/* SPDX-License-Identifier: GPL-2.0 */
|
/*
|
* Misc system wide definitions
|
*
|
* Copyright (C) 1999-2019, Broadcom.
|
*
|
* Unless you and Broadcom execute a separate written software license
|
* agreement governing use of this software, this software is licensed to you
|
* under the terms of the GNU General Public License version 2 (the "GPL"),
|
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
|
* following added to such license:
|
*
|
* As a special exception, the copyright holders of this software give you
|
* permission to link this software with independent modules, and to copy and
|
* distribute the resulting executable under terms of your choice, provided that
|
* you also meet, for each linked independent module, the terms and conditions of
|
* the license of that module. An independent module is a module which is not
|
* derived from this software. The special exception does not apply to any
|
* modifications of the software.
|
*
|
* Notwithstanding the above, under no circumstances may you combine this
|
* software in any way with any other Broadcom software provided under a license
|
* other than the GPL, without Broadcom's express prior written consent.
|
*
|
*
|
* <<Broadcom-WL-IPTag/Open:>>
|
*
|
* $Id: bcmdefs.h 788740 2018-11-13 21:45:01Z $
|
*/
|
|
#ifndef _bcmdefs_h_
|
#define _bcmdefs_h_
|
|
/*
|
* One doesn't need to include this file explicitly, gets included automatically if
|
* typedefs.h is included.
|
*/
|
|
/* Use BCM_REFERENCE to suppress warnings about intentionally-unused function
|
* arguments or local variables.
|
*/
|
#define BCM_REFERENCE(data) ((void)(data))
|
|
/* Allow for suppressing unused variable warnings. */
|
#ifdef __GNUC__
|
#define UNUSED_VAR __attribute__ ((unused))
|
#else
|
#define UNUSED_VAR
|
#endif // endif
|
|
/* GNU GCC 4.6+ supports selectively turning off a warning.
|
* Define these diagnostic macros to help suppress cast-qual warning
|
* until all the work can be done to fix the casting issues.
|
*/
|
#if (defined(__GNUC__) && defined(STRICT_GCC_WARNINGS) && (__GNUC__ > 4 || (__GNUC__ == \
|
4 && __GNUC_MINOR__ >= 6)))
|
#define GCC_DIAGNOSTIC_PUSH_SUPPRESS_CAST() \
|
_Pragma("GCC diagnostic push") \
|
_Pragma("GCC diagnostic ignored \"-Wcast-qual\"")
|
#define GCC_DIAGNOSTIC_POP() \
|
_Pragma("GCC diagnostic pop")
|
#else
|
#define GCC_DIAGNOSTIC_PUSH_SUPPRESS_CAST()
|
#define GCC_DIAGNOSTIC_POP()
|
#endif /* Diagnostic macros not defined */
|
|
/* Support clang for MACOSX compiler */
|
#ifdef __clang__
|
#define CLANG_DIAGNOSTIC_PUSH_SUPPRESS_CAST() \
|
_Pragma("clang diagnostic push") \
|
_Pragma("clang diagnostic ignored \"-Wcast-qual\"")
|
#define CLANG_DIAGNOSTIC_PUSH_SUPPRESS_FORMAT() \
|
_Pragma("clang diagnostic push") \
|
_Pragma("clang diagnostic ignored \"-Wformat-nonliteral\"")
|
#define CLANG_DIAGNOSTIC_POP() \
|
_Pragma("clang diagnostic pop")
|
#else
|
#define CLANG_DIAGNOSTIC_PUSH_SUPPRESS_CAST()
|
#define CLANG_DIAGNOSTIC_PUSH_SUPPRESS_FORMAT()
|
#define CLANG_DIAGNOSTIC_POP()
|
#endif // endif
|
/* Compile-time assert can be used in place of ASSERT if the expression evaluates
|
* to a constant at compile time.
