/* SPDX-License-Identifier: GPL-2.0 */
|
/*
|
* Custom OID/ioctl definitions for
|
* Broadcom 802.11abg Networking Device Driver
|
*
|
* Definitions subject to change without notice.
|
*
|
* Copyright (C) 1999-2017, Broadcom Corporation
|
*
|
* Unless you and Broadcom execute a separate written software license
|
* agreement governing use of this software, this software is licensed to you
|
* under the terms of the GNU General Public License version 2 (the "GPL"),
|
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
|
* following added to such license:
|
*
|
* As a special exception, the copyright holders of this software give you
|
* permission to link this software with independent modules, and to copy and
|
* distribute the resulting executable under terms of your choice, provided that
|
* you also meet, for each linked independent module, the terms and conditions of
|
* the license of that module. An independent module is a module which is not
|
* derived from this software. The special exception does not apply to any
|
* modifications of the software.
|
*
|
* Notwithstanding the above, under no circumstances may you combine this
|
* software in any way with any other Broadcom software provided under a license
|
* other than the GPL, without Broadcom's express prior written consent.
|
*
|
*
|
* <<Broadcom-WL-IPTag/Open:>>
|
*
|
* $Id: wlioctl_defs.h 677667 2017-01-04 07:43:05Z $
|
*/
|
|
|
#ifndef wlioctl_defs_h
|
#define wlioctl_defs_h
|
|
|
|
|
/* All builds use the new 11ac ratespec/chanspec */
|
#undef D11AC_IOTYPES
|
#define D11AC_IOTYPES
|
|
#ifndef USE_NEW_RSPEC_DEFS
|
/* WL_RSPEC defines for rate information */
|
#define WL_RSPEC_RATE_MASK 0x000000FF /* rate or HT MCS value */
|
#define WL_RSPEC_HE_MCS_MASK 0x0000000F /* HE MCS value */
|
#define WL_RSPEC_HE_NSS_MASK 0x000000F0 /* HE Nss value */
|
#define WL_RSPEC_HE_NSS_SHIFT 4 /* HE Nss value shift */
|
#define WL_RSPEC_VHT_MCS_MASK 0x0000000F /* VHT MCS value */
|
#define WL_RSPEC_VHT_NSS_MASK 0x000000F0 /* VHT Nss value */
|
#define WL_RSPEC_VHT_NSS_SHIFT 4 /* VHT Nss value shift */
|
#define WL_RSPEC_TXEXP_MASK 0x00000300
|
#define WL_RSPEC_TXEXP_SHIFT 8
|
#define WL_RSPEC_BW_MASK 0x00070000 /* bandwidth mask */
|
#define WL_RSPEC_BW_SHIFT 16 /* bandwidth shift */
|
#define WL_RSPEC_STBC 0x00100000 /* STBC encoding, Nsts = 2 x Nss */
|
#define WL_RSPEC_TXBF 0x00200000 /* bit indicates TXBF mode */
|
#define WL_RSPEC_LDPC 0x00400000 /* bit indicates adv coding in use */
|
#define WL_RSPEC_SGI 0x00800000 /* Short GI mode */
|
#define WL_RSPEC_ENCODING_MASK 0x03000000 /* Encoding of Rate/MCS field */
|
#define WL_RSPEC_OVERRIDE_RATE 0x40000000 /* bit indicate to override mcs only */
|
#define WL_RSPEC_OVERRIDE_MODE 0x80000000 /* bit indicates override rate & mode */
|
|
/* WL_RSPEC_ENCODING field defs */
|
#define WL_RSPEC_ENCODE_RATE 0x00000000 /* Legacy rate is stored in RSPEC_RATE_MASK */
|
#define WL_RSPEC_ENCODE_HT 0x01000000 /* HT MCS is stored in RSPEC_RATE_MASK */
|
#define WL_RSPEC_ENCODE_VHT 0x02000000 /* VHT MCS and Nss is stored in RSPEC_RATE_MASK */
|
#define WL_RSPEC_ENCODE_HE 0x03000000 /* HE MCS and Nss is stored in RSPEC_RATE_MASK */
|
|
/* WL_RSPEC_BW field defs */
|
#define WL_RSPEC_BW_UNSPECIFIED 0
|
#define WL_RSPEC_BW_20MHZ 0x00010000
|
#define WL_RSPEC_BW_40MHZ 0x00020000
|
#define WL_RSPEC_BW_80MHZ 0x00030000
|
#define WL_RSPEC_BW_160MHZ 0x00040000
|
#define WL_RSPEC_BW_10MHZ 0x00050000
|
#define WL_RSPEC_BW_5MHZ 0x00060000
|
#define WL_RSPEC_BW_2P5MHZ 0x00070000
