/*
|
* Copyright (C) 2020, Broadcom.
|
*
|
* Unless you and Broadcom execute a separate written software license
|
* agreement governing use of this software, this software is licensed to you
|
* under the terms of the GNU General Public License version 2 (the "GPL"),
|
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
|
* following added to such license:
|
*
|
* As a special exception, the copyright holders of this software give you
|
* permission to link this software with independent modules, and to copy and
|
* distribute the resulting executable under terms of your choice, provided that
|
* you also meet, for each linked independent module, the terms and conditions of
|
* the license of that module. An independent module is a module which is not
|
* derived from this software. The special exception does not apply to any
|
* modifications of the software.
|
*
|
*
|
* <<Broadcom-WL-IPTag/Dual:>>
|
*
|
*/
|
|
/** WL flow control for PROP_TXSTATUS. Related to host AMPDU reordering. */
|
|
#ifndef __wlfc_proto_definitions_h__
|
#define __wlfc_proto_definitions_h__
|
|
/* Use TLV to convey WLFC information.
|
---------------------------------------------------------------------------
|
| Type | Len | value | Description
|
---------------------------------------------------------------------------
|
| 1 | 1 | (handle) | MAC OPEN
|
---------------------------------------------------------------------------
|
| 2 | 1 | (handle) | MAC CLOSE
|
---------------------------------------------------------------------------
|
| 3 | 2 | (count, handle, prec_bmp)| Set the credit depth for a MAC dstn
|
---------------------------------------------------------------------------
|
| 4 | 4+ | see pkttag comments | TXSTATUS
|
| | 12 | TX status & timestamps | Present only when pkt timestamp is enabled
|
---------------------------------------------------------------------------
|
| 5 | 4 | see pkttag comments | PKKTTAG [host->firmware]
|
---------------------------------------------------------------------------
|
| 6 | 8 | (handle, ifid, MAC) | MAC ADD
|
---------------------------------------------------------------------------
|
| 7 | 8 | (handle, ifid, MAC) | MAC DEL
|
---------------------------------------------------------------------------
|
| 8 | 1 | (rssi) | RSSI - RSSI value for the packet.
|
---------------------------------------------------------------------------
|
| 9 | 1 | (interface ID) | Interface OPEN
|
---------------------------------------------------------------------------
|
| 10 | 1 | (interface ID) | Interface CLOSE
|
---------------------------------------------------------------------------
|
| 11 | 8 | fifo credit returns map | FIFO credits back to the host
|
| | | |
|
| | | | --------------------------------------
|
| | | | | ac0 | ac1 | ac2 | ac3 | bcmc | atim |
|
| | | | --------------------------------------
|
| | | |
|
---------------------------------------------------------------------------
|
| 12 | 2 | MAC handle, | Host provides a bitmap of pending
|
| | | AC[0-3] traffic bitmap | unicast traffic for MAC-handle dstn.
|
| | | | [host->firmware]
|
---------------------------------------------------------------------------
|
| 13 | 3 | (count, handle, prec_bmp)| One time request for packet to a specific
|
| | | | MAC destination.
|
---------------------------------------------------------------------------
|
| 15 | 12 | (pkttag, timestamps) | Send TX timestamp at reception from host
|
---------------------------------------------------------------------------
|
| 16 | 12 | (pkttag, timestamps) | Send WLAN RX timestamp along with RX frame
|
---------------------------------------------------------------------------
|
| 255 | N/A | N/A | FILLER - This is a special type
|
| | | | that has no length or value.
|
| | | | Typically used for padding.
