/*
|
* Copyright 2019 Advanced Micro Devices, Inc.
|
*
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
* copy of this software and associated documentation files (the "Software"),
|
* to deal in the Software without restriction, including without limitation
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
* and/or sell copies of the Software, and to permit persons to whom the
|
* Software is furnished to do so, subject to the following conditions:
|
*
|
* The above copyright notice and this permission notice shall be included in
|
* all copies or substantial portions of the Software.
|
*
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
* OTHER DEALINGS IN THE SOFTWARE.
|
*
|
*/
|
#ifndef __SMU11_DRIVER_IF_NAVI10_H__
|
#define __SMU11_DRIVER_IF_NAVI10_H__
|
|
// *** IMPORTANT ***
|
// SMU TEAM: Always increment the interface version if
|
// any structure is changed in this file
|
// Be aware of that the version should be updated in
|
// smu_v11_0.h, maybe rename is also needed.
|
// #define SMU11_DRIVER_IF_VERSION 0x33
|
|
#define PPTABLE_NV10_SMU_VERSION 8
|
|
#define NUM_GFXCLK_DPM_LEVELS 16
|
#define NUM_SMNCLK_DPM_LEVELS 2
|
#define NUM_SOCCLK_DPM_LEVELS 8
|
#define NUM_MP0CLK_DPM_LEVELS 2
|
#define NUM_DCLK_DPM_LEVELS 8
|
#define NUM_VCLK_DPM_LEVELS 8
|
#define NUM_DCEFCLK_DPM_LEVELS 8
|
#define NUM_PHYCLK_DPM_LEVELS 8
|
#define NUM_DISPCLK_DPM_LEVELS 8
|
#define NUM_PIXCLK_DPM_LEVELS 8
|
#define NUM_UCLK_DPM_LEVELS 4
|
#define NUM_MP1CLK_DPM_LEVELS 2
|
#define NUM_LINK_LEVELS 2
|
|
|
#define MAX_GFXCLK_DPM_LEVEL (NUM_GFXCLK_DPM_LEVELS - 1)
|
#define MAX_SMNCLK_DPM_LEVEL (NUM_SMNCLK_DPM_LEVELS - 1)
|
#define MAX_SOCCLK_DPM_LEVEL (NUM_SOCCLK_DPM_LEVELS - 1)
|
#define MAX_MP0CLK_DPM_LEVEL (NUM_MP0CLK_DPM_LEVELS - 1)
|
#define MAX_DCLK_DPM_LEVEL (NUM_DCLK_DPM_LEVELS - 1)
|
#define MAX_VCLK_DPM_LEVEL (NUM_VCLK_DPM_LEVELS - 1)
|
#define MAX_DCEFCLK_DPM_LEVEL (NUM_DCEFCLK_DPM_LEVELS - 1)
|
#define MAX_DISPCLK_DPM_LEVEL (NUM_DISPCLK_DPM_LEVELS - 1)
|
#define MAX_PIXCLK_DPM_LEVEL (NUM_PIXCLK_DPM_LEVELS - 1)
|
#define MAX_PHYCLK_DPM_LEVEL (NUM_PHYCLK_DPM_LEVELS - 1)
|
#define MAX_UCLK_DPM_LEVEL (NUM_UCLK_DPM_LEVELS - 1)
|
#define MAX_MP1CLK_DPM_LEVEL (NUM_MP1CLK_DPM_LEVELS - 1)
|
#define MAX_LINK_LEVEL (NUM_LINK_LEVELS - 1)
|
|
//Gemini Modes
|
#define PPSMC_GeminiModeNone 0 //Single GPU board
|
#define PPSMC_GeminiModeMaster 1 //Master GPU on a Gemini board
|
#define PPSMC_GeminiModeSlave 2 //Slave GPU on a Gemini board
|
|
// Feature Control Defines
|
// DPM
|
#define FEATURE_DPM_PREFETCHER_BIT 0
|
#define FEATURE_DPM_GFXCLK_BIT 1
|
#define FEATURE_DPM_GFX_PACE_BIT 2
|
#define FEATURE_DPM_UCLK_BIT 3
|
#define FEATURE_DPM_SOCCLK_BIT 4
|
#define FEATURE_DPM_MP0CLK_BIT 5
|
#define FEATURE_DPM_LINK_BIT 6
|
#define FEATURE_DPM_DCEFCLK_BIT 7
|
#define FEATURE_MEM_VDDCI_SCALING_BIT 8
|
#define FEATURE_MEM_MVDD_SCALING_BIT 9
|
|
//Idle
|
#define FEATURE_DS_GFXCLK_BIT 10
|
#define FEATURE_DS_SOCCLK_BIT 11
|
#define FEATURE_DS_LCLK_BIT 12
|
#define FEATURE_DS_DCEFCLK_BIT 13
|
#define FEATURE_DS_UCLK_BIT 14
|
#define FEATURE_GFX_ULV_BIT 15
|
#define FEATURE_FW_DSTATE_BIT 16
|
#define FEATURE_GFXOFF_BIT 17
|
#define FEATURE_BACO_BIT 18
|
#define FEATURE_VCN_PG_BIT 19
|
#define FEATURE_JPEG_PG_BIT 20
|
#define FEATURE_USB_PG_BIT 21
|
#define FEATURE_RSMU_SMN_CG_BIT 22
|
//Throttler/Response
|
#define FEATURE_PPT_BIT 23
|
#define FEATURE_TDC_BIT 24
|
#define FEATURE_GFX_EDC_BIT 25
|
#define FEATURE_APCC_PLUS_BIT 26
|
#define FEATURE_GTHR_BIT 27
|
#define FEATURE_ACDC_BIT 28
|
#define FEATURE_VR0HOT_BIT 29
|
#define FEATURE_VR1HOT_BIT 30
|
#define FEATURE_FW_CTF_BIT 31
|
#define FEATURE_FAN_CONTROL_BIT 32
|
#define FEATURE_THERMAL_BIT 33
|
#define FEATURE_GFX_DCS_BIT 34
|
//VF
|
#define FEATURE_RM_BIT 35
|
#define FEATURE_LED_DISPLAY_BIT 36
|
//Other
|
#define FEATURE_GFX_SS_BIT 37
|
#define FEATURE_OUT_OF_BAND_MONITOR_BIT 38
|
#define FEATURE_TEMP_DEPENDENT_VMIN_BIT 39
|
|
#define FEATURE_MMHUB_PG_BIT 40
|
#define FEATURE_ATHUB_PG_BIT 41
|
#define FEATURE_APCC_DFLL_BIT 42
|
#define FEATURE_SPARE_43_BIT 43
|
#define FEATURE_SPARE_44_BIT 44
|
#define FEATURE_SPARE_45_BIT 45
|
#define FEATURE_SPARE_46_BIT 46
|
#define FEATURE_SPARE_47_BIT 47
|
#define FEATURE_SPARE_48_BIT 48
|
#define FEATURE_SPARE_49_BIT 49
|
#define FEATURE_SPARE_50_BIT 50
|
#define FEATURE_SPARE_51_BIT 51
|