|
|
#define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */
|
|
#endif /* !USE_NEW_RSPEC_DEFS */
|
|
/* Legacy defines for the nrate iovar */
|
#define OLD_NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */
|
#define OLD_NRATE_RATE_MASK 0x0000007f /* rate/mcs value */
|
#define OLD_NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */
|
#define OLD_NRATE_STF_SHIFT 8 /* stf mode shift */
|
#define OLD_NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */
|
#define OLD_NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */
|
#define OLD_NRATE_SGI 0x00800000 /* sgi mode */
|
#define OLD_NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */
|
|
#define OLD_NRATE_STF_SISO 0 /* stf mode SISO */
|
#define OLD_NRATE_STF_CDD 1 /* stf mode CDD */
|
#define OLD_NRATE_STF_STBC 2 /* stf mode STBC */
|
#define OLD_NRATE_STF_SDM 3 /* stf mode SDM */
|
|
#define WLC_11N_N_PROP_MCS 6
|
#define WLC_11N_FIRST_PROP_MCS 87
|
#define WLC_11N_LAST_PROP_MCS 102
|
|
#define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */
|
#define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */
|
|
#define IBSS_MED 15 /* Mediom in-bss congestion percentage */
|
#define IBSS_HI 25 /* Hi in-bss congestion percentage */
|
#define OBSS_MED 12
|
#define OBSS_HI 25
|
#define INTERFER_MED 5
|
#define INTERFER_HI 10
|
|
#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */
|
#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */
|
#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */
|
#define CCA_FLAGS_PREFER_1_6_11 0x10
|
#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */
|
|
#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */
|
#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */
|
#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */
|
#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */
|
#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */
|
|
#define WL_STA_AID(a) ((a) &~ 0xc000)
|
|
/* Flags for sta_info_t indicating properties of STA */
|
#define WL_STA_BRCM 0x00000001 /* Running a Broadcom driver */
|
#define WL_STA_WME 0x00000002 /* WMM association */
|
#define WL_STA_NONERP 0x00000004 /* No ERP */
|
#define WL_STA_AUTHE 0x00000008 /* Authenticated */
|
#define WL_STA_ASSOC 0x00000010 /* Associated */
|
#define WL_STA_AUTHO 0x00000020 /* Authorized */
|
#define WL_STA_WDS 0x00000040 /* Wireless Distribution System */
|
#define WL_STA_WDS_LINKUP 0x00000080 /* WDS traffic/probes flowing properly */
|
#define WL_STA_PS 0x00000100 /* STA is in power save mode from AP's viewpoint */
|
#define WL_STA_APSD_BE 0x00000200 /* APSD delv/trigger for AC_BE is default enabled */
|
#define WL_STA_APSD_BK 0x00000400 /* APSD delv/trigger for AC_BK is default enabled */
|
#define WL_STA_APSD_VI 0x00000800 /* APSD delv/trigger for AC_VI is default enabled */
|
#define WL_STA_APSD_VO 0x00001000 /* APSD delv/trigger for AC_VO is default enabled */
|
#define WL_STA_N_CAP 0x00002000 /* STA 802.11n capable */
|
#define WL_STA_SCBSTATS 0x00004000 /* Per STA debug stats */
|
#define WL_STA_AMPDU_CAP 0x00008000 /* STA AMPDU capable */
|
#define WL_STA_AMSDU_CAP 0x00010000 /* STA AMSDU capable */
|
#define WL_STA_MIMO_PS 0x00020000 /* mimo ps mode is enabled */
|
#define WL_STA_MIMO_RTS 0x00040000 /* send rts in mimo ps mode */
|
#define WL_STA_RIFS_CAP 0x00080000 /* rifs enabled */
|
#define WL_STA_VHT_CAP 0x00100000 /* STA VHT(11ac) capable */
|
#define WL_STA_WPS 0x00200000 /* WPS state */
|
