* Microsemi - vsc8531 Giga bit ethernet phy
|
|
Required properties:
|
- compatible : Should contain phy id as "ethernet-phy-idAAAA.BBBB"
|
The PHY device uses the binding described in
|
Documentation/devicetree/bindings/net/phy.txt
|
|
Optional properties:
|
- vsc8531,vddmac : The vddmac in mV. Allowed values is listed
|
in the first row of Table 1 (below).
|
This property is only used in combination
|
with the 'edge-slowdown' property.
|
Default value is 3300.
|
- vsc8531,edge-slowdown : % the edge should be slowed down relative to
|
the fastest possible edge time.
|
Edge rate sets the drive strength of the MAC
|
interface output signals. Changing the
|
drive strength will affect the edge rate of
|
the output signal. The goal of this setting
|
is to help reduce electrical emission (EMI)
|
by being able to reprogram drive strength
|
and in effect slow down the edge rate if
|
desired.
|
To adjust the edge-slowdown, the 'vddmac'
|
must be specified. Table 1 lists the
|
supported edge-slowdown values for a given
|
'vddmac'.
|
Default value is 0%.
|
Ref: Table:1 - Edge rate change (below).
|
- vsc8531,led-0-mode : LED mode. Specify how the LED[0] should behave.
|
Allowed values are define in
|
"include/dt-bindings/net/mscc-phy-vsc8531.h".
|
Default value is VSC8531_LINK_1000_ACTIVITY (1).
|
- vsc8531,led-1-mode : LED mode. Specify how the LED[1] should behave.
|
Allowed values are define in
|
"include/dt-bindings/net/mscc-phy-vsc8531.h".
|
Default value is VSC8531_LINK_100_ACTIVITY (2).
|
|
Table: 1 - Edge rate change
|
----------------------------------------------------------------|
|
| Edge Rate Change (VDDMAC) |
|
| |
|
| 3300 mV 2500 mV 1800 mV 1500 mV |
|
|---------------------------------------------------------------|
|
| 0% 0% 0% 0% |
|
| (Fastest) (recommended) (recommended) |
|
|---------------------------------------------------------------|
|
| 2% 3% 5% 6% |
|
|---------------------------------------------------------------|
|
| 4% 6% 9% 14% |
|
|---------------------------------------------------------------|
|
| 7% 10% 16% 21% |
|
|(recommended) (recommended) |
|
|---------------------------------------------------------------|
|
| 10% 14% 23% 29% |
|
|---------------------------------------------------------------|
|
| 17% 23% 35% 42% |
|
|---------------------------------------------------------------|
|
| 29% 37% 52% 58% |
|
|---------------------------------------------------------------|
|
| 53% 63% 76% 77% |
|
| (slowest) |
|
|---------------------------------------------------------------|
|
|
Example:
|
|
vsc8531_0: ethernet-phy@0 {
|
compatible = "ethernet-phy-id0007.0570";
|
vsc8531,vddmac = <3300>;
|
vsc8531,edge-slowdown = <7>;
|
vsc8531,led-0-mode = <LINK_1000_ACTIVITY>;
|
vsc8531,led-1-mode = <LINK_100_ACTIVITY>;
|
};
|