|
*/
|
#define STATIC_ASSERT(expr) { \
|
/* Make sure the expression is constant. */ \
|
typedef enum { _STATIC_ASSERT_NOT_CONSTANT = (expr) } _static_assert_e UNUSED_VAR; \
|
/* Make sure the expression is true. */ \
|
typedef char STATIC_ASSERT_FAIL[(expr) ? 1 : -1] UNUSED_VAR; \
|
}
|
|
/* Reclaiming text and data :
|
* The following macros specify special linker sections that can be reclaimed
|
* after a system is considered 'up'.
|
* BCMATTACHFN is also used for detach functions (it's not worth having a BCMDETACHFN,
|
* as in most cases, the attach function calls the detach function to clean up on error).
|
*/
|
#if defined(BCM_RECLAIM)
|
|
extern bool bcm_reclaimed;
|
extern bool bcm_attach_part_reclaimed;
|
extern bool bcm_preattach_part_reclaimed;
|
extern bool bcm_postattach_part_reclaimed;
|
|
#define RECLAIMED() (bcm_reclaimed)
|
#define ATTACH_PART_RECLAIMED() (bcm_attach_part_reclaimed)
|
#define PREATTACH_PART_RECLAIMED() (bcm_preattach_part_reclaimed)
|
#define POSTATTACH_PART_RECLAIMED() (bcm_postattach_part_reclaimed)
|
|
#if defined(BCM_RECLAIM_ATTACH_FN_DATA)
|
#define _data __attribute__ ((__section__ (".dataini2." #_data))) _data
|
#define _fn __attribute__ ((__section__ (".textini2." #_fn), noinline)) _fn
|
|
/* Relocate attach symbols to save-restore region to increase pre-reclaim heap size. */
|
#define BCM_SRM_ATTACH_DATA(_data) __attribute__ ((__section__ (".datasrm." #_data))) _data
|
#define BCM_SRM_ATTACH_FN(_fn) __attribute__ ((__section__ (".textsrm." #_fn), noinline)) _fn
|
|
#ifndef PREATTACH_NORECLAIM
|
#define BCMPREATTACHDATA(_data) __attribute__ ((__section__ (".dataini3." #_data))) _data
|
#define BCMPREATTACHFN(_fn) __attribute__ ((__section__ (".textini3." #_fn), noinline)) _fn
|
#else
|
#define BCMPREATTACHDATA(_data) __attribute__ ((__section__ (".dataini2." #_data))) _data
|
#define BCMPREATTACHFN(_fn) __attribute__ ((__section__ (".textini2." #_fn), noinline)) _fn
|
#endif /* PREATTACH_NORECLAIM */
|
#define BCMPOSTATTACHDATA(_data) __attribute__ ((__section__ (".dataini5." #_data))) _data
|
#define BCMPOSTATTACHFN(_fn) __attribute__ ((__section__ (".textini5." #_fn), noinline)) _fn
|
#else /* BCM_RECLAIM_ATTACH_FN_DATA */
|
#define _data _data
|
#define _fn _fn
|
#define BCMPREATTACHDATA(_data) _data
|
#define BCMPREATTACHFN(_fn) _fn
|
#define BCMPOSTATTACHDATA(_data) _data
|
#define BCMPOSTATTACHFN(_fn) _fn
|
#endif /* BCM_RECLAIM_ATTACH_FN_DATA */
|
|
#ifdef BCMDBG_SR
|
/*
|
* Don't reclaim so we can compare SR ASM
|
*/
|
#define BCMPREATTACHDATASR(_data) _data
|
#define BCMPREATTACHFNSR(_fn) _fn
|
#define BCMATTACHDATASR(_data) _data
|
#define BCMATTACHFNSR(_fn) _fn
|
#else
|
#define BCMPREATTACHDATASR(_data) BCMPREATTACHDATA(_data)
|
#define BCMPREATTACHFNSR(_fn) BCMPREATTACHFN(_fn)
|
#define BCMATTACHDATASR(_data) _data
|
#define BCMATTACHFNSR(_fn) _fn
|
#endif // endif
|
|
#if defined(BCM_RECLAIM_INIT_FN_DATA)
|
#define _data __attribute__ ((__section__ (".dataini1." #_data))) _data