#define FEATURE_SPARE_52_BIT 52
|
#define FEATURE_SPARE_53_BIT 53
|
#define FEATURE_SPARE_54_BIT 54
|
#define FEATURE_SPARE_55_BIT 55
|
#define FEATURE_SPARE_56_BIT 56
|
#define FEATURE_SPARE_57_BIT 57
|
#define FEATURE_SPARE_58_BIT 58
|
#define FEATURE_SPARE_59_BIT 59
|
#define FEATURE_SPARE_60_BIT 60
|
#define FEATURE_SPARE_61_BIT 61
|
#define FEATURE_SPARE_62_BIT 62
|
#define FEATURE_SPARE_63_BIT 63
|
#define NUM_FEATURES 64
|
|
// Debug Overrides Bitmask
|
#define DPM_OVERRIDE_DISABLE_SOCCLK_PID 0x00000001
|
#define DPM_OVERRIDE_DISABLE_UCLK_PID 0x00000002
|
#define DPM_OVERRIDE_DISABLE_VOLT_LINK_VCN_SOCCLK 0x00000004
|
#define DPM_OVERRIDE_ENABLE_FREQ_LINK_VCLK_SOCCLK 0x00000008
|
#define DPM_OVERRIDE_ENABLE_FREQ_LINK_DCLK_SOCCLK 0x00000010
|
#define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_SOCCLK 0x00000020
|
#define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_UCLK 0x00000040
|
#define DPM_OVERRIDE_DISABLE_VOLT_LINK_DCE_SOCCLK 0x00000080
|
#define DPM_OVERRIDE_DISABLE_VOLT_LINK_MP0_SOCCLK 0x00000100
|
#define DPM_OVERRIDE_DISABLE_DFLL_PLL_SHUTDOWN 0x00000200
|
#define DPM_OVERRIDE_DISABLE_MEMORY_TEMPERATURE_READ 0x00000400
|
|
// VR Mapping Bit Defines
|
#define VR_MAPPING_VR_SELECT_MASK 0x01
|
#define VR_MAPPING_VR_SELECT_SHIFT 0x00
|
|
#define VR_MAPPING_PLANE_SELECT_MASK 0x02
|
#define VR_MAPPING_PLANE_SELECT_SHIFT 0x01
|
|
// PSI Bit Defines
|
#define PSI_SEL_VR0_PLANE0_PSI0 0x01
|
#define PSI_SEL_VR0_PLANE0_PSI1 0x02
|
#define PSI_SEL_VR0_PLANE1_PSI0 0x04
|
#define PSI_SEL_VR0_PLANE1_PSI1 0x08
|
#define PSI_SEL_VR1_PLANE0_PSI0 0x10
|
#define PSI_SEL_VR1_PLANE0_PSI1 0x20
|
#define PSI_SEL_VR1_PLANE1_PSI0 0x40
|
#define PSI_SEL_VR1_PLANE1_PSI1 0x80
|
|
// Throttler Control/Status Bits
|
#define THROTTLER_PADDING_BIT 0
|
#define THROTTLER_TEMP_EDGE_BIT 1
|
#define THROTTLER_TEMP_HOTSPOT_BIT 2
|
#define THROTTLER_TEMP_MEM_BIT 3
|
#define THROTTLER_TEMP_VR_GFX_BIT 4
|
#define THROTTLER_TEMP_VR_MEM0_BIT 5
|
#define THROTTLER_TEMP_VR_MEM1_BIT 6
|
#define THROTTLER_TEMP_VR_SOC_BIT 7
|
#define THROTTLER_TEMP_LIQUID0_BIT 8
|
#define THROTTLER_TEMP_LIQUID1_BIT 9
|
#define THROTTLER_TEMP_PLX_BIT 10
|
#define THROTTLER_TEMP_SKIN_BIT 11
|
#define THROTTLER_TDC_GFX_BIT 12
|
#define THROTTLER_TDC_SOC_BIT 13
|
#define THROTTLER_PPT0_BIT 14
|
#define THROTTLER_PPT1_BIT 15
|
#define THROTTLER_PPT2_BIT 16
|
#define THROTTLER_PPT3_BIT 17
|
#define THROTTLER_FIT_BIT 18
|
#define THROTTLER_PPM_BIT 19
|
#define THROTTLER_APCC_BIT 20
|
|
// FW DState Features Control Bits
|
#define FW_DSTATE_SOC_ULV_BIT 0
|
#define FW_DSTATE_G6_HSR_BIT 1
|
#define FW_DSTATE_G6_PHY_VDDCI_OFF_BIT 2
|
#define FW_DSTATE_MP0_DS_BIT 3
|
#define FW_DSTATE_SMN_DS_BIT 4
|
#define FW_DSTATE_MP1_DS_BIT 5
|
#define FW_DSTATE_MP1_WHISPER_MODE_BIT 6
|
#define FW_DSTATE_LIV_MIN_BIT 7
|
#define FW_DSTATE_SOC_PLL_PWRDN_BIT 8
|
|
#define FW_DSTATE_SOC_ULV_MASK (1 << FW_DSTATE_SOC_ULV_BIT )
|
#define FW_DSTATE_G6_HSR_MASK (1 << FW_DSTATE_G6_HSR_BIT )
|
#define FW_DSTATE_G6_PHY_VDDCI_OFF_MASK (1 << FW_DSTATE_G6_PHY_VDDCI_OFF_BIT )
|
#define FW_DSTATE_MP1_DS_MASK (1 << FW_DSTATE_MP1_DS_BIT )
|
#define FW_DSTATE_MP0_DS_MASK (1 << FW_DSTATE_MP0_DS_BIT )
|
#define FW_DSTATE_SMN_DS_MASK (1 << FW_DSTATE_SMN_DS_BIT )
|
#define FW_DSTATE_MP1_WHISPER_MODE_MASK (1 << FW_DSTATE_MP1_WHISPER_MODE_BIT )
|
#define FW_DSTATE_LIV_MIN_MASK (1 << FW_DSTATE_LIV_MIN_BIT )
|
#define FW_DSTATE_SOC_PLL_PWRDN_MASK (1 << FW_DSTATE_SOC_PLL_PWRDN_BIT )
|
|
//I2C Interface
|
|
#define NUM_I2C_CONTROLLERS 8
|
|
#define I2C_CONTROLLER_ENABLED 1
|
#define I2C_CONTROLLER_DISABLED 0
|
|
#define MAX_SW_I2C_COMMANDS 8
|
|
typedef enum {
|
I2C_CONTROLLER_PORT_0 = 0, //CKSVII2C0
|
I2C_CONTROLLER_PORT_1 = 1, //CKSVII2C1
|
I2C_CONTROLLER_PORT_COUNT,
|
} I2cControllerPort_e;
|
|
typedef enum {
|
I2C_CONTROLLER_NAME_VR_GFX = 0,
|
I2C_CONTROLLER_NAME_VR_SOC,
|
I2C_CONTROLLER_NAME_VR_VDDCI,
|
I2C_CONTROLLER_NAME_VR_MVDD,
|
I2C_CONTROLLER_NAME_LIQUID0,
|
I2C_CONTROLLER_NAME_LIQUID1,
|
I2C_CONTROLLER_NAME_PLX,
|
I2C_CONTROLLER_NAME_SPARE,
|
I2C_CONTROLLER_NAME_COUNT,
|
} I2cControllerName_e;
|
|
typedef enum {
|
I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0,
|
I2C_CONTROLLER_THROTTLER_VR_GFX,
|
I2C_CONTROLLER_THROTTLER_VR_SOC,
|
I2C_CONTROLLER_THROTTLER_VR_VDDCI,
|
I2C_CONTROLLER_THROTTLER_VR_MVDD,
|
I2C_CONTROLLER_THROTTLER_LIQUID0,
|
