* CA8210 IEEE 802.15.4 *
|
|
Required properties:
|
- compatible: Should be "cascoda,ca8210"
|
- reg: Controlling chip select
|
- spi-max-frequency: Maximum clock speed, should be *less than*
|
4000000
|
- spi-cpol: Requires inverted clock polarity
|
- reset-gpio: GPIO attached to reset
|
- irq-gpio: GPIO attached to IRQ
|
Optional properties:
|
- extclock-enable: Include for the ca8210 to route its 16MHz clock
|
to an output
|
- extclock-freq: Frequency in Hz of the external clock
|
- extclock-gpio: GPIO of the ca8210 to output the clock on
|
|
Example:
|
ca8210@0 {
|
compatible = "cascoda,ca8210";
|
reg = <0>;
|
spi-max-frequency = <3000000>;
|
spi-cpol;
|
reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
|
irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
extclock-enable;
|
extclock-freq = 16000000;
|
extclock-gpio = 2;
|
};
|