|
#define _fn __attribute__ ((__section__ (".textini1." #_fn), noinline)) _fn
|
#define CONST
|
#else /* BCM_RECLAIM_INIT_FN_DATA */
|
#define _data _data
|
#define _fn _fn
|
#ifndef CONST
|
#define CONST const
|
#endif // endif
|
#endif /* BCM_RECLAIM_INIT_FN_DATA */
|
|
/* Non-manufacture or internal attach function/dat */
|
#define BCMNMIATTACHFN(_fn) _fn
|
#define BCMNMIATTACHDATA(_data) _data
|
|
#if defined(BCM_CISDUMP_NO_RECLAIM)
|
#define BCMCISDUMPATTACHFN(_fn) _fn
|
#define BCMCISDUMPATTACHDATA(_data) _data
|
#else
|
#define BCMCISDUMPATTACHFN(_fn) BCMNMIATTACHFN(_fn)
|
#define BCMCISDUMPATTACHDATA(_data) BCMNMIATTACHDATA(_data)
|
#endif // endif
|
|
/* SROM with OTP support */
|
#if defined(BCMOTPSROM)
|
#define BCMSROMATTACHFN(_fn) _fn
|
#define BCMSROMATTACHDATA(_data) _data
|
#else
|
#define BCMSROMATTACHFN(_fn) BCMNMIATTACHFN(_fn)
|
#define BCMSROMATTACHDATA(_data) BCMNMIATTACHFN(_data)
|
#endif /* BCMOTPSROM */
|
|
#if defined(BCM_CISDUMP_NO_RECLAIM)
|
#define BCMSROMCISDUMPATTACHFN(_fn) _fn
|
#define BCMSROMCISDUMPATTACHDATA(_data) _data
|
#else
|
#define BCMSROMCISDUMPATTACHFN(_fn) BCMSROMATTACHFN(_fn)
|
#define BCMSROMCISDUMPATTACHDATA(_data) BCMSROMATTACHDATA(_data)
|
#endif /* BCM_CISDUMP_NO_RECLAIM */
|
|
#ifdef BCMNODOWN
|
#define _fn _fn
|
#else
|
#define _fn _fn
|
#endif // endif
|
|
#else /* BCM_RECLAIM */
|
|
#define bcm_reclaimed (1)
|
#define bcm_attach_part_reclaimed (1)
|
#define bcm_preattach_part_reclaimed (1)
|
#define bcm_postattach_part_reclaimed (1)
|
#define _data _data
|
#define _fn _fn
|
#define BCM_SRM_ATTACH_DATA(_data) _data
|
#define BCM_SRM_ATTACH_FN(_fn) _fn
|
#define BCMPREATTACHDATA(_data) _data
|
#define BCMPREATTACHFN(_fn) _fn
|
#define BCMPOSTATTACHDATA(_data) _data
|
#define BCMPOSTATTACHFN(_fn) _fn
|
#define _data _data
|
#define _fn _fn
|
#define _fn _fn
|
#define BCMNMIATTACHFN(_fn) _fn
|
#define BCMNMIATTACHDATA(_data) _data
|
#define BCMSROMATTACHFN(_fn) _fn
|
#define BCMSROMATTACHDATA(_data) _data
|
#define BCMPREATTACHFNSR(_fn) _fn
|
#define BCMPREATTACHDATASR(_data) _data
|
#define BCMATTACHFNSR(_fn) _fn
|
#define BCMATTACHDATASR(_data) _data
|
#define BCMSROMATTACHFN(_fn) _fn
|
#define BCMSROMATTACHDATA(_data) _data
|
#define BCMCISDUMPATTACHFN(_fn) _fn
|
#define BCMCISDUMPATTACHDATA(_data) _data
|
#define BCMSROMCISDUMPATTACHFN(_fn) _fn
|
#define BCMSROMCISDUMPATTACHDATA(_data) _data
|
#define CONST const
|
|
#define RECLAIMED() (bcm_reclaimed)
|
#define ATTACH_PART_RECLAIMED() (bcm_attach_part_reclaimed)
|
#define PREATTACH_PART_RECLAIMED() (bcm_preattach_part_reclaimed)
|
#define POSTATTACH_PART_RECLAIMED() (bcm_postattach_part_reclaimed)
|
|
#endif /* BCM_RECLAIM */
|
|
#define BCMUCODEDATA(_data) _data
|
|
#if defined(BCM_DMA_CT) && !defined(BCM_DMA_CT_DISABLED)
|
#define BCMUCODEFN(_fn) _fn
|
#else
|
#define BCMUCODEFN(_fn) _fn
|
#endif /* BCM_DMA_CT */
|
|
#if !defined STB
|
#undef BCM47XX_CA9
|
#endif /* STB */
|
|
/* BCMFASTPATH Related Macro defines
