hc
2023-02-18 a08c8b75ee83d7f62c9aefc23bfb42082aa4076c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
* Freescale VF610 PORT/GPIO module
 
The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
each, and each PORT module has its own interrupt.
 
Required properties for GPIO node:
- compatible : Should be "fsl,<soc>-gpio", below is supported list:
          "fsl,vf610-gpio"
          "fsl,imx7ulp-gpio"
- reg : The first reg tuple represents the PORT module, the second tuple
  the GPIO module.
- interrupts : Should be the port interrupt shared by all 32 pins.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells : Should be two. The first cell is the pin number and
  the second cell is used to specify the gpio polarity:
      0 = active high
      1 = active low
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
  The second cell bits[3:0] is used to specify trigger type and level flags:
      1 = low-to-high edge triggered.
      2 = high-to-low edge triggered.
      4 = active high level-sensitive.
      8 = active low level-sensitive.
 
Note: Each GPIO port should have an alias correctly numbered in "aliases"
node.
 
Examples:
 
aliases {
   gpio0 = &gpio1;
   gpio1 = &gpio2;
};
 
gpio1: gpio@40049000 {
   compatible = "fsl,vf610-gpio";
   reg = <0x40049000 0x1000 0x400ff000 0x40>;
   interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   gpio-ranges = <&iomuxc 0 0 32>;
};
 
gpio2: gpio@4004a000 {
   compatible = "fsl,vf610-gpio";
   reg = <0x4004a000 0x1000 0x400ff040 0x40>;
   interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   gpio-ranges = <&iomuxc 0 32 32>;
};