1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
| NVIDIA Tegra114 pinmux controller
|
| The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30
| pinctrl binding, as described in nvidia,tegra20-pinmux.txt and
| nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
| a baseline, and only documents the differences between the two bindings.
|
| Required properties:
| - compatible: "nvidia,tegra114-pinmux"
| - reg: Should contain the register physical address and length for each of
| the pad control and mux registers. The first bank of address must be the
| driver strength pad control register address and second bank address must
| be pinmux register address.
|
| Tegra114 adds the following optional properties for pin configuration subnodes:
| - nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
| - nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
| - nvidia,lock: Integer. Lock the pin configuration against further changes
| until reset. 0: no, 1: yes.
| - nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
| - nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high.
| - nvidia,drive-type: Integer. Valid range 0...3.
|
| As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding
| which groups support which functionality.
|
| Valid values for pin and group names are:
|
| per-pin mux groups:
|
| These all support nvidia,function, nvidia,tristate, nvidia,pull,
| nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
| nvidia,io-reset and nvidia,rcv-sel.
|
| ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4,
| ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0,
| ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0,
| dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
| sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6,
| sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4,
| ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
| uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1,
| uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5,
| gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7,
| clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
| gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3,
| gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0,
| gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
| gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
| gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
| gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0,
| gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5,
| gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
| sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
| sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0,
| pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
| pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1,
| kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6,
| kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0,
| kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
| kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req,
| cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
| dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5,
| dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
| gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4,
| gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6,
| sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
| sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
| gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5,
| sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n.
|
| drive groups:
|
| These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
| nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
| support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode
| and nvidia,drive-type.
|
| ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4,
| dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
| gmh, owr, uda.
|
| Valid values for nvidia,functions are:
|
| blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
| displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2,
| extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr,
| i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi,
| pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3,
| rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3,
| spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi,
| usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3
|
| Example:
|
| pinmux: pinmux {
| compatible = "nvidia,tegra114-pinmux";
| reg = <0x70000868 0x148 /* Pad control registers */
| 0x70003000 0x40c>; /* PinMux registers */
| };
|
| Example board file extract:
|
| pinctrl {
| sdmmc4_default: pinmux {
| sdmmc4_clk_pcc4 {
| nvidia,pins = "sdmmc4_clk_pcc4",
| nvidia,function = "sdmmc4";
| nvidia,pull = <0>;
| nvidia,tristate = <0>;
| };
| sdmmc4_dat0_paa0 {
| nvidia,pins = "sdmmc4_dat0_paa0",
| "sdmmc4_dat1_paa1",
| "sdmmc4_dat2_paa2",
| "sdmmc4_dat3_paa3",
| "sdmmc4_dat4_paa4",
| "sdmmc4_dat5_paa5",
| "sdmmc4_dat6_paa6",
| "sdmmc4_dat7_paa7";
| nvidia,function = "sdmmc4";
| nvidia,pull = <2>;
| nvidia,tristate = <0>;
| };
| };
| };
|
| sdhci@78000400 {
| pinctrl-names = "default";
| pinctrl-0 = <&sdmmc4_default>;
| };
|
|
