/*
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#include <common.h>
|
#include <mmc.h>
|
#include <malloc.h>
|
|
/*
|
* The environment variables are written to just after the u-boot image
|
* on SDCard, so we must read the MBR to get the start address and code
|
* length of the u-boot image, then calculate the address of the env.
|
*/
|
#define ESDHC_BOOT_IMAGE_SIZE 0x48
|
#define ESDHC_BOOT_IMAGE_ADDR 0x50
|
|
#define ESDHC_DEFAULT_ENVADDR 0x400
|
|
int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr)
|
{
|
u8 *tmp_buf;
|
u32 blklen, code_offset, code_len, n;
|
|
blklen = mmc->read_bl_len;
|
tmp_buf = malloc(blklen);
|
if (!tmp_buf)
|
return 1;
|
|
/* read out the first block, get the config data information */
|
n = mmc->block_dev.block_read(&mmc->block_dev, 0, 1, tmp_buf);
|
if (!n) {
|
free(tmp_buf);
|
return 1;
|
}
|
|
/* Get the Source Address, from offset 0x50 */
|
code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR);
|
|
/* Get the code size from offset 0x48 */
|
code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE);
|
|
#ifdef CONFIG_ESDHC_HC_BLK_ADDR
|
/*
|
* On soc BSC9131, BSC9132:
|
* In High Capacity SD Cards (> 2 GBytes), the 32-bit source address and
|
* code length of these soc specify the memory address in block address
|
* format. Block length is fixed to 512 bytes as per the SD High
|
* Capacity specification.
|
*/
|
u64 tmp;
|
|
if (mmc->high_capacity) {
|
tmp = (u64)code_offset * blklen;
|
tmp += code_len * blklen;
|
} else
|
tmp = code_offset + code_len;
|
|
if ((tmp + CONFIG_ENV_SIZE > mmc->capacity) ||
|
(tmp > 0xFFFFFFFFU))
|
*env_addr = ESDHC_DEFAULT_ENVADDR;
|
else
|
*env_addr = tmp;
|
|
free(tmp_buf);
|
|
return 0;
|
#endif
|
|
*env_addr = code_offset + code_len;
|
|
free(tmp_buf);
|
|
return 0;
|
}
|