|
---------------------------------------------------------------------------
|
*/
|
|
typedef enum {
|
WLFC_CTL_TYPE_MAC_OPEN = 1,
|
WLFC_CTL_TYPE_MAC_CLOSE = 2,
|
WLFC_CTL_TYPE_MAC_REQUEST_CREDIT = 3,
|
WLFC_CTL_TYPE_TXSTATUS = 4,
|
WLFC_CTL_TYPE_PKTTAG = 5, /** host<->dongle */
|
|
WLFC_CTL_TYPE_MACDESC_ADD = 6,
|
WLFC_CTL_TYPE_MACDESC_DEL = 7,
|
WLFC_CTL_TYPE_RSSI = 8,
|
|
WLFC_CTL_TYPE_INTERFACE_OPEN = 9,
|
WLFC_CTL_TYPE_INTERFACE_CLOSE = 10,
|
|
WLFC_CTL_TYPE_FIFO_CREDITBACK = 11,
|
|
WLFC_CTL_TYPE_PENDING_TRAFFIC_BMP = 12, /** host->dongle */
|
WLFC_CTL_TYPE_MAC_REQUEST_PACKET = 13,
|
WLFC_CTL_TYPE_HOST_REORDER_RXPKTS = 14,
|
|
WLFC_CTL_TYPE_TX_ENTRY_STAMP = 15,
|
WLFC_CTL_TYPE_RX_STAMP = 16,
|
|
WLFC_CTL_TYPE_UPD_FLR_FETCH = 17, /* PCIE_FLOWCTL: Update Flowring Fetch */
|
|
WLFC_CTL_TYPE_TRANS_ID = 18,
|
WLFC_CTL_TYPE_COMP_TXSTATUS = 19,
|
|
WLFC_CTL_TYPE_TID_OPEN = 20, /* open flowring/s with tid */
|
WLFC_CTL_TYPE_TID_CLOSE = 21, /* close flowring/s with tid */
|
WLFC_CTL_TYPE_UPD_FLR_WEIGHT = 22, /* WLATF_DONGLE */
|
WLFC_CTL_TYPE_ENAB_FFSCH = 23, /* WLATF_DONGLE */
|
|
WLFC_CTL_TYPE_UPDATE_FLAGS = 24, /* clear the flags set in flowring */
|
WLFC_CTL_TYPE_CLEAR_SUPPR = 25, /* free the supression info in the flowring */
|
|
WLFC_CTL_TYPE_FLOWID_OPEN = 26, /* open flowring with flowid */
|
WLFC_CTL_TYPE_FLOWID_CLOSE = 27, /* close flowring with flowid */
|
|
WLFC_CTL_TYPE_PENDING_TX_PKTS = 28, /* Get the outstandinding packets in host
|
* flowring for the given interface.
|
*/
|
WLFC_CTL_TYPE_UPD_SCB_RATESEL_CHANGE = 29, /* Upd flow's max rate dynamically */
|
WLFC_CTL_TYPE_AMSDU_STATE = 30, /* Upd flow's AMSDU state(Enabled/Disabled) */
|
WLFC_CTL_TYPE_APP_STATE = 31, /* Upd flow's APP state, enable/disable APP */
|
WLFC_CTL_TYPE_HP2P_EXT_TXSTATUS = 32, /* Hp2p extended tx status */
|
WLFC_CTL_TYPE_HP2P_ACTIVE_STATE = 33, /* Get status of HP2P ring active or not */
|
WLFC_CTL_TYPE_HP2P_QUERY_LIFETIME = 34, /* Query lifetime for last unacked */
|
WLFC_CTL_TYPE_FILLER = 255
|
} wlfc_ctl_type_t;
|
|
#define WLFC_CTL_VALUE_LEN_FLOWID 2u /* flowid legth in TLV */
|
|
#define WLFC_CTL_VALUE_LEN_MACDESC 8u /** handle, interface, MAC */
|
|
#define WLFC_CTL_VALUE_LEN_MAC 1u /** MAC-handle */
|
#define WLFC_CTL_VALUE_LEN_RSSI 1u
|
|
#define WLFC_CTL_VALUE_LEN_INTERFACE 1u
|
#define WLFC_CTL_VALUE_LEN_PENDING_TRAFFIC_BMP 2u
|
|
#define WLFC_CTL_VALUE_LEN_TXSTATUS 4u
|
#define WLFC_CTL_VALUE_LEN_PKTTAG 4u
|
#define WLFC_CTL_VALUE_LEN_TIMESTAMP 12u /** 4-byte rate info + 2 TSF */
|
|