I2C_CONTROLLER_THROTTLER_LIQUID1,
|
I2C_CONTROLLER_THROTTLER_PLX,
|
I2C_CONTROLLER_THROTTLER_COUNT,
|
} I2cControllerThrottler_e;
|
|
typedef enum {
|
I2C_CONTROLLER_PROTOCOL_VR_0,
|
I2C_CONTROLLER_PROTOCOL_VR_1,
|
I2C_CONTROLLER_PROTOCOL_TMP_0,
|
I2C_CONTROLLER_PROTOCOL_TMP_1,
|
I2C_CONTROLLER_PROTOCOL_SPARE_0,
|
I2C_CONTROLLER_PROTOCOL_SPARE_1,
|
I2C_CONTROLLER_PROTOCOL_COUNT,
|
} I2cControllerProtocol_e;
|
|
typedef struct {
|
uint8_t Enabled;
|
uint8_t Speed;
|
uint8_t Padding[2];
|
uint32_t SlaveAddress;
|
uint8_t ControllerPort;
|
uint8_t ControllerName;
|
uint8_t ThermalThrotter;
|
uint8_t I2cProtocol;
|
} I2cControllerConfig_t;
|
|
typedef enum {
|
I2C_PORT_SVD_SCL = 0,
|
I2C_PORT_GPIO,
|
} I2cPort_e;
|
|
typedef enum {
|
I2C_SPEED_FAST_50K = 0, //50 Kbits/s
|
I2C_SPEED_FAST_100K, //100 Kbits/s
|
I2C_SPEED_FAST_400K, //400 Kbits/s
|
I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode)
|
I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode)
|
I2C_SPEED_HIGH_2M, //2.3 Mbits/s
|
I2C_SPEED_COUNT,
|
} I2cSpeed_e;
|
|
typedef enum {
|
I2C_CMD_READ = 0,
|
I2C_CMD_WRITE,
|
I2C_CMD_COUNT,
|
} I2cCmdType_e;
|
|
#define CMDCONFIG_STOP_BIT 0
|
#define CMDCONFIG_RESTART_BIT 1
|
|
#define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT)
|
#define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT)
|
|
typedef struct {
|
uint8_t RegisterAddr; ////only valid for write, ignored for read
|
uint8_t Cmd; //Read(0) or Write(1)
|
uint8_t Data; //Return data for read. Data to send for write
|
uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command
|
} SwI2cCmd_t; //SW I2C Command Table
|
|
typedef struct {
|
uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1)
|
uint8_t I2CSpeed; //Slow(0) or Fast(1)
|
uint16_t SlaveAddress;
|
uint8_t NumCmds; //Number of commands
|
uint8_t Padding[3];
|
|
SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS];
|
|
uint32_t MmHubPadding[8]; // SMU internal use
|
|
} SwI2cRequest_t; // SW I2C Request Table
|
|
//D3HOT sequences
|
typedef enum {
|
BACO_SEQUENCE,
|
MSR_SEQUENCE,
|
BAMACO_SEQUENCE,
|
ULPS_SEQUENCE,
|
D3HOT_SEQUENCE_COUNT,
|
}D3HOTSequence_e;
|
|
//THis is aligned with RSMU PGFSM Register Mapping
|
typedef enum {
|
PG_DYNAMIC_MODE = 0,
|
PG_STATIC_MODE,
|
} PowerGatingMode_e;
|
|
//This is aligned with RSMU PGFSM Register Mapping
|
typedef enum {
|
PG_POWER_DOWN = 0,
|
PG_POWER_UP,
|
} PowerGatingSettings_e;
|
|
typedef struct {
|
uint32_t a; // store in IEEE float format in this variable
|
uint32_t b; // store in IEEE float format in this variable
|
uint32_t c; // store in IEEE float format in this variable
|
} QuadraticInt_t;
|
|
typedef struct {
|
uint32_t m; // store in IEEE float format in this variable
|
uint32_t b; // store in IEEE float format in this variable
|
} LinearInt_t;
|
|
typedef struct {
|
uint32_t a; // store in IEEE float format in this variable
|
uint32_t b; // store in IEEE float format in this variable
|
uint32_t c; // store in IEEE float format in this variable
|
} DroopInt_t;
|
|
typedef enum {
|
GFXCLK_SOURCE_PLL = 0,
|
GFXCLK_SOURCE_DFLL,
|
GFXCLK_SOURCE_COUNT,
|
} GfxclkSrc_e;
|
|
//Only Clks that have DPM descriptors are listed here
|
typedef enum {
|
PPCLK_GFXCLK = 0,
|
PPCLK_SOCCLK,
|
PPCLK_UCLK,
|
PPCLK_DCLK,
|
PPCLK_VCLK,
|
PPCLK_DCEFCLK,
|
PPCLK_DISPCLK,
|
PPCLK_PIXCLK,
|
PPCLK_PHYCLK,
|
PPCLK_COUNT,
|
} PPCLK_e;
|
|
typedef enum {
|
POWER_SOURCE_AC,
|
POWER_SOURCE_DC,
|
POWER_SOURCE_COUNT,
|
} POWER_SOURCE_e;
|
|
typedef enum {
|
PPT_THROTTLER_PPT0,
|
PPT_THROTTLER_PPT1,
|
PPT_THROTTLER_PPT2,
|
PPT_THROTTLER_PPT3,
|
PPT_THROTTLER_COUNT
|
} PPT_THROTTLER_e;
|
|
typedef enum {
|
VOLTAGE_MODE_AVFS = 0,
|
VOLTAGE_MODE_AVFS_SS,
|
VOLTAGE_MODE_SS,
|
VOLTAGE_MODE_COUNT,
|
} VOLTAGE_MODE_e;
|
|
|
typedef enum {
|
AVFS_VOLTAGE_GFX = 0,
|
AVFS_VOLTAGE_SOC,
|
AVFS_VOLTAGE_COUNT,
|
} AVFS_VOLTAGE_TYPE_e;
|
|
typedef enum {
|
UCLK_DIV_BY_1 = 0,
|
UCLK_DIV_BY_2,
|
UCLK_DIV_BY_4,
|
UCLK_DIV_BY_8,
|
} UCLK_DIV_e;
|
|
typedef enum {
|
GPIO_INT_POLARITY_ACTIVE_LOW = 0,
|
GPIO_INT_POLARITY_ACTIVE_HIGH,
|
} GpioIntPolarity_e;
|
|
typedef enum {
|
MEMORY_TYPE_GDDR6 = 0,
|
MEMORY_TYPE_HBM,
|
} MemoryType_e;
|
|
typedef enum {
|
PWR_CONFIG_TDP = 0,
|
PWR_CONFIG_TGP,
|
PWR_CONFIG_TCP_ESTIMATED,
|
PWR_CONFIG_TCP_MEASURED,
|
} PwrConfig_e;
|
|
typedef struct {
|
uint8_t VoltageMode; // 0 - AVFS only, 1- min(AVFS,SS), 2-SS only