|
*/
|
#ifndef BCMFASTPATH
|
#if defined(STB)
|
#define BCMFASTPATH __attribute__ ((__section__ (".text.fastpath")))
|
#define BCMFASTPATH_HOST __attribute__ ((__section__ (".text.fastpath_host")))
|
#else /* mips || BCM47XX_CA9 || STB */
|
#define BCMFASTPATH
|
#define BCMFASTPATH_HOST
|
#endif // endif
|
#endif /* BCMFASTPATH */
|
|
/* Use the BCMRAMFN() macro to tag functions in source that must be included in RAM (excluded from
|
* ROM). This should eliminate the need to manually specify these functions in the ROM config file.
|
* It should only be used in special cases where the function must be in RAM for *all* ROM-based
|
* chips.
|
*/
|
#define BCMRAMFN(_fn) _fn
|
|
/* Use BCMSPECSYM() macro to tag symbols going to a special output section in the binary. */
|
#define BCMSPECSYM(_sym) __attribute__ ((__section__ (".special." #_sym))) _sym
|
|
#define STATIC static
|
|
/* Bus types */
|
#define SI_BUS 0 /* SOC Interconnect */
|
#define PCI_BUS 1 /* PCI target */
|
#define PCMCIA_BUS 2 /* PCMCIA target */
|
#define SDIO_BUS 3 /* SDIO target */
|
#define JTAG_BUS 4 /* JTAG */
|
#define USB_BUS 5 /* USB (does not support R/W REG) */
|
#define SPI_BUS 6 /* gSPI target */
|
#define RPC_BUS 7 /* RPC target */
|
|
/* Allows size optimization for single-bus image */
|
#ifdef BCMBUSTYPE
|
#define BUSTYPE(bus) (BCMBUSTYPE)
|
#else
|
#define BUSTYPE(bus) (bus)
|
#endif // endif
|
|
#ifdef BCMBUSCORETYPE
|
#define BUSCORETYPE(ct) (BCMBUSCORETYPE)
|
#else
|
#define BUSCORETYPE(ct) (ct)
|
#endif // endif
|
|
/* Allows size optimization for single-backplane image */
|
#ifdef BCMCHIPTYPE
|
#define CHIPTYPE(bus) (BCMCHIPTYPE)
|
#else
|
#define CHIPTYPE(bus) (bus)
|
#endif // endif
|
|
/* Allows size optimization for SPROM support */
|
#if defined(BCMSPROMBUS)
|
#define SPROMBUS (BCMSPROMBUS)
|
#elif defined(SI_PCMCIA_SROM)
|
#define SPROMBUS (PCMCIA_BUS)
|
#else
|
#define SPROMBUS (PCI_BUS)
|
#endif // endif
|
|
/* Allows size optimization for single-chip image */
|
#ifdef BCMCHIPID
|
#define CHIPID(chip) (BCMCHIPID)
|
#else
|
#define CHIPID(chip) (chip)
|
#endif // endif
|
|
#ifdef BCMCHIPREV
|
#define CHIPREV(rev) (BCMCHIPREV)
|
#else
|
#define CHIPREV(rev) (rev)
|
#endif // endif
|
|
#ifdef BCMPCIEREV
|
#define PCIECOREREV(rev) (BCMPCIEREV)
|
#else
|
#define PCIECOREREV(rev) (rev)
|
#endif // endif
|
|
#ifdef BCMPMUREV
|
#define PMUREV(rev) (BCMPMUREV)
|
#else
|
#define PMUREV(rev) (rev)
|
#endif // endif
|
|
#ifdef BCMCCREV
|
#define CCREV(rev) (BCMCCREV)
|
#else
|
#define CCREV(rev) (rev)
|
#endif // endif
|
|
#ifdef BCMGCIREV
|
#define GCIREV(rev) (BCMGCIREV)
|
#else
|
#define GCIREV(rev) (rev)
|
#endif // endif
|
|
#ifdef BCMCR4REV
|
#define CR4REV (BCMCR4REV)
|
#endif // endif
|
|
/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
|
#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */
|
#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */
|
#define DMADDR_MASK_26 0xFC000000 /* Address maks for 26-bits */
|