#define WLFC_CTL_VALUE_LEN_SEQ 2u
|
#define WLFC_CTL_VALUE_LEN_TID 3u /* interface index, TID */
|
|
#define WLFC_CTL_EXT_TXSTATUS_PAYLOAD_LEN 8u /* Payload legnth of extention tx status */
|
|
/* Reset the flags set for the corresponding flowring of the SCB which is de-inited */
|
/* FLOW_RING_FLAG_LAST_TIM | FLOW_RING_FLAG_INFORM_PKTPEND | FLOW_RING_FLAG_PKT_REQ */
|
#define WLFC_RESET_ALL_FLAGS 0
|
#define WLFC_CTL_VALUE_LEN_FLAGS 7 /** flags, MAC */
|
|
/* free the data stored to be used for suppressed packets in future */
|
#define WLFC_CTL_VALUE_LEN_SUPR 8 /** ifindex, tid, MAC */
|
|
#define WLFC_CTL_VALUE_LEN_SCB_RATESEL_CHANGE 7 /* ifindex, MAC */
|
/* enough space to host all 4 ACs, bc/mc and atim fifo credit */
|
#define WLFC_CTL_VALUE_LEN_FIFO_CREDITBACK 6
|
|
#define WLFC_CTL_VALUE_LEN_REQUEST_CREDIT 3 /* credit, MAC-handle, prec_bitmap */
|
#define WLFC_CTL_VALUE_LEN_REQUEST_PACKET 3 /* credit, MAC-handle, prec_bitmap */
|
|
/*
|
WLFC packet identifier: b[31:0] (WLFC_CTL_TYPE_PKTTAG)
|
|
Generation : b[31] => generation number for this packet [host->fw]
|
OR, current generation number [fw->host]
|
Flags : b[30:27] => command, status flags
|
FIFO-AC : b[26:24] => AC-FIFO id
|
|
h-slot : b[23:8] => hanger-slot
|
freerun : b[7:0] => A free running counter?
|
|
As far as the firmware is concerned, host generated b[23:0] should be just
|
reflected back on txstatus.
|
*/
|
|
#ifndef WLFC_PKTFLAG_COMPAT
|
#define WLFC_PKTFLAG_PKTFROMHOST 0x01
|
#define WLFC_PKTFLAG_PKT_REQUESTED 0x02
|
#define WLFC_PKTFLAG_PKT_SENDTOHOST 0x04
|
#define WLFC_PKTFLAG_PKT_FLUSHED 0x08
|
#else
|
#define WLFC_PKTFLAG_PKTFROMHOST_MASK 0x01
|
#define WLFC_PKTFLAG_PKT_REQUESTED_MASK 0x02
|
#define WLFC_PKTFLAG_PKT_SENDTOHOST_MASK 0x04
|
#define WLFC_PKTFLAG_PKT_FLUSHED_MASK 0x08
|
#endif /* WLFC_PKTFLAG_COMPAT */
|
|
#define WL_TXSTATUS_STATUS_MASK 0xff /* allow 8 bits */
|
#define WL_TXSTATUS_STATUS_SHIFT 24
|
|
#define WL_TXSTATUS_SET_STATUS(x, status) ((x) = \
|
((x) & ~(WL_TXSTATUS_STATUS_MASK << WL_TXSTATUS_STATUS_SHIFT)) | \
|
(((status) & WL_TXSTATUS_STATUS_MASK) << WL_TXSTATUS_STATUS_SHIFT))
|
#define WL_TXSTATUS_GET_STATUS(x) (((x) >> WL_TXSTATUS_STATUS_SHIFT) & \
|
WL_TXSTATUS_STATUS_MASK)
|
|
/**
|
* Bit 31 of the 32-bit packet tag is defined as 'generation ID'. It is set by the host to the
|
* "current" generation, and by the firmware to the "expected" generation, toggling on suppress. The
|
* firmware accepts a packet when the generation matches; on reset (startup) both "current" and
|
* "expected" are set to 0.