|
uint8_t SnapToDiscrete; // 0 - Fine grained DPM, 1 - Discrete DPM
|
uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used
|
uint8_t Padding;
|
LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz)
|
QuadraticInt_t SsCurve; // Slow-slow curve (GHz->V)
|
} DpmDescriptor_t;
|
|
typedef enum {
|
TEMP_EDGE,
|
TEMP_HOTSPOT,
|
TEMP_MEM,
|
TEMP_VR_GFX,
|
TEMP_VR_MEM0,
|
TEMP_VR_MEM1,
|
TEMP_VR_SOC,
|
TEMP_LIQUID0,
|
TEMP_LIQUID1,
|
TEMP_PLX,
|
TEMP_COUNT
|
} TEMP_e;
|
|
//Out of band monitor status defines
|
//see SPEC //gpu/doc/soc_arch/spec/feature/SMBUS/SMBUS.xlsx
|
#define POWER_MANAGER_CONTROLLER_NOT_RUNNING 0
|
#define POWER_MANAGER_CONTROLLER_RUNNING 1
|
|
#define POWER_MANAGER_CONTROLLER_BIT 0
|
#define MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_BIT 8
|
#define GPU_DIE_TEMPERATURE_THROTTLING_BIT 9
|
#define HBM_DIE_TEMPERATURE_THROTTLING_BIT 10
|
#define TGP_THROTTLING_BIT 11
|
#define PCC_THROTTLING_BIT 12
|
#define HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_BIT 13
|
#define HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_BIT 14
|
|
#define POWER_MANAGER_CONTROLLER_MASK (1 << POWER_MANAGER_CONTROLLER_BIT )
|
#define MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_MASK (1 << MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_BIT )
|
#define GPU_DIE_TEMPERATURE_THROTTLING_MASK (1 << GPU_DIE_TEMPERATURE_THROTTLING_BIT )
|
#define HBM_DIE_TEMPERATURE_THROTTLING_MASK (1 << HBM_DIE_TEMPERATURE_THROTTLING_BIT )
|
#define TGP_THROTTLING_MASK (1 << TGP_THROTTLING_BIT )
|
#define PCC_THROTTLING_MASK (1 << PCC_THROTTLING_BIT )
|
#define HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_MASK (1 << HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_BIT )
|
#define HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_MASK (1 << HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_BIT)
|
|
//This structure to be DMA to SMBUS Config register space
|
typedef struct {
|
uint8_t MinorInfoVersion;
|
uint8_t MajorInfoVersion;
|
uint8_t TableSize;
|
uint8_t Reserved;
|
|
uint8_t Reserved1;
|
uint8_t RevID;
|
uint16_t DeviceID;
|
|
uint16_t DieTemperatureLimit;
|
uint16_t FanTargetTemperature;
|
|
uint16_t MemoryTemperatureLimit;
|
uint16_t MemoryTemperatureLimit1;
|
|
uint16_t TGP;
|
uint16_t CardPower;
|
|
uint32_t DieTemperatureRegisterOffset;
|
|
uint32_t Reserved2;
|
|
uint32_t Reserved3;
|
|
uint32_t Status;
|
|
uint16_t DieTemperature;
|
uint16_t CurrentMemoryTemperature;
|
|
uint16_t MemoryTemperature;
|
uint8_t MemoryHotspotPosition;
|
uint8_t Reserved4;
|
|
uint32_t BoardLevelEnergyAccumulator;
|
} OutOfBandMonitor_t;
|
|
typedef struct {
|
uint32_t Version;
|
|
// SECTION: Feature Enablement
|
uint32_t FeaturesToRun[2];
|
|
// SECTION: Infrastructure Limits
|
uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT];
|
uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT];
|
uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT];
|
uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT];
|
|
uint16_t TdcLimitSoc; // Amps
|
uint16_t TdcLimitSocTau; // Time constant of LPF in ms
|
uint16_t TdcLimitGfx; // Amps
|
uint16_t TdcLimitGfxTau; // Time constant of LPF in ms
|
|
uint16_t TedgeLimit; // Celcius
|
uint16_t ThotspotLimit; // Celcius
|
uint16_t TmemLimit; // Celcius
|
uint16_t Tvr_gfxLimit; // Celcius
|
uint16_t Tvr_mem0Limit; // Celcius
|
uint16_t Tvr_mem1Limit; // Celcius
|
uint16_t Tvr_socLimit; // Celcius
|
uint16_t Tliquid0Limit; // Celcius
|
uint16_t Tliquid1Limit; // Celcius
|
uint16_t TplxLimit; // Celcius
|
uint32_t FitLimit; // Failures in time (failures per million parts over the defined lifetime)
|
|
uint16_t PpmPowerLimit; // Switch this this power limit when temperature is above PpmTempThreshold
|
uint16_t PpmTemperatureThreshold;
|
|
// SECTION: Throttler settings
|
uint32_t ThrottlerControlMask; // See Throtter masks defines
|
|
// SECTION: FW DSTATE Settings
|
uint32_t FwDStateMask; // See FW DState masks defines
|
|
// SECTION: ULV Settings
|
uint16_t UlvVoltageOffsetSoc; // In mV(Q2)
|
uint16_t UlvVoltageOffsetGfx; // In mV(Q2)
|
|
uint8_t GceaLinkMgrIdleThreshold; //Set by SMU FW during enablment of SOC_ULV. Controls delay for GFX SDP port disconnection during idle events
|
uint8_t paddingRlcUlvParams[3];
|
|
uint8_t UlvSmnclkDid; //DID for ULV mode. 0 means CLK will not be modified in ULV.