#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */
|
|
#define DMADDRWIDTH_26 26 /* 26-bit addressing capability */
|
#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */
|
#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */
|
#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */
|
#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */
|
|
typedef struct {
|
uint32 loaddr;
|
uint32 hiaddr;
|
} dma64addr_t;
|
|
#define PHYSADDR64HI(_pa) ((_pa).hiaddr)
|
#define PHYSADDR64HISET(_pa, _val) \
|
do { \
|
(_pa).hiaddr = (_val); \
|
} while (0)
|
#define PHYSADDR64LO(_pa) ((_pa).loaddr)
|
#define PHYSADDR64LOSET(_pa, _val) \
|
do { \
|
(_pa).loaddr = (_val); \
|
} while (0)
|
|
#ifdef BCMDMA64OSL
|
typedef dma64addr_t dmaaddr_t;
|
#define PHYSADDRHI(_pa) PHYSADDR64HI(_pa)
|
#define PHYSADDRHISET(_pa, _val) PHYSADDR64HISET(_pa, _val)
|
#define PHYSADDRLO(_pa) PHYSADDR64LO(_pa)
|
#define PHYSADDRLOSET(_pa, _val) PHYSADDR64LOSET(_pa, _val)
|
#define PHYSADDRTOULONG(_pa, _ulong) \
|
do { \
|
_ulong = ((unsigned long long)(_pa).hiaddr << 32) | ((_pa).loaddr); \
|
} while (0)
|
|
#else
|
typedef unsigned long dmaaddr_t;
|
#define PHYSADDRHI(_pa) (0)
|
#define PHYSADDRHISET(_pa, _val)
|
#define PHYSADDRLO(_pa) ((_pa))
|
#define PHYSADDRLOSET(_pa, _val) \
|
do { \
|
(_pa) = (_val); \
|
} while (0)
|
#endif /* BCMDMA64OSL */
|
#define PHYSADDRISZERO(_pa) (PHYSADDRLO(_pa) == 0 && PHYSADDRHI(_pa) == 0)
|
|
/* One physical DMA segment */
|
typedef struct {
|
dmaaddr_t addr;
|
uint32 length;
|
} hnddma_seg_t;
|
|
#define MAX_DMA_SEGS 8
|
|
typedef struct {
|
void *oshdmah; /* Opaque handle for OSL to store its information */
|
uint origsize; /* Size of the virtual packet */
|
uint nsegs;
|
hnddma_seg_t segs[MAX_DMA_SEGS];
|
} hnddma_seg_map_t;
|
|
/* packet headroom necessary to accommodate the largest header in the system, (i.e TXOFF).
|
* By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL.
|
* There is a compile time check in wlc.c which ensure that this value is at least as big
|
* as TXOFF. This value is used in dma_rxfill (hnddma.c).
|
*/
|
|
#if defined(BCM_RPC_NOCOPY) || defined(BCM_RCP_TXNOCOPY)
|
/* add 40 bytes to allow for extra RPC header and info */
|
#define BCMEXTRAHDROOM 260
|
#else /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */
|
#if defined(STB)
|
#define BCMEXTRAHDROOM 224
|
#else
|
#define BCMEXTRAHDROOM 204
|
#endif // endif
|
#endif /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */
|
|
/* Packet alignment for most efficient SDIO (can change based on platform) */
|
#ifndef SDALIGN
|
#define SDALIGN 32
|
#endif // endif
|
|
/* Headroom required for dongle-to-host communication. Packets allocated
|
* locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
|
* leave this much room in front for low-level message headers which may
|
* be needed to get across the dongle bus to the host. (These messages
|
* don't go over the network, so room for the full WL header above would
|
* be a waste.).