#define WL_STA_DWDS_CAP 0x01000000 /* DWDS CAP */
|
#define WL_STA_DWDS 0x02000000 /* DWDS active */
|
#define WL_WDS_LINKUP WL_STA_WDS_LINKUP /* deprecated */
|
|
/* STA HT cap fields */
|
#define WL_STA_CAP_LDPC_CODING 0x0001 /* Support for rx of LDPC coded pkts */
|
#define WL_STA_CAP_40MHZ 0x0002 /* FALSE:20Mhz, TRUE:20/40MHZ supported */
|
#define WL_STA_CAP_MIMO_PS_MASK 0x000C /* Mimo PS mask */
|
#define WL_STA_CAP_MIMO_PS_SHIFT 0x0002 /* Mimo PS shift */
|
#define WL_STA_CAP_MIMO_PS_OFF 0x0003 /* Mimo PS, no restriction */
|
#define WL_STA_CAP_MIMO_PS_RTS 0x0001 /* Mimo PS, send RTS/CTS around MIMO frames */
|
#define WL_STA_CAP_MIMO_PS_ON 0x0000 /* Mimo PS, MIMO disallowed */
|
#define WL_STA_CAP_GF 0x0010 /* Greenfield preamble support */
|
#define WL_STA_CAP_SHORT_GI_20 0x0020 /* 20MHZ short guard interval support */
|
#define WL_STA_CAP_SHORT_GI_40 0x0040 /* 40Mhz short guard interval support */
|
#define WL_STA_CAP_TX_STBC 0x0080 /* Tx STBC support */
|
#define WL_STA_CAP_RX_STBC_MASK 0x0300 /* Rx STBC mask */
|
#define WL_STA_CAP_RX_STBC_SHIFT 8 /* Rx STBC shift */
|
#define WL_STA_CAP_DELAYED_BA 0x0400 /* delayed BA support */
|
#define WL_STA_CAP_MAX_AMSDU 0x0800 /* Max AMSDU size in bytes , 0=3839, 1=7935 */
|
#define WL_STA_CAP_DSSS_CCK 0x1000 /* DSSS/CCK supported by the BSS */
|
#define WL_STA_CAP_PSMP 0x2000 /* Power Save Multi Poll support */
|
#define WL_STA_CAP_40MHZ_INTOLERANT 0x4000 /* 40MHz Intolerant */
|
#define WL_STA_CAP_LSIG_TXOP 0x8000 /* L-SIG TXOP protection support */
|
|
#define WL_STA_CAP_RX_STBC_NO 0x0 /* no rx STBC support */
|
#define WL_STA_CAP_RX_STBC_ONE_STREAM 0x1 /* rx STBC support of 1 spatial stream */
|
#define WL_STA_CAP_RX_STBC_TWO_STREAM 0x2 /* rx STBC support of 1-2 spatial streams */
|
#define WL_STA_CAP_RX_STBC_THREE_STREAM 0x3 /* rx STBC support of 1-3 spatial streams */
|
|
/* scb vht flags */
|
#define WL_STA_VHT_LDPCCAP 0x0001
|
#define WL_STA_SGI80 0x0002
|
#define WL_STA_SGI160 0x0004
|
#define WL_STA_VHT_TX_STBCCAP 0x0008
|
#define WL_STA_VHT_RX_STBCCAP 0x0010
|
#define WL_STA_SU_BEAMFORMER 0x0020
|
#define WL_STA_SU_BEAMFORMEE 0x0040
|
#define WL_STA_MU_BEAMFORMER 0x0080
|
#define WL_STA_MU_BEAMFORMEE 0x0100
|
#define WL_STA_VHT_TXOP_PS 0x0200
|
#define WL_STA_HTC_VHT_CAP 0x0400
|
|
/* Values for TX Filter override mode */
|
#define WLC_TXFILTER_OVERRIDE_DISABLED 0
|
#define WLC_TXFILTER_OVERRIDE_ENABLED 1
|
|
#define WL_IOCTL_ACTION_GET 0x0
|
#define WL_IOCTL_ACTION_SET 0x1
|
#define WL_IOCTL_ACTION_OVL_IDX_MASK 0x1e
|
#define WL_IOCTL_ACTION_OVL_RSV 0x20
|
#define WL_IOCTL_ACTION_OVL 0x40
|
#define WL_IOCTL_ACTION_MASK 0x7e
|
#define WL_IOCTL_ACTION_OVL_SHIFT 1
|
|
/* For WLC_SET_INFRA ioctl & infra_configuration iovar SET/GET operations */
|
#define WL_BSSTYPE_INDEP 0
|
#define WL_BSSTYPE_INFRA 1
|
#define WL_BSSTYPE_ANY 2 /* deprecated */
|
#define WL_BSSTYPE_MESH 3
|
/* Bitmask for scan_type */
|
#define WL_SCANFLAGS_PASSIVE 0x01 /* force passive scan */
|
#define WL_SCANFLAGS_RESERVED 0x02 /* Reserved */
|
#define WL_SCANFLAGS_PROHIBITED 0x04 /* allow scanning prohibited channels */
|
#define WL_SCANFLAGS_OFFCHAN 0x08 /* allow scanning/reporting off-channel APs */
|
#define WL_SCANFLAGS_HOTSPOT 0x10 /* automatic ANQP to hotspot APs */
|
#define WL_SCANFLAGS_SWTCHAN 0x20 /* Force channel switch for differerent bandwidth */
|
#define WL_SCANFLAGS_FORCE_PARALLEL 0x40 /* Force parallel scan even when actcb_fn_t is on.
|
* by default parallel scan will be disabled if actcb_fn_t
|
* is provided.