|
uint8_t UlvMp1clkDid; //DID for ULV mode. 0 means CLK will not be modified in ULV.
|
uint8_t UlvGfxclkBypass; // 1 to turn off/bypass Gfxclk during ULV, 0 to leave Gfxclk on during ULV
|
uint8_t Padding234;
|
|
uint16_t MinVoltageUlvGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX in ULV mode
|
uint16_t MinVoltageUlvSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC in ULV mode
|
|
|
// SECTION: Voltage Control Parameters
|
uint16_t MinVoltageGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX
|
uint16_t MinVoltageSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC
|
uint16_t MaxVoltageGfx; // In mV(Q2) Maximum Voltage allowable of VDD_GFX
|
uint16_t MaxVoltageSoc; // In mV(Q2) Maximum Voltage allowable of VDD_SOC
|
|
uint16_t LoadLineResistanceGfx; // In mOhms with 8 fractional bits
|
uint16_t LoadLineResistanceSoc; // In mOhms with 8 fractional bits
|
|
//SECTION: DPM Config 1
|
DpmDescriptor_t DpmDescriptor[PPCLK_COUNT];
|
|
uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz
|
uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz
|
uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz
|
uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz
|
uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz
|
uint16_t FreqTableDcefclk [NUM_DCEFCLK_DPM_LEVELS ]; // In MHz
|
uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz
|
uint16_t FreqTablePixclk [NUM_PIXCLK_DPM_LEVELS ]; // In MHz
|
uint16_t FreqTablePhyclk [NUM_PHYCLK_DPM_LEVELS ]; // In MHz
|
uint32_t Paddingclks[16];
|
|
uint16_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz
|
uint16_t Padding8_Clks;
|
|
uint8_t FreqTableUclkDiv [NUM_UCLK_DPM_LEVELS ]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8
|
|
// SECTION: DPM Config 2
|
uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz
|
uint16_t Mp0DpmVoltage [NUM_MP0CLK_DPM_LEVELS]; // mV(Q2)
|
uint16_t MemVddciVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2)
|
uint16_t MemMvddVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2)
|
// GFXCLK DPM
|
uint16_t GfxclkFgfxoffEntry; // in Mhz
|
uint16_t GfxclkFinit; // in Mhz
|
uint16_t GfxclkFidle; // in MHz
|
uint16_t GfxclkSlewRate; // for PLL babystepping???
|
uint16_t GfxclkFopt; // in Mhz
|
uint8_t Padding567[2];
|
uint16_t GfxclkDsMaxFreq; // in MHz
|
uint8_t GfxclkSource; // 0 = PLL, 1 = DFLL
|
uint8_t Padding456;
|
|
// UCLK section
|
uint8_t LowestUclkReservedForUlv; // Set this to 1 if UCLK DPM0 is reserved for ULV-mode only
|
uint8_t paddingUclk[3];
|
|
uint8_t MemoryType; // 0-GDDR6, 1-HBM
|
uint8_t MemoryChannels;
|
uint8_t PaddingMem[2];
|
|
// Link DPM Settings
|
uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4
|
uint8_t PcieLaneCount[NUM_LINK_LEVELS]; ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16
|
uint16_t LclkFreq[NUM_LINK_LEVELS];
|
|
// GFXCLK Thermal DPM (formerly 'Boost' Settings)
|
uint16_t EnableTdpm;
|
uint16_t TdpmHighHystTemperature;
|
uint16_t TdpmLowHystTemperature;
|
uint16_t GfxclkFreqHighTempLimit; // High limit on GFXCLK when temperature is high, for reliability.
|
|
// SECTION: Fan Control
|
uint16_t FanStopTemp; //Celcius
|
uint16_t FanStartTemp; //Celcius
|
|
uint16_t FanGainEdge;
|
uint16_t FanGainHotspot;
|
uint16_t FanGainLiquid0;
|
uint16_t FanGainLiquid1;
|
uint16_t FanGainVrGfx;
|
uint16_t FanGainVrSoc;
|
uint16_t FanGainVrMem0;
|
uint16_t FanGainVrMem1;
|
uint16_t FanGainPlx;
|
uint16_t FanGainMem;
|
uint16_t FanPwmMin;
|
uint16_t FanAcousticLimitRpm;
|
uint16_t FanThrottlingRpm;
|
uint16_t FanMaximumRpm;
|
uint16_t FanTargetTemperature;
|
uint16_t FanTargetGfxclk;
|
uint8_t FanTempInputSelect;
|
uint8_t FanPadding;
|
uint8_t FanZeroRpmEnable;
|
uint8_t FanTachEdgePerRev;
|
//uint8_t padding8_Fan[2];
|
|
// The following are AFC override parameters. Leave at 0 to use FW defaults.