|
*/
|
#define BCMDONGLEHDRSZ 12
|
#define BCMDONGLEPADSZ 16
|
|
#define BCMDONGLEOVERHEAD (BCMDONGLEHDRSZ + BCMDONGLEPADSZ)
|
|
#if defined(NO_BCMDBG_ASSERT)
|
# undef BCMDBG_ASSERT
|
# undef BCMASSERT_LOG
|
#endif // endif
|
|
#if defined(BCMASSERT_LOG)
|
#define BCMASSERT_SUPPORT
|
#endif // endif
|
|
/* Macros for doing definition and get/set of bitfields
|
* Usage example, e.g. a three-bit field (bits 4-6):
|
* #define <NAME>_M BITFIELD_MASK(3)
|
* #define <NAME>_S 4
|
* ...
|
* regval = R_REG(osh, ®s->regfoo);
|
* field = GFIELD(regval, <NAME>);
|
* regval = SFIELD(regval, <NAME>, 1);
|
* W_REG(osh, ®s->regfoo, regval);
|
*/
|
#define BITFIELD_MASK(width) \
|
(((unsigned)1 << (width)) - 1)
|
#define GFIELD(val, field) \
|
(((val) >> field ## _S) & field ## _M)
|
#define SFIELD(val, field, bits) \
|
(((val) & (~(field ## _M << field ## _S))) | \
|
((unsigned)(bits) << field ## _S))
|
|
/* define BCMSMALL to remove misc features for memory-constrained environments */
|
#ifdef BCMSMALL
|
#undef BCMSPACE
|
#define bcmspace FALSE /* if (bcmspace) code is discarded */
|
#else
|
#define BCMSPACE
|
#define bcmspace TRUE /* if (bcmspace) code is retained */
|
#endif // endif
|
|
/* Max. nvram variable table size */
|
#ifndef MAXSZ_NVRAM_VARS
|
#ifdef LARGE_NVRAM_MAXSZ
|
#define MAXSZ_NVRAM_VARS (LARGE_NVRAM_MAXSZ * 2)
|
#else
|
#define LARGE_NVRAM_MAXSZ 8192
|
#define MAXSZ_NVRAM_VARS (LARGE_NVRAM_MAXSZ * 2)
|
#endif /* LARGE_NVRAM_MAXSZ */
|
#endif /* !MAXSZ_NVRAM_VARS */
|
|
/* ROM_ENAB_RUNTIME_CHECK may be set based upon the #define below (for ROM builds). It may also
|
* be defined via makefiles (e.g. ROM auto abandon unoptimized compiles).
|
*/
|
|
#ifdef BCMLFRAG /* BCMLFRAG support enab macros */
|
extern bool _bcmlfrag;
|
#if defined(ROM_ENAB_RUNTIME_CHECK) || !defined(DONGLEBUILD)
|
#define BCMLFRAG_ENAB() (_bcmlfrag)
|
#elif defined(BCMLFRAG_DISABLED)
|
#define BCMLFRAG_ENAB() (0)
|
#else
|
#define BCMLFRAG_ENAB() (1)
|
#endif
|
#else
|
#define BCMLFRAG_ENAB() (0)
|
#endif /* BCMLFRAG_ENAB */
|
|
#ifdef BCMPCIEDEV /* BCMPCIEDEV support enab macros */
|
extern bool _pciedevenab;
|
#if defined(ROM_ENAB_RUNTIME_CHECK)
|
#define BCMPCIEDEV_ENAB() (_pciedevenab)
|
#elif defined(BCMPCIEDEV_ENABLED)
|
#define BCMPCIEDEV_ENAB() 1
|
#else
|
#define BCMPCIEDEV_ENAB() 0
|
#endif
|
#else
|
#define BCMPCIEDEV_ENAB() 0
|
#endif /* BCMPCIEDEV */
|
|
#ifdef BCMRESVFRAGPOOL /* BCMRESVFRAGPOOL support enab macros */
|
extern bool _resvfragpool_enab;
|
#if defined(ROM_ENAB_RUNTIME_CHECK) || !defined(DONGLEBUILD)
