Bindings for Analog Devices ADGS1408/1409 8:1/Dual 4:1 Mux
|
|
Required properties:
|
- compatible : Should be one of
|
* "adi,adgs1408"
|
* "adi,adgs1409"
|
* Standard mux-controller bindings as described in mux-controller.txt
|
|
Optional properties for ADGS1408/1409:
|
- gpio-controller : if present, #gpio-cells is required.
|
- #gpio-cells : should be <2>
|
- First cell is the GPO line number, i.e. 0 to 3
|
for ADGS1408 and 0 to 4 for ADGS1409
|
- Second cell is used to specify active high (0)
|
or active low (1)
|
|
Optional properties:
|
- idle-state : if present, the state that the mux controller will have
|
when idle. The special state MUX_IDLE_AS_IS is the default and
|
MUX_IDLE_DISCONNECT is also supported.
|
|
States 0 through 7 correspond to signals S1 through S8 in the datasheet.
|
For ADGS1409 only states 0 to 3 are available.
|
|
Example:
|
|
/*
|
* One mux controller.
|
* Mux state set to idle as is (no idle-state declared)
|
*/
|
&spi0 {
|
mux: mux-controller@0 {
|
compatible = "adi,adgs1408";
|
reg = <0>;
|
spi-max-frequency = <1000000>;
|
#mux-control-cells = <0>;
|
};
|
}
|
|
adc-mux {
|
compatible = "io-channel-mux";
|
io-channels = <&adc 1>;
|
io-channel-names = "parent";
|
mux-controls = <&mux>;
|
|
channels = "out_a0", "out_a1", "test0", "test1",
|
"out_b0", "out_b1", "testb0", "testb1";
|
};
|