|
*/
|
#define WL_SCANFLAGS_SISO 0x40 /* Use 1 RX chain for scanning */
|
#define WL_SCANFLAGS_MIMO 0x80 /* Force MIMO scanning */
|
|
/* wl_iscan_results status values */
|
#define WL_SCAN_RESULTS_SUCCESS 0
|
#define WL_SCAN_RESULTS_PARTIAL 1
|
#define WL_SCAN_RESULTS_PENDING 2
|
#define WL_SCAN_RESULTS_ABORTED 3
|
#define WL_SCAN_RESULTS_NO_MEM 4
|
|
#define SCANOL_ENABLED (1 << 0)
|
#define SCANOL_BCAST_SSID (1 << 1)
|
#define SCANOL_NOTIFY_BCAST_SSID (1 << 2)
|
#define SCANOL_RESULTS_PER_CYCLE (1 << 3)
|
|
/* scan times in milliseconds */
|
#define SCANOL_HOME_TIME 45 /* for home channel processing */
|
#define SCANOL_ASSOC_TIME 20 /* dwell on a channel while associated */
|
#define SCANOL_UNASSOC_TIME 40 /* dwell on a channel while unassociated */
|
#define SCANOL_PASSIVE_TIME 110 /* listen on a channelfor passive scan */
|
#define SCANOL_AWAY_LIMIT 100 /* max time to be away from home channel */
|
#define SCANOL_IDLE_REST_TIME 40
|
#define SCANOL_IDLE_REST_MULTIPLIER 0
|
#define SCANOL_ACTIVE_REST_TIME 20
|
#define SCANOL_ACTIVE_REST_MULTIPLIER 0
|
#define SCANOL_CYCLE_IDLE_REST_TIME 300000 /* Idle Rest Time between Scan Cycle (msec) */
|
#define SCANOL_CYCLE_IDLE_REST_MULTIPLIER 0 /* Idle Rest Time Multiplier */
|
#define SCANOL_CYCLE_ACTIVE_REST_TIME 200
|
#define SCANOL_CYCLE_ACTIVE_REST_MULTIPLIER 0
|
#define SCANOL_MAX_REST_TIME 3600000 /* max rest time between scan cycle (msec) */
|
#define SCANOL_CYCLE_DEFAULT 0 /* default for Max Scan Cycle, 0 = forever */
|
#define SCANOL_CYCLE_MAX 864000 /* Max Scan Cycle */
|
/* 10 sec/scan cycle => 100 days */
|
#define SCANOL_NPROBES 2 /* for Active scan; send n probes on each channel */
|
#define SCANOL_NPROBES_MAX 5 /* for Active scan; send n probes on each channel */
|
#define SCANOL_SCAN_START_DLY 10 /* delay start of offload scan (sec) */
|
#define SCANOL_SCAN_START_DLY_MAX 240 /* delay start of offload scan (sec) */
|
#define SCANOL_MULTIPLIER_MAX 10 /* Max Multiplier */
|
#define SCANOL_UNASSOC_TIME_MAX 100 /* max dwell on a channel while unassociated */
|
#define SCANOL_PASSIVE_TIME_MAX 500 /* max listen on a channel for passive scan */
|
#define SCANOL_SSID_MAX 16 /* max supported preferred SSID */
|
|
/* masks for channel and ssid count */
|
#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff
|
#define WL_SCAN_PARAMS_NSSID_SHIFT 16
|
|
#define WL_SCAN_ACTION_START 1
|
#define WL_SCAN_ACTION_CONTINUE 2
|
#define WL_SCAN_ACTION_ABORT 3
|
|
#define ANTENNA_NUM_1 1 /* total number of antennas to be used */
|
#define ANTENNA_NUM_2 2
|
#define ANTENNA_NUM_3 3
|
#define ANTENNA_NUM_4 4
|
|
#define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */
|
#define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */
|
#define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */
|
#define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */
|
#define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */
|
#define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */
|
|
/* interference source detection and identification mode */
|
#define ITFR_MODE_DISABLE 0 /* disable feature */
|
#define ITFR_MODE_MANUAL_ENABLE 1 /* enable manual detection */
|
#define ITFR_MODE_AUTO_ENABLE 2 /* enable auto detection */
|
|
/* bit definitions for flags in interference source report */
|
#define ITFR_INTERFERENCED 1 /* interference detected */
|
#define ITFR_HOME_CHANNEL 2 /* home channel has interference */
|
#define ITFR_NOISY_ENVIRONMENT 4 /* noisy environemnt so feature stopped */
|
|
#define WL_NUM_RPI_BINS 8
|
#define WL_RM_TYPE_BASIC 1
|
#define WL_RM_TYPE_CCA 2
|
#define WL_RM_TYPE_RPI 3
|
#define WL_RM_TYPE_ABORT -1 /* ABORT any in-progress RM request */
|
|
#define WL_RM_FLAG_PARALLEL (1<<0)
|
|
#define WL_RM_FLAG_LATE (1<<1)
|
#define WL_RM_FLAG_INCAPABLE (1<<2)