|
*/
|
#define WL_TXSTATUS_GENERATION_MASK 1 /* allow 1 bit */
|
#define WL_TXSTATUS_GENERATION_SHIFT 31
|
|
#define WL_TXSTATUS_SET_GENERATION(x, gen) ((x) = \
|
((x) & ~(WL_TXSTATUS_GENERATION_MASK << WL_TXSTATUS_GENERATION_SHIFT)) | \
|
(((gen) & WL_TXSTATUS_GENERATION_MASK) << WL_TXSTATUS_GENERATION_SHIFT))
|
|
#define WL_TXSTATUS_GET_GENERATION(x) (((x) >> WL_TXSTATUS_GENERATION_SHIFT) & \
|
WL_TXSTATUS_GENERATION_MASK)
|
|
#define WL_TXSTATUS_FLAGS_MASK 0xf /* allow 4 bits only */
|
#define WL_TXSTATUS_FLAGS_SHIFT 27
|
|
#define WL_TXSTATUS_SET_FLAGS(x, flags) ((x) = \
|
((x) & ~(WL_TXSTATUS_FLAGS_MASK << WL_TXSTATUS_FLAGS_SHIFT)) | \
|
(((flags) & WL_TXSTATUS_FLAGS_MASK) << WL_TXSTATUS_FLAGS_SHIFT))
|
#define WL_TXSTATUS_GET_FLAGS(x) (((x) >> WL_TXSTATUS_FLAGS_SHIFT) & \
|
WL_TXSTATUS_FLAGS_MASK)
|
#define WL_TXSTATUS_CLEAR_FLAGS(x, flags) ((x) = \
|
((x) & ~(((flags) & WL_TXSTATUS_FLAGS_MASK) << WL_TXSTATUS_FLAGS_SHIFT)))
|
|
#define WL_TXSTATUS_FIFO_MASK 0x7 /* allow 3 bits for FIFO ID */
|
#define WL_TXSTATUS_FIFO_SHIFT 24
|
|
#define WL_TXSTATUS_SET_FIFO(x, flags) ((x) = \
|
((x) & ~(WL_TXSTATUS_FIFO_MASK << WL_TXSTATUS_FIFO_SHIFT)) | \
|
(((flags) & WL_TXSTATUS_FIFO_MASK) << WL_TXSTATUS_FIFO_SHIFT))
|
#define WL_TXSTATUS_GET_FIFO(x) (((x) >> WL_TXSTATUS_FIFO_SHIFT) & WL_TXSTATUS_FIFO_MASK)
|
|
#define WL_TXSTATUS_PKTID_MASK 0xffffff /* allow 24 bits */
|
#define WL_TXSTATUS_SET_PKTID(x, num) ((x) = \
|
((x) & ~WL_TXSTATUS_PKTID_MASK) | (num))
|
#define WL_TXSTATUS_GET_PKTID(x) ((x) & WL_TXSTATUS_PKTID_MASK)
|
|
#define WL_TXSTATUS_HSLOT_MASK 0xffff /* allow 16 bits */
|
#define WL_TXSTATUS_HSLOT_SHIFT 8
|
|
#define WL_TXSTATUS_SET_HSLOT(x, hslot) ((x) = \
|
((x) & ~(WL_TXSTATUS_HSLOT_MASK << WL_TXSTATUS_HSLOT_SHIFT)) | \
|
(((hslot) & WL_TXSTATUS_HSLOT_MASK) << WL_TXSTATUS_HSLOT_SHIFT))
|
#define WL_TXSTATUS_GET_HSLOT(x) (((x) >> WL_TXSTATUS_HSLOT_SHIFT)& \
|
WL_TXSTATUS_HSLOT_MASK)
|
|
#define WL_TXSTATUS_FREERUNCTR_MASK 0xff /* allow 8 bits */
|
|
#define WL_TXSTATUS_SET_FREERUNCTR(x, ctr) ((x) = \
|
((x) & ~(WL_TXSTATUS_FREERUNCTR_MASK)) | \
|
((ctr) & WL_TXSTATUS_FREERUNCTR_MASK))
|
#define WL_TXSTATUS_GET_FREERUNCTR(x) ((x)& WL_TXSTATUS_FREERUNCTR_MASK)
|
|
/* packet prio phase bit updated */
|
#define WL_SEQ_PKTPRIO_PHASE_MASK 0x1
|
#define WL_SEQ_PKTPRIO_PHASE_SHIFT 15
|
#define WL_SEQ_SET_PKTPRIO_PHASE(x, val) ((x) = \
