1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
| Everest ES8311 audio CODEC
|
| Required properties:
|
| - compatible: "everest,es8311"
| - reg: the I2C address of the device for I2C
| - spk-ctl-gpios: control spk enable/disable
| Optional properties:
|
| - clocks: The phandle of the master clock to the CODEC
| - clock-names: Should be "mclk"
| - adc-pga-gain: The PGA Gain of ADC, the value range is: 0(0dB) ~ 10(30dB),
| the step is 3dB.
| - adc-volume: The volume of ADC, range is: 0x00(-95dB) ~ 0xff(+32dB), 0dB is 0xbf.
| - dac-volume: The volume of DAC, range is: 0x00(-95dB) ~ 0xff(+32dB), 0dB is 0xbf.
| - aec-mode: The string of description AEC path between ADC and DAC, It should be:
| "adc left, adc right",
| "adc left, null right",
| "null left, adc right",
| "null left, null right",
| "dac left, adc right",
| "adc left, dac right",
| "dac left, dac right"
| And aec-mode is "adc left, adc right" by default, if the property
| is not specified.
| - delay-pa-drv-ms: The value of delay some milliseconds to start Power Amplifier.
| Example:
|
| es8311: es8311@18 {
| compatible = "everest,es8311";
| reg = <0x18>;
| clocks = <&cru MCLK_I2S0_TX_OUT2IO>;
| clock-names = "mclk";
| adc-pga-gain = <0>; /* 0dB */
| adc-volume = <0xbf>; /* 0dB */
| dac-volume = <0xbf>; /* 0dB */
| aec-mode = "dac left, adc right";
| spk-ctl-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
| };
|
|