|
#define WL_RM_FLAG_REFUSED (1<<3)
|
|
/* flags */
|
#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
|
|
#define WLC_CIS_DEFAULT 0 /* built-in default */
|
#define WLC_CIS_SROM 1 /* source is sprom */
|
#define WLC_CIS_OTP 2 /* source is otp */
|
|
/* PCL - Power Control Loop */
|
/* current gain setting is replaced by user input */
|
#define WL_ATTEN_APP_INPUT_PCL_OFF 0 /* turn off PCL, apply supplied input */
|
#define WL_ATTEN_PCL_ON 1 /* turn on PCL */
|
/* current gain setting is maintained */
|
#define WL_ATTEN_PCL_OFF 2 /* turn off PCL. */
|
|
/* defines used by poweridx iovar - it controls power in a-band */
|
/* current gain setting is maintained */
|
#define WL_PWRIDX_PCL_OFF -2 /* turn off PCL. */
|
#define WL_PWRIDX_PCL_ON -1 /* turn on PCL */
|
#define WL_PWRIDX_LOWER_LIMIT -2 /* lower limit */
|
#define WL_PWRIDX_UPPER_LIMIT 63 /* upper limit */
|
/* value >= 0 causes
|
* - input to be set to that value
|
* - PCL to be off
|
*/
|
|
#define BCM_MAC_STATUS_INDICATION (0x40010200L)
|
|
/* Values for TX Filter override mode */
|
#define WLC_TXFILTER_OVERRIDE_DISABLED 0
|
#define WLC_TXFILTER_OVERRIDE_ENABLED 1
|
|
/* magic pattern used for mismatch driver and wl */
|
#define WL_TXFIFO_SZ_MAGIC 0xa5a5
|
|
/* check this magic number */
|
#define WLC_IOCTL_MAGIC 0x14e46c77
|
|
|
/* bss_info_cap_t flags */
|
#define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */
|
#define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */
|
#define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info received on channel (vs offchannel) */
|
#define WL_BSS_FLAGS_HS20 0x08 /* hotspot 2.0 capable */
|
#define WL_BSS_FLAGS_RSSI_INVALID 0x10 /* BSS contains invalid RSSI */
|
#define WL_BSS_FLAGS_RSSI_INACCURATE 0x20 /* BSS contains inaccurate RSSI */
|
#define WL_BSS_FLAGS_SNR_INVALID 0x40 /* BSS contains invalid SNR */
|
#define WL_BSS_FLAGS_NF_INVALID 0x80 /* BSS contains invalid noise floor */
|
|
/* bit definitions for bcnflags in wl_bss_info */
|
#define WL_BSS_BCNFLAGS_INTERWORK_PRESENT 0x01 /* beacon had IE, accessnet valid */
|
#define WL_BSS_BCNFLAGS_INTERWORK_PRESENT_VALID 0x02 /* on indicates support for this API */
|
|
/* bssinfo flag for nbss_cap */
|
#define VHT_BI_SGI_80MHZ 0x00000100
|
#define VHT_BI_80MHZ 0x00000200
|
#define VHT_BI_160MHZ 0x00000400
|
#define VHT_BI_8080MHZ 0x00000800
|
|
/* reference to wl_ioctl_t struct used by usermode driver */
|
#define ioctl_subtype set /* subtype param */
|
#define ioctl_pid used /* pid param */
|
#define ioctl_status needed /* status param */
|
|
|
/* Enumerate crypto algorithms */
|
#define CRYPTO_ALGO_OFF 0
|
#define CRYPTO_ALGO_WEP1 1
|
#define CRYPTO_ALGO_TKIP 2
|
#define CRYPTO_ALGO_WEP128 3
|
#define CRYPTO_ALGO_AES_CCM 4
|
#define CRYPTO_ALGO_AES_OCB_MSDU 5
|
#define CRYPTO_ALGO_AES_OCB_MPDU 6
|
#if !defined(BCMEXTCCX)
|
#define CRYPTO_ALGO_NALG 7
|
#else
|
#define CRYPTO_ALGO_CKIP 7
|
#define CRYPTO_ALGO_CKIP_MMH 8
|
#define CRYPTO_ALGO_WEP_MMH 9
|
#define CRYPTO_ALGO_NALG 10
|
#endif
|
|
#define CRYPTO_ALGO_SMS4 11
|
#define CRYPTO_ALGO_PMK 12 /* for 802.1x supp to set PMK before 4-way */
|
#define CRYPTO_ALGO_BIP 13 /* 802.11w BIP (aes cmac) */
|
|
#define CRYPTO_ALGO_AES_GCM 14 /* 128 bit GCM */
|
#define CRYPTO_ALGO_AES_CCM256 15 /* 256 bit CCM */
|
#define CRYPTO_ALGO_AES_GCM256 16 /* 256 bit GCM */
|
#define CRYPTO_ALGO_BIP_CMAC256 17 /* 256 bit BIP CMAC */
|
#define CRYPTO_ALGO_BIP_GMAC 18 /* 128 bit BIP GMAC */
|
#define CRYPTO_ALGO_BIP_GMAC256 19 /* 256 bit BIP GMAC */
|
|
#define CRYPTO_ALGO_NONE CRYPTO_ALGO_OFF
|
|
/* algo bit vector */
|
#define KEY_ALGO_MASK(_algo) (1 << _algo)
|
|
#if defined(BCMEXTCCX)
|
#define KEY_ALGO_MASK_CCX (KEY_ALGO_MASK(CRYPTO_ALGO_CKIP) | \
|
KEY_ALGO_MASK(CRYPTO_ALGO_CKIP_MMH) | \