|
int16_t FuzzyFan_ErrorSetDelta;
|
int16_t FuzzyFan_ErrorRateSetDelta;
|
int16_t FuzzyFan_PwmSetDelta;
|
uint16_t FuzzyFan_Reserved;
|
|
|
// SECTION: AVFS
|
// Overrides
|
uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT];
|
uint8_t Padding8_Avfs[2];
|
|
QuadraticInt_t qAvfsGb[AVFS_VOLTAGE_COUNT]; // GHz->V Override of fused curve
|
DroopInt_t dBtcGbGfxPll; // GHz->V BtcGb
|
DroopInt_t dBtcGbGfxDfll; // GHz->V BtcGb
|
DroopInt_t dBtcGbSoc; // GHz->V BtcGb
|
LinearInt_t qAgingGb[AVFS_VOLTAGE_COUNT]; // GHz->V
|
|
QuadraticInt_t qStaticVoltageOffset[AVFS_VOLTAGE_COUNT]; // GHz->V
|
|
uint16_t DcTol[AVFS_VOLTAGE_COUNT]; // mV Q2
|
|
uint8_t DcBtcEnabled[AVFS_VOLTAGE_COUNT];
|
uint8_t Padding8_GfxBtc[2];
|
|
uint16_t DcBtcMin[AVFS_VOLTAGE_COUNT]; // mV Q2
|
uint16_t DcBtcMax[AVFS_VOLTAGE_COUNT]; // mV Q2
|
|
// SECTION: Advanced Options
|
uint32_t DebugOverrides;
|
QuadraticInt_t ReservedEquation0;
|
QuadraticInt_t ReservedEquation1;
|
QuadraticInt_t ReservedEquation2;
|
QuadraticInt_t ReservedEquation3;
|
|
// Total Power configuration, use defines from PwrConfig_e
|
uint8_t TotalPowerConfig; //0-TDP, 1-TGP, 2-TCP Estimated, 3-TCP Measured
|
uint8_t TotalPowerSpare1;
|
uint16_t TotalPowerSpare2;
|
|
// APCC Settings
|
uint16_t PccThresholdLow;
|
uint16_t PccThresholdHigh;
|
uint32_t MGpuFanBoostLimitRpm;
|
uint32_t PaddingAPCC[5];
|
|
// Temperature Dependent Vmin
|
uint16_t VDDGFX_TVmin; //Celcius
|
uint16_t VDDSOC_TVmin; //Celcius
|
uint16_t VDDGFX_Vmin_HiTemp; // mV Q2
|
uint16_t VDDGFX_Vmin_LoTemp; // mV Q2
|
uint16_t VDDSOC_Vmin_HiTemp; // mV Q2
|
uint16_t VDDSOC_Vmin_LoTemp; // mV Q2
|
|
uint16_t VDDGFX_TVminHystersis; // Celcius
|
uint16_t VDDSOC_TVminHystersis; // Celcius
|
|
// BTC Setting
|
uint32_t BtcConfig;
|
|
uint16_t SsFmin[10]; // PPtable value to function similar to VFTFmin for SS Curve; Size is PPCLK_COUNT rounded to nearest multiple of 2
|
uint16_t DcBtcGb[AVFS_VOLTAGE_COUNT];
|
|
// SECTION: Board Reserved
|
uint32_t Reserved[8];
|
|
// SECTION: BOARD PARAMETERS
|
// I2C Control
|
I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS];
|
|
// SVI2 Board Parameters
|
uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
|
uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
|
|
uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields
|
uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields
|
uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields
|
uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields
|
|
uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN)
|
uint8_t Padding8_V;
|
|
// Telemetry Settings
|
uint16_t GfxMaxCurrent; // in Amps
|
int8_t GfxOffset; // in Amps
|
uint8_t Padding_TelemetryGfx;
|
|
uint16_t SocMaxCurrent; // in Amps
|
int8_t SocOffset; // in Amps
|
uint8_t Padding_TelemetrySoc;
|
|
uint16_t Mem0MaxCurrent; // in Amps
|
int8_t Mem0Offset; // in Amps
|
uint8_t Padding_TelemetryMem0;
|
|
uint16_t Mem1MaxCurrent; // in Amps
|
int8_t Mem1Offset; // in Amps
|
uint8_t Padding_TelemetryMem1;
|
|
// GPIO Settings
|
uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching
|
uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching
|
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
|
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
|
|
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
|
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
|
uint8_t GthrGpio; // GPIO pin configured for GTHR Event
|
uint8_t GthrPolarity; // replace GPIO polarity for GTHR
|
|
// LED Display Settings
|
uint8_t LedPin0; // GPIO number for LedPin[0]
|
uint8_t LedPin1; // GPIO number for LedPin[1]
|
uint8_t LedPin2; // GPIO number for LedPin[2]
|
uint8_t padding8_4;
|
|
// GFXCLK PLL Spread Spectrum
|
uint8_t PllGfxclkSpreadEnabled; // on or off
|
uint8_t PllGfxclkSpreadPercent; // Q4.4
|
uint16_t PllGfxclkSpreadFreq; // kHz
|
|
// GFXCLK DFLL Spread Spectrum
|
uint8_t DfllGfxclkSpreadEnabled; // on or off
|
uint8_t DfllGfxclkSpreadPercent; // Q4.4
|
uint16_t DfllGfxclkSpreadFreq; // kHz
|
|
// UCLK Spread Spectrum
|
uint8_t UclkSpreadEnabled; // on or off
|
uint8_t UclkSpreadPercent; // Q4.4
|
uint16_t UclkSpreadFreq; // kHz
|
|
// SOCCLK Spread Spectrum
|
uint8_t SoclkSpreadEnabled; // on or off
|
uint8_t SocclkSpreadPercent; // Q4.4
|
uint16_t SocclkSpreadFreq; // kHz
|
|
// Total board power
|
uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
|
uint16_t BoardPadding;
|
|
// Mvdd Svi2 Div Ratio Setting
|
uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16)
|
|
uint8_t RenesesLoadLineEnabled;
|
uint8_t GfxLoadlineResistance;
|
uint8_t SocLoadlineResistance;
|
uint8_t Padding8_Loadline;
|
|
uint32_t BoardReserved[8];
|
|
// Padding for MMHUB - do not modify this
|
uint32_t MmHubPadding[8]; // SMU internal use
|
|
} PPTable_t;
|
|
typedef struct {
|
// Time constant parameters for clock averages in ms
|
uint16_t GfxclkAverageLpfTau;
|
uint16_t SocclkAverageLpfTau;
|
uint16_t UclkAverageLpfTau;
|
uint16_t GfxActivityLpfTau;
|
uint16_t UclkActivityLpfTau;
|
uint16_t SocketPowerLpfTau;
|
|
// Padding - ignore
|
uint32_t MmHubPadding[8]; // SMU internal use
|
} DriverSmuConfig_t;
|
|
typedef struct {
|
|
uint16_t GfxclkFmin; // MHz
|
uint16_t GfxclkFmax; // MHz
|
uint16_t GfxclkFreq1; // MHz
|
uint16_t GfxclkVolt1; // mV (Q2)
|
uint16_t GfxclkFreq2; // MHz
|
uint16_t GfxclkVolt2; // mV (Q2)
|
