc3v3-pcie30 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3_pcie30";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
enable-active-high;
|
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
startup-delay-us = <5000>;
|
vin-supply = <&vcc5v0_sys>;
|
};
|
|
vcc5v0_host: vcc5v0-host {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_host";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
enable-active-high;
|
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc5v0_sys >;
|
pinctrl-names = "default";
|
pinctrl-0 = <&vcc5v0_host_en>;
|
};
|
|
wireless_bluetooth: wireless-bluetooth {
|
compatible = "bluetooth-platdata";
|
clocks = <&hym8563>;
|
clock-names = "ext_clock";
|
uart_rts_gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default", "rts_gpio";
|
pinctrl-0 = <&uart6m1_rtsn>;
|
pinctrl-1 = <&uart6_gpios>;
|
BT,reset_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
|
wireless_wlan: wireless-wlan {
|
compatible = "wlan-platdata";
|
wifi_chip_type = "ap6275p";
|
pinctrl-names = "default";
|
pinctrl-0 = <&wifi_host_wake_irq>,<&wifi_poweren_gpio>;
|
WIFI,host_wake_irq = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
|
WIFI,poweren_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
};
|
|
&av1d_mmu {
|
status = "okay";
|
};
|
|
&avsd {
|
status = "okay";
|
};
|
|
&cpu_l0 {
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
};
|
|
&cpu_b0 {
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
mem-supply = <&vdd_cpu_big0_mem_s0>;
|
};
|
|
&cpu_b2 {
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
mem-supply = <&vdd_cpu_big1_mem_s0>;
|
};
|
|
|
&gpu {
|
mali-supply = <&vdd_gpu_s0>;
|
mem-supply = <&vdd_gpu_mem_s0>;
|
status = "okay";
|
};
|
|
&i2s0_8ch {
|
status = "okay";
|
pinctrl-0 = <&i2s0_lrck
|
&i2s0_sclk
|
&i2s0_sdi0
|
&i2s0_sdo0>;
|
};
|
|
&i2s2_2ch {
|
pinctrl-0 = <&i2s2m1_lrck &i2s2m1_sclk &i2s2m1_sdi &i2s2m1_sdo>;
|
rockchip,bclk-fs = <32>;
|
status = "disabled";
|
};
|
|
&iep {
|
status = "okay";
|
};
|
|
&iep_mmu {
|
status = "okay";
|
};
|
|
&jpegd {
|
status = "okay";
|
};
|
|
&jpegd_mmu {
|
status = "okay";
|
};
|
|
&jpege_ccu {
|
status = "okay";
|
};
|
|
&jpege0 {
|
status = "okay";
|
};
|
|
&jpege0_mmu {
|
status = "okay";
|
};
|
|
&jpege1 {
|
status = "okay";
|
};
|
|
&jpege1_mmu {
|
status = "okay";
|
};
|
|
&jpege2 {
|
status = "okay";
|
};
|
|
&jpege2_mmu {
|
status = "okay";
|
};
|
|
&jpege3 {
|
status = "okay";
|
};
|
|
&jpege3_mmu {
|
status = "okay";
|
};
|
|
&mpp_srv {
|
status = "okay";
|
};
|
|
&rga3_core0 {
|
status = "okay";
|
};
|
|
&rga3_0_mmu {
|
status = "okay";
|
};
|
|
&rga3_core1 {
|
status = "okay";
|
};
|
|
&rga3_1_mmu {
|
status = "okay";
|
};
|
|
&rga2 {
|
status = "okay";
|
};
|
|
&rknpu {
|
rknpu-supply = <&vdd_npu_s0>;
|
mem-supply = <&vdd_npu_mem_s0>;
|
status = "okay";
|
};
|
|
&rknpu_mmu {
|
status = "okay";
|
};
|
|
&rkvdec_ccu {
|
status = "okay";
|
};
|
|
&rkvdec0 {
|
status = "okay";
|
};
|
|
&rkvdec0_mmu {
|
status = "okay";
|
};
|
|
&rkvdec1 {
|
status = "okay";
|
};
|
|
&rkvdec1_mmu {
|
status = "okay";
|
};
|
|
&rkvenc_ccu {
|
status = "okay";
|
};
|
|
&rkvenc0 {
|
venc-supply = <&vdd_vdenc_s0>;
|
mem-supply = <&vdd_vdenc_mem_s0>;
|
status = "okay";
|
};
|
|
&rkvenc0_mmu {
|
status = "okay";
|
};
|
|
&rkvenc1 {
|
venc-supply = <&vdd_vdenc_s0>;
|
mem-supply = <&vdd_vdenc_mem_s0>;
|
status = "okay";
|
};
|
|
&rkvenc1_mmu {
|
status = "okay";
|
};
|
|
&rockchip_suspend {
|
status = "okay";
|
rockchip,sleep-debug-en = <1>;
|
};
|
|
&saradc {
|
status = "okay";
|
vref-supply = <&vcc_1v8_s0>;
|
};
|
|
&sdhci {
|
bus-width = <8>;
|
no-sdio;
|
no-sd;
|
non-removable;
|
max-frequency = <200000000>;
|
mmc-hs400-1_8v;
|
mmc-hs400-enhanced-strobe;
|