|
KEY_ALGO_MASK(CRYPTO_ALGO_WEP_MMH))
|
#endif
|
|
#define KEY_ALGO_MASK_WEP (KEY_ALGO_MASK(CRYPTO_ALGO_WEP1) | \
|
KEY_ALGO_MASK(CRYPTO_ALGO_WEP128) | \
|
KEY_ALGO_MASK(CRYPTO_ALGO_NALG))
|
|
#define KEY_ALGO_MASK_AES (KEY_ALGO_MASK(CRYPTO_ALGO_AES_CCM) | \
|
KEY_ALGO_MASK(CRYPTO_ALGO_AES_CCM256) | \
|
KEY_ALGO_MASK(CRYPTO_ALGO_AES_GCM) | \
|
KEY_ALGO_MASK(CRYPTO_ALGO_AES_GCM256))
|
#define KEY_ALGO_MASK_TKIP (KEY_ALGO_MASK(CRYPTO_ALGO_TKIP))
|
#define KEY_ALGO_MASK_WAPI (KEY_ALGO_MASK(CRYPTO_ALGO_SMS4))
|
|
#define WSEC_GEN_MIC_ERROR 0x0001
|
#define WSEC_GEN_REPLAY 0x0002
|
#define WSEC_GEN_ICV_ERROR 0x0004
|
#define WSEC_GEN_MFP_ACT_ERROR 0x0008
|
#define WSEC_GEN_MFP_DISASSOC_ERROR 0x0010
|
#define WSEC_GEN_MFP_DEAUTH_ERROR 0x0020
|
|
#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
|
#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
|
#if defined(BCMEXTCCX)
|
#define WL_CKIP_KP (1 << 4) /* CMIC */
|
#define WL_CKIP_MMH (1 << 5) /* CKIP */
|
#else
|
#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
|
#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
|
#endif
|
#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */
|
|
/* wireless security bitvec */
|
#define WSEC_NONE 0x0
|
#define WEP_ENABLED 0x0001
|
#define TKIP_ENABLED 0x0002
|
#define AES_ENABLED 0x0004
|
#define WSEC_SWFLAG 0x0008
|
#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */
|
#ifdef BCMWAPI_WPI
|
#define SMS4_ENABLED 0x0100
|
#endif /* BCMWAPI_WPI */
|
|
#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED)
|
#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED)
|
#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED)
|
|
#ifdef BCMCCX
|
#define WSEC_CKIP_KP_ENABLED(wsec) ((wsec) & CKIP_KP_ENABLED)
|
#define WSEC_CKIP_MIC_ENABLED(wsec) ((wsec) & CKIP_MIC_ENABLED)
|
#define WSEC_CKIP_ENABLED(wsec) ((wsec) & (CKIP_KP_ENABLED|CKIP_MIC_ENABLED))
|
|
#ifdef BCMWAPI_WPI
|
#define WSEC_ENABLED(wsec) \
|
((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | \
|
CKIP_MIC_ENABLED | SMS4_ENABLED))
|
#else /* BCMWAPI_WPI */
|
#define WSEC_ENABLED(wsec) \
|
((wsec) & \
|
(WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | CKIP_MIC_ENABLED))
|
#endif /* BCMWAPI_WPI */
|
#else /* defined BCMCCX */
|
#ifdef BCMWAPI_WPI
|
#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | SMS4_ENABLED))
|
#else /* BCMWAPI_WPI */
|
#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
|
#endif /* BCMWAPI_WPI */
|
#endif /* BCMCCX */
|
|
#define WSEC_SES_OW_ENABLED(wsec) ((wsec) & SES_OW_ENABLED)
|
#ifdef BCMWAPI_WAI
|
#define WSEC_SMS4_ENABLED(wsec) ((wsec) & SMS4_ENABLED)
|
#endif /* BCMWAPI_WAI */
|
|
/* Following macros are not used any more. Just kept here to
|
* avoid build issue in BISON/CARIBOU branch
|
*/
|
#define MFP_CAPABLE 0x0200
|
#define MFP_REQUIRED 0x0400
|
#define MFP_SHA256 0x0800 /* a special configuration for STA for WIFI test tool */
|
|
/* WPA authentication mode bitvec */
|
#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */
|
#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */
|
#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */
|
#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */
|
#if defined(BCMEXTCCX)
|
#define WPA_AUTH_CCKM 0x0008 /* CCKM */
|
#define WPA2_AUTH_CCKM 0x0010 /* CCKM2 */
|
#endif
|
/* #define WPA_AUTH_8021X 0x0020 */ /* 802.1x, reserved */
|
#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */
|
#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */
|
#define BRCM_AUTH_PSK 0x0100 /* BRCM specific PSK */
|
#define BRCM_AUTH_DPT 0x0200 /* DPT PSK without group keys */
|
#if defined(BCMWAPI_WAI) || defined(BCMWAPI_WPI)
|
#define WPA_AUTH_WAPI 0x0400
|
#define WAPI_AUTH_NONE WPA_AUTH_NONE /* none (IBSS) */
|
#define WAPI_AUTH_UNSPECIFIED 0x0400 /* over AS */
