|
hw_mac = MAC_ADDR
|
hw_mac_2 = MAC2ADDR
|
|
############################################################
|
# MAC address
|
#
|
# Priority 1. From wifi.cfg [ hw_mac & hw_mac_2 ]
|
#
|
# Priority 2. From e-fuse[ON/OFF switch by wifi.cfg]
|
#
|
# Priority 3. From insert module parameter
|
#
|
# Priority 4. From external file path
|
# path only support some special charater "_" ":" "/" "." "-"
|
#
|
# Priority 5. Default[Software mode]
|
#
|
# 0. => 00:33:33:33:33:33
|
# 1. => Always random
|
# 2. => First random and write to file[Default path mac_output_path]
|
#
|
############################################################
|
#ignore_efuse_mac = 1
|
#mac_address_path = /xxxx/xxxx
|
#mac_address_mode = 0
|
#mac_output_path = /data/wifimac
|
|
##################################################
|
# Firmware setting
|
# Priority.1 insmod parameter "cfgfirmwarepath"
|
# Priority.2 firmware_path
|
# Priority.3 default firmware
|
##################################################
|
#firmware_path = /lib/firmware/
|
|
##################################################
|
# Hardware setting
|
#
|
#volt regulator(DCDC-0 LDO-1)
|
#
|
##################################################
|
xtal_clock = 26
|
volt_regulator = 1
|
|
##################################################
|
# Default channel after wifi on
|
# value range: [1 ~ 14]
|
##################################################
|
def_chan = 6
|
|
# Hardware Capability Settings:
|
##################################################
|
hw_cap_ht = on
|
hw_cap_gf = off
|
hw_cap_2ghz = on
|
hw_cap_5ghz = off
|
hw_cap_security = on
|
hw_cap_sgi_20 = on
|
hw_cap_sgi_40 = off
|
hw_cap_ap = on
|
hw_cap_p2p = on
|
hw_cap_ampdu_rx = on
|
hw_cap_ampdu_tx = on
|
use_wpa2_only = 1
|
|
##################################################
|
# TX power level setting [0-14]
|
# The larger the number the smaller the TX power
|
# 0 - The maximum power
|
# 1 level = -0.5db
|
##################################################
|
wifi_tx_gain_level_b = 6
|
wifi_tx_gain_level_gn = 4
|