full-pwr-cycle-in-suspend;
|
status = "okay";
|
};
|
|
&sdmmc {
|
max-frequency = <150000000>;
|
no-sdio;
|
no-mmc;
|
bus-width = <4>;
|
cap-mmc-highspeed;
|
cap-sd-highspeed;
|
disable-wp;
|
sd-uhs-sdr104;
|
vqmmc-supply = <&vccio_sd_s0>;
|
status = "disabled";
|
};
|
|
&tsadc {
|
status = "okay";
|
};
|
|
&u2phy0 {
|
status = "okay";
|
};
|
|
&u2phy1 {
|
status = "okay";
|
};
|
|
&u2phy2 {
|
status = "okay";
|
};
|
|
&u2phy3 {
|
status = "okay";
|
};
|
|
&u2phy0_otg {
|
status = "okay";
|
};
|
|
&u2phy1_otg {
|
status = "okay";
|
};
|
|
&u2phy2_host {
|
status = "okay";
|
};
|
|
&u2phy3_host {
|
status = "okay";
|
};
|
|
&usb_host0_ehci {
|
status = "okay";
|
};
|
|
&usb_host0_ohci {
|
status = "okay";
|
};
|
|
&usb_host1_ehci {
|
status = "okay";
|
};
|
|
&usb_host1_ohci {
|
status = "okay";
|
};
|
|
&usbdp_phy0_dp {
|
status = "okay";
|
};
|
|
&usbdp_phy0_u3 {
|
status = "okay";
|
};
|
|
&usbdp_phy1 {
|
status = "okay";
|
};
|
|
&usbdp_phy1_dp {
|
status = "disabled";
|
};
|
|
&usbdp_phy1_u3 {
|
status = "okay";
|
};
|
|
&usbdrd3_0 {
|
status = "okay";
|
};
|
|
&usbhost3_0 {
|
status = "okay";
|
};
|
|
&usbhost_dwc3_0 {
|
status = "okay";
|
};
|
|
&usbdrd3_1 {
|
status = "okay";
|
};
|
|
&usbdrd_dwc3_1 {
|
status = "okay";
|
};
|
|
&vdpu {
|
status = "okay";
|
};
|
|
&vdpu_mmu {
|
status = "okay";
|
};
|
|
&vepu {
|
status = "okay";
|
};
|
|
&vop {
|
status = "okay";
|
};
|
|
&vop_mmu {
|
status = "okay";
|
};
|
|
/* vp0 & vp1 splice for 8K output */
|
&vp0 {
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0 | 1 << ROCKCHIP_VOP2_ESMART0)>;
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART0>;
|
};
|
|
&vp1 {
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1)>;
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART1>;
|
};
|
|
&vp2 {
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER2 | 1 << ROCKCHIP_VOP2_ESMART2)>;
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART2>;
|
};
|
|
&vp3 {
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER3 | 1 << ROCKCHIP_VOP2_ESMART3)>;
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART3>;
|
};
|
|
&dp0 {
|
status = "okay";
|
};
|
&dp0_in_vp2 {
|
status = "okay";
|
};
|
|
&dp0_sound{
|
status = "okay";
|
};
|
|
&route_dp0 {
|
status = "okay";
|
connect = <&vp2_out_dp0>;
|
};
|
|
&spdif_tx2 {
|
status = "okay";
|
};
|
|
&hdmi0 {
|
status = "okay";
|
};
|
|
&hdmi0_in_vp0 {
|
status = "okay";
|
};
|
|
&hdmi0_sound {
|
status = "okay";
|
};
|
|
&hdptxphy_hdmi0 {
|
status = "okay";
|
};
|
|
&hdptxphy_hdmi1 {
|
status = "disabled";
|
};
|
|
&i2c0 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 {
|
compatible = "rockchip,rk8602";
|
reg = <0x42>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "rk860x-reg";
|
regulator-name = "vdd_cpu_big0_s0";
|
regulator-min-microvolt = <550000>;
|
regulator-max-microvolt = <1050000>;
|
regulator-ramp-delay = <2300>;
|
rockchip,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 {
|
compatible = "rockchip,rk8603";
|
reg = <0x43>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "rk860x-reg";
|
regulator-name = "vdd_cpu_big1_s0";
|
regulator-min-microvolt = <550000>;
|
regulator-max-microvolt = <1050000>;
|
regulator-ramp-delay = <2300>;
|
rockchip,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
};
|
|
&i2c1 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c1m2_xfer>;
|
|
vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 {
|
compatible = "rockchip,rk8602";
|
reg = <0x42>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "rk860x-reg";
|
regulator-name = "vdd_npu_s0";
|
regulator-min-microvolt = <550000>;
|
regulator-max-microvolt = <950000>;
|
regulator-ramp-delay = <2300>;
|
rockchip,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