|
#define WAPI_AUTH_PSK 0x0800 /* Pre-shared key */
|
#endif /* BCMWAPI_WAI || BCMWAPI_WPI */
|
#define WPA2_AUTH_1X_SHA256 0x1000 /* 1X with SHA256 key derivation */
|
#define WPA2_AUTH_TPK 0x2000 /* TDLS Peer Key */
|
#define WPA2_AUTH_FT 0x4000 /* Fast Transition. */
|
#define WPA2_AUTH_PSK_SHA256 0x8000 /* PSK with SHA256 key derivation */
|
#define WPA3_AUTH_SAE_PSK 0x40000 /* SAE with 4-way handshake */
|
/* WPA2_AUTH_SHA256 not used anymore. Just kept here to avoid build issue in DINGO */
|
#define WPA2_AUTH_SHA256 0x8000
|
#define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */
|
|
/* pmkid */
|
#define MAXPMKID 16
|
|
/* SROM12 changes */
|
#define WLC_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */
|
|
|
#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */
|
#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */
|
#if defined(LCNCONF) || defined(LCN40CONF) || defined(LCN20CONF)
|
#define WLC_SAMPLECOLLECT_MAXLEN 8192 /* Max Sample Collect buffer */
|
#else
|
#define WLC_SAMPLECOLLECT_MAXLEN 10240 /* Max Sample Collect buffer for two cores */
|
#endif
|
#define WLC_SAMPLECOLLECT_MAXLEN_LCN40 8192
|
|
/* common ioctl definitions */
|
#define WLC_GET_MAGIC 0
|
#define WLC_GET_VERSION 1
|
#define WLC_UP 2
|
#define WLC_DOWN 3
|
#define WLC_GET_LOOP 4
|
#define WLC_SET_LOOP 5
|
#define WLC_DUMP 6
|
#define WLC_GET_MSGLEVEL 7
|
#define WLC_SET_MSGLEVEL 8
|
#define WLC_GET_PROMISC 9
|
#define WLC_SET_PROMISC 10
|
/* #define WLC_OVERLAY_IOCTL 11 */ /* not supported */
|
#define WLC_GET_RATE 12
|
#define WLC_GET_MAX_RATE 13
|
#define WLC_GET_INSTANCE 14
|
/* #define WLC_GET_FRAG 15 */ /* no longer supported */
|
/* #define WLC_SET_FRAG 16 */ /* no longer supported */
|
/* #define WLC_GET_RTS 17 */ /* no longer supported */
|
/* #define WLC_SET_RTS 18 */ /* no longer supported */
|
#define WLC_GET_INFRA 19
|
#define WLC_SET_INFRA 20
|
#define WLC_GET_AUTH 21
|
#define WLC_SET_AUTH 22
|
#define WLC_GET_BSSID 23
|
#define WLC_SET_BSSID 24
|
#define WLC_GET_SSID 25
|
#define WLC_SET_SSID 26
|
#define WLC_RESTART 27
|
#define WLC_TERMINATED 28
|
/* #define WLC_DUMP_SCB 28 */ /* no longer supported */
|
#define WLC_GET_CHANNEL 29
|
#define WLC_SET_CHANNEL 30
|
#define WLC_GET_SRL 31
|
#define WLC_SET_SRL 32
|
#define WLC_GET_LRL 33
|
#define WLC_SET_LRL 34
|
#define WLC_GET_PLCPHDR 35
|
#define WLC_SET_PLCPHDR 36
|
#define WLC_GET_RADIO 37
|
#define WLC_SET_RADIO 38
|
#define WLC_GET_PHYTYPE 39
|
#define WLC_DUMP_RATE 40
|
#define WLC_SET_RATE_PARAMS 41
|
#define WLC_GET_FIXRATE 42
|
#define WLC_SET_FIXRATE 43
|
/* #define WLC_GET_WEP 42 */ /* no longer supported */
|
/* #define WLC_SET_WEP 43 */ /* no longer supported */
|
#define WLC_GET_KEY 44
|
#define WLC_SET_KEY 45
|
#define WLC_GET_REGULATORY 46
|
#define WLC_SET_REGULATORY 47
|
#define WLC_GET_PASSIVE_SCAN 48
|
#define WLC_SET_PASSIVE_SCAN 49
|
#define WLC_SCAN 50
|
#define WLC_SCAN_RESULTS 51
|
#define WLC_DISASSOC 52
|
#define WLC_REASSOC 53
|
#define WLC_GET_ROAM_TRIGGER 54
|
#define WLC_SET_ROAM_TRIGGER 55
|
#define WLC_GET_ROAM_DELTA 56
|
#define WLC_SET_ROAM_DELTA 57
|
#define WLC_GET_ROAM_SCAN_PERIOD 58
|
#define WLC_SET_ROAM_SCAN_PERIOD 59
|
#define WLC_EVM 60 /* diag */
|
#define WLC_GET_TXANT 61
|
#define WLC_SET_TXANT 62
|
#define WLC_GET_ANTDIV 63
|
#define WLC_SET_ANTDIV 64
|
/* #define WLC_GET_TXPWR 65 */ /* no longer supported */
|
/* #define WLC_SET_TXPWR 66 */ /* no longer supported */
|
#define WLC_GET_CLOSED 67
|
#define WLC_SET_CLOSED 68
|
#define WLC_GET_MACLIST 69
|
#define WLC_SET_MACLIST 70
|
#define WLC_GET_RATESET 71
|
#define WLC_SET_RATESET 72
|
/* #define WLC_GET_LOCALE 73 */ /* no longer supported */
|
#define WLC_LONGTRAIN 74
|
#define WLC_GET_BCNPRD 75
|
#define WLC_SET_BCNPRD 76
|