|
#define BCMRESVFRAGPOOL_ENAB() (_resvfragpool_enab)
|
#elif defined(BCMRESVFRAGPOOL_ENABLED)
|
#define BCMRESVFRAGPOOL_ENAB() 1
|
#else
|
#define BCMRESVFRAGPOOL_ENAB() 0
|
#endif
|
#else
|
#define BCMRESVFRAGPOOL_ENAB() 0
|
#endif /* BCMPCIEDEV */
|
|
#define BCMSDIODEV_ENAB() 0
|
|
/* Max size for reclaimable NVRAM array */
|
#ifdef DL_NVRAM
|
#define NVRAM_ARRAY_MAXSIZE DL_NVRAM
|
#else
|
#define NVRAM_ARRAY_MAXSIZE MAXSZ_NVRAM_VARS
|
#endif /* DL_NVRAM */
|
|
extern uint32 gFWID;
|
|
#ifdef BCMFRWDPOOLREORG /* BCMFRWDPOOLREORG support enab macros */
|
extern bool _bcmfrwdpoolreorg;
|
#if defined(ROM_ENAB_RUNTIME_CHECK) || !defined(DONGLEBUILD)
|
#define BCMFRWDPOOLREORG_ENAB() (_bcmfrwdpoolreorg)
|
#elif defined(BCMFRWDPOOLREORG_DISABLED)
|
#define BCMFRWDPOOLREORG_ENAB() (0)
|
#else
|
#define BCMFRWDPOOLREORG_ENAB() (1)
|
#endif
|
#else
|
#define BCMFRWDPOOLREORG_ENAB() (0)
|
#endif /* BCMFRWDPOOLREORG */
|
|
#ifdef BCMPOOLRECLAIM /* BCMPOOLRECLAIM support enab macros */
|
extern bool _bcmpoolreclaim;
|
#if defined(ROM_ENAB_RUNTIME_CHECK) || !defined(DONGLEBUILD)
|
#define BCMPOOLRECLAIM_ENAB() (_bcmpoolreclaim)
|
#elif defined(BCMPOOLRECLAIM_DISABLED)
|
#define BCMPOOLRECLAIM_ENAB() (0)
|
#else
|
#define BCMPOOLRECLAIM_ENAB() (1)
|
#endif
|
#else
|
#define BCMPOOLRECLAIM_ENAB() (0)
|
#endif /* BCMPOOLRECLAIM */
|
|
/* Chip related low power flags (lpflags) */
|
|
#ifndef PAD
|
#define _PADLINE(line) pad ## line
|
#define _XSTR(line) _PADLINE(line)
|
#define PAD _XSTR(__LINE__)
|
#endif // endif
|
|
#ifndef FRAG_HEADROOM
|
#define FRAG_HEADROOM 224 /* In absence of SFD, use default headroom of 224 */
|
#endif // endif
|
|
#define MODULE_DETACH(var, detach_func)\
|
if (var) { \
|
detach_func(var); \
|
(var) = NULL; \
|
}
|
#define MODULE_DETACH_2(var1, var2, detach_func) detach_func(var1, var2)
|
#define MODULE_DETACH_TYPECASTED(var, detach_func) detach_func(var)
|
|
/* When building ROML image use runtime conditional to cause the compiler
|
* to compile everything but not to complain "defined but not used"
|
* as #ifdef would cause at the callsites.
|
* In the end functions called under if (0) {} will not be linked
|
* into the final binary if they're not called from other places either.
|
*/
|
#define BCM_ATTACH_REF_DECL()
|
#define BCM_ATTACH_REF() (1)
|
|
/* Const in ROM else normal data in RAM */
|
#if defined(ROM_ENAB_RUNTIME_CHECK)
|
#define ROMCONST CONST
|
#else
|
#define ROMCONST
|
#endif // endif
|
|
#endif /* _bcmdefs_h_ */
|