};
|
|
&i2c3 {
|
status = "okay";
|
usbc1: fusb302@22 {
|
compatible = "fcs,fusb302";
|
reg = <0x22>;
|
interrupt-parent = <&gpio3>;
|
interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
|
int-n-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&usbc1_int>;
|
//vbus-supply = <&vcc12v_dcin>;
|
vbus-supply = <&vcc5v0_usbdcin>;
|
status = "okay";
|
usb_con1: connector {
|
compatible = "usb-c-connector";
|
label = "USB-C";
|
data-role = "dual";
|
power-role = "dual";
|
try-power-role = "sink";
|
op-sink-microwatt = <1000000>;
|
sink-pdos =
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
|
PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
|
source-pdos =
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
altmodes {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
altmode@0 {
|
reg = <0>;
|
svid = <0xff01>;
|
vdo = <0xffffffff>;
|
};
|
};
|
};
|
};
|
};
|
|
&i2c4 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c4m1_xfer>;
|
|
usbc0: fusb302@22 {
|
compatible = "fcs,fusb302";
|
reg = <0x22>;
|
interrupt-parent = <&gpio3>;
|
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
|
int-n-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&usbc0_int>;
|
//vbus-supply = <&vcc12v_dcin>;
|
vbus-supply = <&vbus5v0_typec>;
|
status = "okay";
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
usbc0_role_sw: endpoint@0 {
|
remote-endpoint = <&dwc3_0_role_switch>;
|
};
|
};
|
};
|
|
usb_con: connector {
|
compatible = "usb-c-connector";
|
label = "USB-C";
|
data-role = "dual";
|
power-role = "dual";
|
try-power-role = "sink";
|
op-sink-microwatt = <1000000>;
|
sink-pdos =
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
|
PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
|
source-pdos =
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
altmodes {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
altmode@0 {
|
reg = <0>;
|
svid = <0xff01>;
|
vdo = <0xffffffff>;
|
};
|
};
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
usbc0_orien_sw: endpoint {
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
};
|
};
|
|
port@1 {
|
reg = <1>;
|
dp_altmode_mux: endpoint {
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
};
|
};
|
};
|
};
|
};
|
};
|
|
&i2c5 {
|
status = "disabled";
|
};
|
|
&i2c6 {
|
status = "okay";
|
hym8563: hym8563@51 {
|
compatible = "haoyu,hym8563";
|
reg = <0x51>;
|
#clock-cells = <0>;
|
clock-frequency = <32768>;
|
clock-output-names = "hym8563";
|
pinctrl-names = "default";
|
pinctrl-0 = <&hym8563_int>;
|
interrupt-parent = <&gpio0>;
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
};
|
};
|
|
&i2c7 {
|
status = "okay";
|
i2c-scl-rising-time-ns = <265>;
|
i2c-scl-falling-time-ns = <26>;
|
clock-frequency = <400000>;
|
|
es8316: es8316@11 {
|
status = "okay";
|
#sound-dai-cells = <0>;
|
compatible = "everest,es8316";
|
reg = <0x11>;
|
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
clock-names = "mclk";
|
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
assigned-clock-rates = <12288000>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2s0_mclk>;
|
};
|
};
|
|
|
&i2s5_8ch {
|
status = "okay";
|
};
|
|
&i2s6_8ch {
|
status = "okay";
|
};
|
|
&i2s7_8ch {
|
status = "okay";
|
};
|
|
&mdio1 {
|
rgmii_phy: phy@1 {
|
compatible = "ethernet-phy-ieee802.3-c22";
|
reg = <0x1>;
|
};
|
};
|
|
&mipi_dcphy0 {
|
status = "okay";
|
};
|
|
&mipi_dcphy1 {
|
status = "disabled";
|
};
|
|
|
|
|
&combphy0_ps {
|
status = "okay";
|
};
|
|
&combphy1_ps {
|
status = "okay";
|
};
|
|
&combphy2_psu {
|
status = "okay";
|
};
|
|
&pcie2x1l0 {
|
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
rockchip,init-delay-ms = <100>;
|
status = "okay";
|
};
|
|
