What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: The mouse can store 5 profiles which can be switched by the
|
press of a button. actual_profile holds number of actual profile.
|
This value is persistent, so its value determines the profile
|
that's active when the mouse is powered on next time.
|
When written, the mouse activates the set profile immediately.
|
The data has to be 3 bytes long.
|
The mouse will reject invalid data.
|
Users: http://roccat.sourceforge.net
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: When written, this file lets one select which data from which
|
profile will be read next. The data has to be 3 bytes long.
|
This file is writeonly.
|
Users: http://roccat.sourceforge.net
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: When read, this file returns general data like firmware version.
|
When written, the device can be reset.
|
The data is 6 bytes long.
|
Users: http://roccat.sourceforge.net
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: The mouse can store a macro with max 500 key/button strokes
|
internally.
|
When written, this file lets one set the sequence for a specific
|
button for a specific profile. Button and profile numbers are
|
included in written data. The data has to be 2082 bytes long.
|
This file is writeonly.
|
Users: http://roccat.sourceforge.net
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: The mouse can store 5 profiles which can be switched by the
|
press of a button. A profile is split in settings and buttons.
|
profile_buttons holds information about button layout.
|
When written, this file lets one write the respective profile
|
buttons back to the mouse. The data has to be 59 bytes long.
|
The mouse will reject invalid data.
|
Which profile to write is determined by the profile number
|
contained in the data.
|
Before reading this file, control has to be written to select
|
which profile to read.
|
Users: http://roccat.sourceforge.net
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: The mouse can store 5 profiles which can be switched by the
|
press of a button. A profile is split in settings and buttons.
|
profile_settings holds information like resolution, sensitivity
|
and light effects.
|
When written, this file lets one write the respective profile
|
settings back to the mouse. The data has to be 31 bytes long.
|
The mouse will reject invalid data.
|
Which profile to write is determined by the profile number
|
contained in the data.
|
Before reading this file, control has to be written to select
|
which profile to read.
|
Users: http://roccat.sourceforge.net
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: The mouse has a tracking- and a distance-control-unit. These
|
can be activated/deactivated and the lift-off distance can be
|
set. The data has to be 6 bytes long.
|
This file is writeonly.
|
Users: http://roccat.sourceforge.net
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: Used to active some easy* functions of the mouse from outside.
|
The data has to be 16 bytes long.
|
This file is writeonly.
|
Users: http://roccat.sourceforge.net
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: When written a calibration process for the tracking control unit
|
can be initiated/cancelled. Also lets one read/write sensor
|
registers.
|
The data has to be 4 bytes long.
|
Users: http://roccat.sourceforge.net
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image
|
Date: December 2012
|
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
|
Description: When read the mouse returns a 30x30 pixel image of the
|
sampled underground. This works only in the course of a
|
calibration process initiated with tcu.
|
The returned data is 1028 bytes in size.
|
This file is readonly.
|
Users: http://roccat.sourceforge.net
|