uint16_t GfxclkFreq3; // MHz
|
uint16_t GfxclkVolt3; // mV (Q2)
|
uint16_t UclkFmax; // MHz
|
int16_t OverDrivePct; // %
|
uint16_t FanMaximumRpm;
|
uint16_t FanMinimumPwm;
|
uint16_t FanTargetTemperature; // Degree Celcius
|
uint16_t MaxOpTemp; // Degree Celcius
|
uint16_t FanZeroRpmEnable;
|
uint16_t Padding;
|
|
uint32_t MmHubPadding[8]; // SMU internal use
|
|
} OverDriveTable_t;
|
|
typedef struct {
|
uint16_t CurrClock[PPCLK_COUNT];
|
uint16_t AverageGfxclkFrequency;
|
uint16_t AverageSocclkFrequency;
|
uint16_t AverageUclkFrequency ;
|
uint16_t AverageGfxActivity ;
|
uint16_t AverageUclkActivity ;
|
uint8_t CurrSocVoltageOffset ;
|
uint8_t CurrGfxVoltageOffset ;
|
uint8_t CurrMemVidOffset ;
|
uint8_t Padding8 ;
|
uint16_t AverageSocketPower ;
|
uint16_t TemperatureEdge ;
|
uint16_t TemperatureHotspot ;
|
uint16_t TemperatureMem ;
|
uint16_t TemperatureVrGfx ;
|
uint16_t TemperatureVrMem0 ;
|
uint16_t TemperatureVrMem1 ;
|
uint16_t TemperatureVrSoc ;
|
uint16_t TemperatureLiquid0 ;
|
uint16_t TemperatureLiquid1 ;
|
uint16_t TemperaturePlx ;
|
uint16_t Padding16 ;
|
uint32_t ThrottlerStatus ;
|
|
uint8_t LinkDpmLevel;
|
uint8_t Padding8_2;
|
uint16_t CurrFanSpeed;
|
|
// Padding - ignore
|
uint32_t MmHubPadding[8]; // SMU internal use
|
} SmuMetrics_t;
|
|
typedef struct {
|
uint16_t CurrClock[PPCLK_COUNT];
|
uint16_t AverageGfxclkFrequency;
|
uint16_t AverageSocclkFrequency;
|
uint16_t AverageUclkFrequency ;
|
uint16_t AverageGfxActivity ;
|
uint16_t AverageUclkActivity ;
|
uint8_t CurrSocVoltageOffset ;
|
uint8_t CurrGfxVoltageOffset ;
|
uint8_t CurrMemVidOffset ;
|
uint8_t Padding8 ;
|
uint16_t AverageSocketPower ;
|
uint16_t TemperatureEdge ;
|
uint16_t TemperatureHotspot ;
|
uint16_t TemperatureMem ;
|
uint16_t TemperatureVrGfx ;
|
uint16_t TemperatureVrMem0 ;
|
uint16_t TemperatureVrMem1 ;
|
uint16_t TemperatureVrSoc ;
|
uint16_t TemperatureLiquid0 ;
|
uint16_t TemperatureLiquid1 ;
|
uint16_t TemperaturePlx ;
|
uint16_t Padding16 ;
|
uint32_t ThrottlerStatus ;
|
|
uint8_t LinkDpmLevel;
|
uint8_t Padding8_2;
|
uint16_t CurrFanSpeed;
|
|
uint32_t EnergyAccumulator;
|
uint16_t AverageVclkFrequency ;
|
uint16_t AverageDclkFrequency ;
|
uint16_t VcnActivityPercentage ;
|
uint16_t padding16_2;
|
|
// Padding - ignore
|
uint32_t MmHubPadding[8]; // SMU internal use
|
} SmuMetrics_NV12_t;
|
|
typedef struct {
|
uint16_t MinClock; // This is either DCEFCLK or SOCCLK (in MHz)
|
uint16_t MaxClock; // This is either DCEFCLK or SOCCLK (in MHz)
|
uint16_t MinUclk;
|
uint16_t MaxUclk;
|
|
uint8_t WmSetting;
|
uint8_t Padding[3];
|
|
uint32_t MmHubPadding[8]; // SMU internal use
|
} WatermarkRowGeneric_t;
|
|
#define NUM_WM_RANGES 4
|
|
typedef enum {
|
WM_SOCCLK = 0,
|
WM_DCEFCLK,
|
WM_COUNT,
|
} WM_CLOCK_e;
|
|
typedef struct {
|
// Watermarks
|
WatermarkRowGeneric_t WatermarkRow[WM_COUNT][NUM_WM_RANGES];
|
|
uint32_t MmHubPadding[8]; // SMU internal use
|
} Watermarks_t;
|
|
typedef struct {
|
uint16_t avgPsmCount[28];
|
uint16_t minPsmCount[28];
|
float avgPsmVoltage[28];
|
float minPsmVoltage[28];
|
|
uint32_t MmHubPadding[32]; // SMU internal use
|
} AvfsDebugTable_t_NV14;
|
|
typedef struct {
|
uint16_t avgPsmCount[36];
|
uint16_t minPsmCount[36];
|
float avgPsmVoltage[36];
|
float minPsmVoltage[36];
|
|
uint32_t MmHubPadding[8]; // SMU internal use
|
} AvfsDebugTable_t_NV10;
|
|
typedef struct {
|
uint8_t AvfsVersion;
|
uint8_t Padding;
|
|
uint8_t AvfsEn[AVFS_VOLTAGE_COUNT];
|
|
uint8_t OverrideVFT[AVFS_VOLTAGE_COUNT];
|
uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT];
|
|
uint8_t OverrideTemperatures[AVFS_VOLTAGE_COUNT];
|
uint8_t OverrideVInversion[AVFS_VOLTAGE_COUNT];
|
uint8_t OverrideP2V[AVFS_VOLTAGE_COUNT];
|
uint8_t OverrideP2VCharzFreq[AVFS_VOLTAGE_COUNT];
|
|
int32_t VFT0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24
|
int32_t VFT0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12
|
int32_t VFT0_b[AVFS_VOLTAGE_COUNT]; // Q32
|
|
int32_t VFT1_m1[AVFS_VOLTAGE_COUNT]; // Q8.16
|
int32_t VFT1_m2[AVFS_VOLTAGE_COUNT]; // Q12.12
|
int32_t VFT1_b[AVFS_VOLTAGE_COUNT]; // Q32
|
|
int32_t VFT2_m1[AVFS_VOLTAGE_COUNT]; // Q8.16
|
int32_t VFT2_m2[AVFS_VOLTAGE_COUNT]; // Q12.12
|
int32_t VFT2_b[AVFS_VOLTAGE_COUNT]; // Q32
|
|
int32_t AvfsGb0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24
|
int32_t AvfsGb0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12
|
int32_t AvfsGb0_b[AVFS_VOLTAGE_COUNT]; // Q32
|
|
int32_t AcBtcGb_m1[AVFS_VOLTAGE_COUNT]; // Q8.24
|
int32_t AcBtcGb_m2[AVFS_VOLTAGE_COUNT]; // Q12.12
|
int32_t AcBtcGb_b[AVFS_VOLTAGE_COUNT]; // Q32
|
|
uint32_t AvfsTempCold[AVFS_VOLTAGE_COUNT];
|
uint32_t AvfsTempMid[AVFS_VOLTAGE_COUNT];
|
uint32_t AvfsTempHot[AVFS_VOLTAGE_COUNT];
|
|
uint32_t VInversion[AVFS_VOLTAGE_COUNT]; // in mV with 2 fractional bits
|
|
|
int32_t P2V_m1[AVFS_VOLTAGE_COUNT]; // Q8.24
|
int32_t P2V_m2[AVFS_VOLTAGE_COUNT]; // Q12.12
|
int32_t P2V_b[AVFS_VOLTAGE_COUNT]; // Q32
|
|
uint32_t P2VCharzFreq[AVFS_VOLTAGE_COUNT]; // in 10KHz units
|
|
uint32_t EnabledAvfsModules[2]; //NV10 - 36 AVFS modules
|
|
uint32_t MmHubPadding[8]; // SMU internal use
|
} AvfsFuseOverride_t;
|
|
typedef struct {
|
|
uint8_t Gfx_ActiveHystLimit;
|
uint8_t Gfx_IdleHystLimit;
|
uint8_t Gfx_FPS;
|
uint8_t Gfx_MinActiveFreqType;
|
uint8_t Gfx_BoosterFreqType;
|
uint8_t Gfx_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock.