|
((x) & ~(WL_SEQ_PKTPRIO_PHASE_MASK << WL_SEQ_PKTPRIO_PHASE_SHIFT)) | \
|
(((val) & WL_SEQ_PKTPRIO_PHASE_MASK) << WL_SEQ_PKTPRIO_PHASE_SHIFT))
|
#define WL_SEQ_PKTPRIO_PHASE(x) (((x) >> WL_SEQ_PKTPRIO_PHASE_SHIFT) & \
|
WL_SEQ_PKTPRIO_PHASE_MASK)
|
|
/* AMSDU part of d11 seq number */
|
#define WL_SEQ_AMSDU_MASK 0x1 /* allow 1 bit */
|
#define WL_SEQ_AMSDU_SHIFT 14
|
#define WL_SEQ_SET_AMSDU(x, val) ((x) = \
|
((x) & ~(WL_SEQ_AMSDU_MASK << WL_SEQ_AMSDU_SHIFT)) | \
|
(((val) & WL_SEQ_AMSDU_MASK) << WL_SEQ_AMSDU_SHIFT)) /**< sets a single AMSDU bit */
|
/** returns TRUE if ring item is AMSDU (seq = d11 seq nr) */
|
#define WL_SEQ_IS_AMSDU(x) (((x) >> WL_SEQ_AMSDU_SHIFT) & \
|
WL_SEQ_AMSDU_MASK)
|
|
/* indicates last_suppr_seq is valid */
|
#define WL_SEQ_VALIDSUPPR_MASK 0x1 /* allow 1 bit */
|
#define WL_SEQ_VALIDSUPPR_SHIFT 12
|
#define WL_SEQ_SET_VALIDSUPPR(x, val) ((x) = \
|
((x) & ~(WL_SEQ_VALIDSUPPR_MASK << WL_SEQ_VALIDSUPPR_SHIFT)) | \
|
(((val) & WL_SEQ_VALIDSUPPR_MASK) << WL_SEQ_VALIDSUPPR_SHIFT))
|
#define WL_SEQ_GET_VALIDSUPPR(x) (((x) >> WL_SEQ_VALIDSUPPR_SHIFT) & \
|
WL_SEQ_VALIDSUPPR_MASK)
|
|
#define WL_SEQ_FROMFW_MASK 0x1 /* allow 1 bit */
|
#define WL_SEQ_FROMFW_SHIFT 13
|
#define WL_SEQ_SET_FROMFW(x, val) ((x) = \
|
((x) & ~(WL_SEQ_FROMFW_MASK << WL_SEQ_FROMFW_SHIFT)) | \
|
(((val) & WL_SEQ_FROMFW_MASK) << WL_SEQ_FROMFW_SHIFT))
|
/** Set when firmware assigns D11 sequence number to packet */
|
#define SET_WL_HAS_ASSIGNED_SEQ(x) WL_SEQ_SET_FROMFW((x), 1)
|
|
/** returns TRUE if packet has been assigned a d11 seq number by the WL firmware layer */
|
#define GET_WL_HAS_ASSIGNED_SEQ(x) (((x) >> WL_SEQ_FROMFW_SHIFT) & WL_SEQ_FROMFW_MASK)
|
|
#ifdef WLFC_PKTFLAG_COMPAT
|
/* Helper macros for WLFC pktflags */
|
#define WLFC_PKTFLAG_PKTFROMHOST(p) \
|
(WL_TXSTATUS_GET_FLAGS(WLPKTTAG(p)->wl_hdr_information) & WLFC_PKTFLAG_PKTFROMHOST_MASK)
|
#define WLFC_PKTFLAG_PKT_REQUESTED(p) \
|
(WL_TXSTATUS_GET_FLAGS(WLPKTTAG(p)->wl_hdr_information) & WLFC_PKTFLAG_PKT_REQUESTED_MASK)
|
#define WLFC_PKTFLAG_PKT_SENDTOHOST(p) \
|
(WL_TXSTATUS_GET_FLAGS(WLPKTTAG(p)->wl_hdr_information) & WLFC_PKTFLAG_PKT_SENDTOHOST_MASK)
|
#define WLFC_PKTFLAG_PKT_FLUSHED(p) \
|
(WL_TXSTATUS_GET_FLAGS(WLPKTTAG(p)->wl_hdr_information) & WLFC_PKTFLAG_PKT_FLUSHED_MASK)
|
#endif /* WLFC_PKTFLAG_COMPAT */
|
|
/**
|
* Proptxstatus related.
