* Abilis TB10x GPIO controller
|
|
Required Properties:
|
- compatible: Should be "abilis,tb10x-gpio"
|
- reg: Address and length of the register set for the device
|
- gpio-controller: Marks the device node as a gpio controller.
|
- #gpio-cells: Should be <2>. The first cell is the pin number and the
|
second cell is used to specify optional parameters:
|
- bit 0 specifies polarity (0 for normal, 1 for inverted).
|
- abilis,ngpio: the number of GPIO pins this driver controls.
|
|
Optional Properties:
|
- interrupt-controller: Marks the device node as an interrupt controller.
|
- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
|
- interrupts: Defines the interrupt line connecting this GPIO controller to
|
its parent interrupt controller.
|
|
GPIO ranges are specified as described in
|
Documentation/devicetree/bindings/gpio/gpio.txt
|
|
Example:
|
|
gpioa: gpio@ff140000 {
|
compatible = "abilis,tb10x-gpio";
|
interrupt-controller;
|
#interrupt-cells = <1>;
|
interrupt-parent = <&tb10x_ictl>;
|
interrupts = <27 2>;
|
reg = <0xFF140000 0x1000>;
|
gpio-controller;
|
#gpio-cells = <2>;
|
abilis,ngpio = <3>;
|
gpio-ranges = <&iomux 0 0 0>;
|
gpio-ranges-group-names = "gpioa_pins";
|
};
|