|
uint16_t Gfx_MinActiveFreq; // MHz
|
uint16_t Gfx_BoosterFreq; // MHz
|
uint16_t Gfx_PD_Data_time_constant; // Time constant of PD controller in ms
|
uint32_t Gfx_PD_Data_limit_a; // Q16
|
uint32_t Gfx_PD_Data_limit_b; // Q16
|
uint32_t Gfx_PD_Data_limit_c; // Q16
|
uint32_t Gfx_PD_Data_error_coeff; // Q16
|
uint32_t Gfx_PD_Data_error_rate_coeff; // Q16
|
|
uint8_t Soc_ActiveHystLimit;
|
uint8_t Soc_IdleHystLimit;
|
uint8_t Soc_FPS;
|
uint8_t Soc_MinActiveFreqType;
|
uint8_t Soc_BoosterFreqType;
|
uint8_t Soc_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock.
|
uint16_t Soc_MinActiveFreq; // MHz
|
uint16_t Soc_BoosterFreq; // MHz
|
uint16_t Soc_PD_Data_time_constant; // Time constant of PD controller in ms
|
uint32_t Soc_PD_Data_limit_a; // Q16
|
uint32_t Soc_PD_Data_limit_b; // Q16
|
uint32_t Soc_PD_Data_limit_c; // Q16
|
uint32_t Soc_PD_Data_error_coeff; // Q16
|
uint32_t Soc_PD_Data_error_rate_coeff; // Q16
|
|
uint8_t Mem_ActiveHystLimit;
|
uint8_t Mem_IdleHystLimit;
|
uint8_t Mem_FPS;
|
uint8_t Mem_MinActiveFreqType;
|
uint8_t Mem_BoosterFreqType;
|
uint8_t Mem_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock.
|
uint16_t Mem_MinActiveFreq; // MHz
|
uint16_t Mem_BoosterFreq; // MHz
|
uint16_t Mem_PD_Data_time_constant; // Time constant of PD controller in ms
|
uint32_t Mem_PD_Data_limit_a; // Q16
|
uint32_t Mem_PD_Data_limit_b; // Q16
|
uint32_t Mem_PD_Data_limit_c; // Q16
|
uint32_t Mem_PD_Data_error_coeff; // Q16
|
uint32_t Mem_PD_Data_error_rate_coeff; // Q16
|
|
uint32_t Mem_UpThreshold_Limit; // Q16
|
uint8_t Mem_UpHystLimit;
|
uint8_t Mem_DownHystLimit;
|
uint16_t Mem_Fps;
|
|
uint32_t MmHubPadding[8]; // SMU internal use
|
|
} DpmActivityMonitorCoeffInt_t;
|
|
|
// Workload bits
|
#define WORKLOAD_PPLIB_DEFAULT_BIT 0
|
#define WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT 1
|
#define WORKLOAD_PPLIB_POWER_SAVING_BIT 2
|
#define WORKLOAD_PPLIB_VIDEO_BIT 3
|
#define WORKLOAD_PPLIB_VR_BIT 4
|
#define WORKLOAD_PPLIB_COMPUTE_BIT 5
|
#define WORKLOAD_PPLIB_CUSTOM_BIT 6
|
#define WORKLOAD_PPLIB_COUNT 7
|
|
|
// These defines are used with the following messages:
|
// SMC_MSG_TransferTableDram2Smu
|
// SMC_MSG_TransferTableSmu2Dram
|
|
// Table transfer status
|
#define TABLE_TRANSFER_OK 0x0
|
#define TABLE_TRANSFER_FAILED 0xFF
|
|
// Table types
|
#define TABLE_PPTABLE 0
|
#define TABLE_WATERMARKS 1
|
#define TABLE_AVFS 2
|
#define TABLE_AVFS_PSM_DEBUG 3
|
#define TABLE_AVFS_FUSE_OVERRIDE 4
|
#define TABLE_PMSTATUSLOG 5
|
#define TABLE_SMU_METRICS 6
|
#define TABLE_DRIVER_SMU_CONFIG 7
|
#define TABLE_ACTIVITY_MONITOR_COEFF 8
|
#define TABLE_OVERDRIVE 9
|
#define TABLE_I2C_COMMANDS 10
|
#define TABLE_PACE 11
|
#define TABLE_COUNT 12
|
|
//RLC Pace Table total number of levels
|
#define RLC_PACE_TABLE_NUM_LEVELS 16
|
|
typedef struct {
|
float FlopsPerByteTable[RLC_PACE_TABLE_NUM_LEVELS];
|
|
uint32_t MmHubPadding[8]; // SMU internal use
|
} RlcPaceFlopsPerByteOverride_t;
|
|
// These defines are used with the SMC_MSG_SetUclkFastSwitch message.
|
#define UCLK_SWITCH_SLOW 0
|
#define UCLK_SWITCH_FAST 1
|
#endif
|