|
*
|
* When a packet is suppressed by WL or the D11 core, the packet has to be retried. Assigning
|
* a new d11 sequence number for the packet when retrying would cause the peer to be unable to
|
* reorder the packets within an AMPDU. So, suppressed packet from bus layer (DHD for SDIO and
|
* pciedev for PCIE) is re-using d11 seq number, so FW should not assign a new one.
|
*/
|
#define WL_SEQ_FROMDRV_MASK 0x1 /* allow 1 bit */
|
#define WL_SEQ_FROMDRV_SHIFT 12
|
|
/**
|
* Proptxstatus, host or fw PCIe layer requests WL layer to reuse d11 seq no. Bit is reset by WL
|
* subsystem when it reuses the seq number.
|
*/
|
#define WL_SEQ_SET_REUSE(x, val) ((x) = \
|
((x) & ~(WL_SEQ_FROMDRV_MASK << WL_SEQ_FROMDRV_SHIFT)) | \
|
(((val) & WL_SEQ_FROMDRV_MASK) << WL_SEQ_FROMDRV_SHIFT))
|
#define SET_WL_TO_REUSE_SEQ(x) WL_SEQ_SET_REUSE((x), 1)
|
#define RESET_WL_TO_REUSE_SEQ(x) WL_SEQ_SET_REUSE((x), 0)
|
|
/** Proptxstatus, related to reuse of d11 seq numbers when retransmitting */
|
#define IS_WL_TO_REUSE_SEQ(x) (((x) >> WL_SEQ_FROMDRV_SHIFT) & \
|
WL_SEQ_FROMDRV_MASK)
|
|
#define WL_SEQ_NUM_MASK 0xfff /* allow 12 bit */
|
#define WL_SEQ_NUM_SHIFT 0
|
/** Proptxstatus, sets d11seq no in pkt tag, related to reuse of d11seq no when retransmitting */
|
#define WL_SEQ_SET_NUM(x, val) ((x) = \
|
((x) & ~(WL_SEQ_NUM_MASK << WL_SEQ_NUM_SHIFT)) | \
|
(((val) & WL_SEQ_NUM_MASK) << WL_SEQ_NUM_SHIFT))
|
/** Proptxstatus, gets d11seq no from pkt tag, related to reuse of d11seq no when retransmitting */
|
#define WL_SEQ_GET_NUM(x) (((x) >> WL_SEQ_NUM_SHIFT) & \
|
WL_SEQ_NUM_MASK)
|
|
#define WL_SEQ_AMSDU_SUPPR_MASK ((WL_SEQ_FROMDRV_MASK << WL_SEQ_FROMDRV_SHIFT) | \
|
(WL_SEQ_AMSDU_MASK << WL_SEQ_AMSDU_SHIFT) | \
|
(WL_SEQ_NUM_MASK << WL_SEQ_NUM_SHIFT))
|
|
/* 32 STA should be enough??, 6 bits; Must be power of 2 */
|
#define WLFC_MAC_DESC_TABLE_SIZE 32
|
#define WLFC_MAX_IFNUM 16
|
#define WLFC_MAC_DESC_ID_INVALID 0xff
|
|
/* b[7:5] -reuse guard, b[4:0] -value */
|
#define WLFC_MAC_DESC_GET_LOOKUP_INDEX(x) ((x) & 0x1f)
|
|
#define WLFC_PKTFLAG_SET_PKTREQUESTED(x) (x) |= \
|
(WLFC_PKTFLAG_PKT_REQUESTED << WL_TXSTATUS_FLAGS_SHIFT)
|
|
#define WLFC_PKTFLAG_CLR_PKTREQUESTED(x) (x) &= \
|
~(WLFC_PKTFLAG_PKT_REQUESTED << WL_TXSTATUS_FLAGS_SHIFT)
|
|
#define WLFC_MAX_PENDING_DATALEN 120
|
|
/* host is free to discard the packet */
|
#define WLFC_CTL_PKTFLAG_DISCARD 0
|
/* D11 suppressed a packet */
|
#define WLFC_CTL_PKTFLAG_D11SUPPRESS 1
|
/* WL firmware suppressed a packet because MAC is
|
already in PSMode (short time window)
|
*/
|
#define WLFC_CTL_PKTFLAG_WLSUPPRESS 2
|