&pcie2x1l1 {
|
reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
|
&pcie2x1l2 {
|
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
rockchip,init-delay-ms = <100>;
|
status = "okay";
|
|
};
|
|
&pcie30phy {
|
rockchip,pcie30-phymode = <PHY_MODE_PCIE_AGGREGATION>;
|
status = "okay";
|
};
|
|
&pcie3x4 {
|
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&pcie30x4_clkreqn_m1>;
|
status = "okay";
|
};
|
|
&pinctrl {
|
cam {
|
mipicsi0_pwr: mipicsi0-pwr {
|
rockchip,pins =
|
/* camera power en */
|
<1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
mipicsi1_pwr: mipicsi1-pwr {
|
rockchip,pins =
|
/* camera power en */
|
<1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
mipidcphy0_pwr: mipidcphy0-pwr {
|
rockchip,pins =
|
/* camera power en */
|
<2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
hym8563 {
|
hym8563_int: hym8563-int {
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
lcd {
|
lcd_rst_gpio: lcd-rst-gpio {
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
sdio-pwrseq {
|
wifi_enable_h: wifi-enable-h {
|
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
sdmmc {
|
sd_s0_pwr: sd-s0-pwr {
|
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
touch {
|
touch_gpio: touch-gpio {
|
rockchip,pins =
|
<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>,
|
<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
usb {
|
vcc5v0_host_en: vcc5v0-host-en {
|
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
usb-typec {
|
usbc0_int: usbc0-int {
|
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
|
usbc1_int: usbc1-int {
|
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
|
typec5v_pwren: typec5v-pwren {
|
rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
pcie30x4 {
|
pcie30x4_clkreqn_m1: pcie30x4-clkreqn-m1 {
|
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
|
};
|
};
|
|
wireless-bluetooth {
|
uart6_gpios: uart6-gpios {
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
wireless-wlan {
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
};
|
wifi_poweren_gpio: wifi-poweren-gpio {
|
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
};
|
|
&pwm1 {
|
status = "okay";
|
};
|
|
&pwm3 {
|
pinctrl-0 = <&pwm3m1_pins>;
|
status = "disabled";
|
};
|
|
&route_dsi0 {
|
status = "disabled";
|
connect = <&vp3_out_dsi0>;
|
};
|
|
&route_dsi1 {
|
status = "disabled";
|
connect = <&vp3_out_dsi1>;
|
};
|
|
&route_hdmi0 {
|
status = "okay";
|
};
|
|
|
&leds {
|
status = "okay";
|
};
|
|
|
&sdhci {
|
bus-width = <8>;
|
no-sdio;
|
no-sd;
|
non-removable;
|
max-frequency = <200000000>;
|
mmc-hs400-1_8v;
|
status = "okay";
|
};
|
|
&sdmmc {
|
max-frequency = <200000000>;
|
no-sdio;
|
no-mmc;
|
bus-width = <4>;
|
cap-mmc-highspeed;
|
cap-sd-highspeed;
|
disable-wp;
|
sd-uhs-sdr104;
|
vmmc-supply = <&vcc_3v3_s3>;
|
vqmmc-supply = <&vccio_sd_s0>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
|
status = "okay";
|
};
|
|
&uart6 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn>;
|
};
|
|
|
&u2phy0 {
|
status = "okay";
|
};
|
|
&u2phy0_otg {
|
rockchip,typec-vbus-det;
|
status = "okay";
|
};
|
|
&usbdp_phy0 {
|
status = "okay";
|
orientation-switch;
|
svid = <0xff01>;
|
sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
port {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
reg = <0>;
|
remote-endpoint = <&usbc0_orien_sw>;
|
};
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
reg = <1>;
|
remote-endpoint = <&dp_altmode_mux>;
|
};
|
};
|
};
|
|
&usbdrd_dwc3_0 {
|
status = "okay";
|
dr_mode = "otg";
|
usb-role-switch;
|
port {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
dwc3_0_role_switch: endpoint@0 {
|
reg = <0>;
|
remote-endpoint = <&usbc0_role_sw>;
|
};
|
};
|
};
|