/* Firmware tossed this packet */
|
#define WLFC_CTL_PKTFLAG_TOSSED_BYWLC 3
|
/* Firmware tossed after retries */
|
#define WLFC_CTL_PKTFLAG_DISCARD_NOACK 4
|
/* Firmware wrongly reported suppressed previously,now fixing to acked */
|
#define WLFC_CTL_PKTFLAG_SUPPRESS_ACKED 5
|
/* Firmware send this packet expired, lifetime expiration */
|
#define WLFC_CTL_PKTFLAG_EXPIRED 6
|
/* Firmware drop this packet for any other reason */
|
#define WLFC_CTL_PKTFLAG_DROPPED 7
|
/* Firmware free this packet */
|
#define WLFC_CTL_PKTFLAG_MKTFREE 8
|
/* Firmware dropped the frame after suppress retries reached max */
|
#define WLFC_CTL_PKTFLAG_MAX_SUP_RETR 9
|
|
/* Firmware forced packet lifetime expiry */
|
#define WLFC_CTL_PKTFLAG_FORCED_EXPIRED 10
|
|
#define WLFC_CTL_PKTFLAG_MASK (0x0f) /* For 4-bit mask with one extra bit */
|
|
#if defined(PROP_TXSTATUS_DEBUG) && !defined(BINCMP)
|
#define WLFC_DBGMESG(x) printf x
|
/* wlfc-breadcrumb */
|
#define WLFC_BREADCRUMB(x) do {if ((x) == NULL) \
|
{printf("WLFC :%d:caller:%p\n", \
|
__LINE__, CALL_SITE);}} while (0)
|
#define WLFC_WHEREIS(s) printf("WLFC: at %d, %s\n", __LINE__, (s))
|
#else
|
#define WLFC_DBGMESG(x)
|
#define WLFC_BREADCRUMB(x)
|
#define WLFC_WHEREIS(s)
|
#endif /* PROP_TXSTATUS_DEBUG && !BINCMP */
|
|
/* AMPDU host reorder packet flags */
|
#define WLHOST_REORDERDATA_MAXFLOWS 256
|
#define WLHOST_REORDERDATA_LEN 10
|
#define WLHOST_REORDERDATA_TOTLEN (WLHOST_REORDERDATA_LEN + 1 + 1) /* +tag +len */
|
|
#define WLHOST_REORDERDATA_FLOWID_OFFSET 0
|
#define WLHOST_REORDERDATA_MAXIDX_OFFSET 2
|
#define WLHOST_REORDERDATA_FLAGS_OFFSET 4
|
#define WLHOST_REORDERDATA_CURIDX_OFFSET 6
|
#define WLHOST_REORDERDATA_EXPIDX_OFFSET 8
|
|
#define WLHOST_REORDERDATA_DEL_FLOW 0x01
|
#define WLHOST_REORDERDATA_FLUSH_ALL 0x02
|
#define WLHOST_REORDERDATA_CURIDX_VALID 0x04
|
#define WLHOST_REORDERDATA_EXPIDX_VALID 0x08
|
#define WLHOST_REORDERDATA_NEW_HOLE 0x10
|
|
/* transaction id data len byte 0: rsvd, byte 1: seqnumber, byte 2-5 will be used for timestampe */
|
#define WLFC_CTL_TRANS_ID_LEN 6
|
#define WLFC_TYPE_TRANS_ID_LEN 6
|
|
#define WLFC_MODE_HANGER 1 /* use hanger */
|
#define WLFC_MODE_AFQ 2 /* use afq (At Firmware Queue) */
|
#define WLFC_IS_OLD_DEF(x) ((x & 1) || (x & 2))
|
|
#define WLFC_MODE_AFQ_SHIFT 2 /* afq bit */
|
#define WLFC_SET_AFQ(x, val) ((x) = \
|
((x) & ~(1 << WLFC_MODE_AFQ_SHIFT)) | \
|
(((val) & 1) << WLFC_MODE_AFQ_SHIFT))
|
/** returns TRUE if firmware supports 'at firmware queue' feature */
|
#define WLFC_GET_AFQ(x) (((x) >> WLFC_MODE_AFQ_SHIFT) & 1)
|
|
#define WLFC_MODE_REUSESEQ_SHIFT 3 /* seq reuse bit */
|
#define WLFC_SET_REUSESEQ(x, val) ((x) = \
|
((x) & ~(1 << WLFC_MODE_REUSESEQ_SHIFT)) | \
|
(((val) & 1) << WLFC_MODE_REUSESEQ_SHIFT))
|
|
/** returns TRUE if 'd11 sequence reuse' has been agreed upon between host and dongle */
|
#if defined(BCMPCIEDEV_ENABLED) && !defined(ROM_ENAB_RUNTIME_CHECK)
|
/* GET_REUSESEQ is always TRUE in pciedev */
|
#define WLFC_GET_REUSESEQ(x) (TRUE)
|
#else
|
#define WLFC_GET_REUSESEQ(x) (((x) >> WLFC_MODE_REUSESEQ_SHIFT) & 1)
|
#endif /* defined(BCMPCIEDEV_ENABLED) && !defined(ROM_ENAB_RUNTIME_CHECK) */
|
|
#define WLFC_MODE_REORDERSUPP_SHIFT 4 /* host reorder suppress pkt bit */
|
#define WLFC_SET_REORDERSUPP(x, val) ((x) = \
|
((x) & ~(1 << WLFC_MODE_REORDERSUPP_SHIFT)) | \
|
(((val) & 1) << WLFC_MODE_REORDERSUPP_SHIFT))
|
/** returns TRUE if 'reorder suppress' has been agreed upon between host and dongle */
|
#define WLFC_GET_REORDERSUPP(x) (((x) >> WLFC_MODE_REORDERSUPP_SHIFT) & 1)
|
|
#define FLOW_RING_CREATE 1u
|
#define FLOW_RING_DELETE 2u
|
#define FLOW_RING_FLUSH 3u
|
#define FLOW_RING_OPEN 4u
|
#define FLOW_RING_CLOSED 5u
|
#define FLOW_RING_FLUSHED 6u
|
#define FLOW_RING_TIM_SET 7u
|
#define FLOW_RING_TIM_RESET 8u
|
#define FLOW_RING_FLUSH_TXFIFO 9u
|
#define FLOW_RING_GET_PKT_MAX 10u
|
#define FLOW_RING_RESET_WEIGHT 11u
|
#define FLOW_RING_UPD_PRIOMAP 12u
|
#define FLOW_RING_HP2P_CREATE 13u
|
#define FLOW_RING_HP2P_DELETE 14u
|
#define FLOW_RING_GET_BUFFERED_TIME 15u
|
#define FLOW_RING_HP2P_TXQ_STRT 16u
|
#define FLOW_RING_HP2P_TXQ_STOP 17u
|
|
/* bit 7, indicating if is TID(1) or AC(0) mapped info in tid field) */
|
#define PCIEDEV_IS_AC_TID_MAP_MASK 0x80
|
|
#define WLFC_PCIEDEV_AC_PRIO_MAP 0
|
#define WLFC_PCIEDEV_TID_PRIO_MAP 1
|
#define WLFC_PCIEDEV_LLR_PRIO_MAP 2
|
|
void wlc_wlfc_set_pkttime(void* pkt, uint16 time);
|
|
/* reason for disabling APP, when none are set, APP will be enabled */
|
typedef enum {
|
APP_STS_FLOWRING_NO_APP = 0u, /* Reason code used by pciedev */
|
APP_STS_FLOWRING_CLOSED = 1u, /* Disable APP as flowring is closed */
|
APP_STS_CRYPTO_UNSUPPORTED = 2u, /* Secuirity type doesn't support APP */
|
APP_STS_80211_FRAGMENTATION = 3u, /* 802.11 fragmentation enabled */
|
APP_STS_MAX = 4u /* MAX */
|
} app_disable_reason_s;
|
|
/* shared structure between wlc and pciedev layer to set/reset a reason code */
|
typedef struct app_upd_sts {
|
bool set; /* if set, app is disabled for reason rsn */
|
bool sta; /* set if scb/flowring belong to sta */
|
app_disable_reason_s rsn; /* APP disable reason codes. */
|
} app_upd_sts_t;
|
|
#endif /* __wlfc_proto_definitions_h__ */
|