#define WLC_GET_DTIMPRD 77
|
#define WLC_SET_DTIMPRD 78
|
#define WLC_GET_SROM 79
|
#define WLC_SET_SROM 80
|
#define WLC_GET_WEP_RESTRICT 81
|
#define WLC_SET_WEP_RESTRICT 82
|
#define WLC_GET_COUNTRY 83
|
#define WLC_SET_COUNTRY 84
|
#define WLC_GET_PM 85
|
#define WLC_SET_PM 86
|
#define WLC_GET_WAKE 87
|
#define WLC_SET_WAKE 88
|
/* #define WLC_GET_D11CNTS 89 */ /* -> "counters" iovar */
|
#define WLC_GET_FORCELINK 90 /* ndis only */
|
#define WLC_SET_FORCELINK 91 /* ndis only */
|
#define WLC_FREQ_ACCURACY 92 /* diag */
|
#define WLC_CARRIER_SUPPRESS 93 /* diag */
|
#define WLC_GET_PHYREG 94
|
#define WLC_SET_PHYREG 95
|
#define WLC_GET_RADIOREG 96
|
#define WLC_SET_RADIOREG 97
|
#define WLC_GET_REVINFO 98
|
#define WLC_GET_UCANTDIV 99
|
#define WLC_SET_UCANTDIV 100
|
#define WLC_R_REG 101
|
#define WLC_W_REG 102
|
/* #define WLC_DIAG_LOOPBACK 103 old tray diag */
|
/* #define WLC_RESET_D11CNTS 104 */ /* -> "reset_d11cnts" iovar */
|
#define WLC_GET_MACMODE 105
|
#define WLC_SET_MACMODE 106
|
#define WLC_GET_MONITOR 107
|
#define WLC_SET_MONITOR 108
|
#define WLC_GET_GMODE 109
|
#define WLC_SET_GMODE 110
|
#define WLC_GET_LEGACY_ERP 111
|
#define WLC_SET_LEGACY_ERP 112
|
#define WLC_GET_RX_ANT 113
|
#define WLC_GET_CURR_RATESET 114 /* current rateset */
|
#define WLC_GET_SCANSUPPRESS 115
|
#define WLC_SET_SCANSUPPRESS 116
|
#define WLC_GET_AP 117
|
#define WLC_SET_AP 118
|
#define WLC_GET_EAP_RESTRICT 119
|
#define WLC_SET_EAP_RESTRICT 120
|
#define WLC_SCB_AUTHORIZE 121
|
#define WLC_SCB_DEAUTHORIZE 122
|
#define WLC_GET_WDSLIST 123
|
#define WLC_SET_WDSLIST 124
|
#define WLC_GET_ATIM 125
|
#define WLC_SET_ATIM 126
|
#define WLC_GET_RSSI 127
|
#define WLC_GET_PHYANTDIV 128
|
#define WLC_SET_PHYANTDIV 129
|
#define WLC_AP_RX_ONLY 130
|
#define WLC_GET_TX_PATH_PWR 131
|
#define WLC_SET_TX_PATH_PWR 132
|
#define WLC_GET_WSEC 133
|
#define WLC_SET_WSEC 134
|
#define WLC_GET_PHY_NOISE 135
|
#define WLC_GET_BSS_INFO 136
|
#define WLC_GET_PKTCNTS 137
|
#define WLC_GET_LAZYWDS 138
|
#define WLC_SET_LAZYWDS 139
|
#define WLC_GET_BANDLIST 140
|
|
#define WLC_GET_BAND 141
|
#define WLC_SET_BAND 142
|
#define WLC_SCB_DEAUTHENTICATE 143
|
#define WLC_GET_SHORTSLOT 144
|
#define WLC_GET_SHORTSLOT_OVERRIDE 145
|
#define WLC_SET_SHORTSLOT_OVERRIDE 146
|
#define WLC_GET_SHORTSLOT_RESTRICT 147
|
#define WLC_SET_SHORTSLOT_RESTRICT 148
|
#define WLC_GET_GMODE_PROTECTION 149
|
#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
|
#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
|
#define WLC_UPGRADE 152
|
/* #define WLC_GET_MRATE 153 */ /* no longer supported */
|
/* #define WLC_SET_MRATE 154 */ /* no longer supported */
|
#define WLC_GET_IGNORE_BCNS 155
|
#define WLC_SET_IGNORE_BCNS 156
|
#define WLC_GET_SCB_TIMEOUT 157
|
#define WLC_SET_SCB_TIMEOUT 158
|
#define WLC_GET_ASSOCLIST 159
|
#define WLC_GET_CLK 160
|
#define WLC_SET_CLK 161
|
#define WLC_GET_UP 162
|
#define WLC_OUT 163
|
#define WLC_GET_WPA_AUTH 164
|
#define WLC_SET_WPA_AUTH 165
|
#define WLC_GET_UCFLAGS 166
|
#define WLC_SET_UCFLAGS 167
|
#define WLC_GET_PWRIDX 168
|
#define WLC_SET_PWRIDX 169
|
#define WLC_GET_TSSI 170
|
#define WLC_GET_SUP_RATESET_OVERRIDE 171
|
#define WLC_SET_SUP_RATESET_OVERRIDE 172
|
/* #define WLC_SET_FAST_TIMER 173 */ /* no longer supported */
|
/* #define WLC_GET_FAST_TIMER 174 */ /* no longer supported */
|
/* #define WLC_SET_SLOW_TIMER 175 */ /* no longer supported */
|
/* #define WLC_GET_SLOW_TIMER 176 */ /* no longer supported */
|
/* #define WLC_DUMP_PHYREGS 177 */ /* no longer supported */
|
#define WLC_GET_PROTECTION_CONTROL 178
|
#define WLC_SET_PROTECTION_CONTROL 179
|
#define WLC_GET_PHYLIST 180
|
#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */
|
#define WLC_DECRYPT_STATUS 182 /* ndis only */
|
#define WLC_GET_KEY_SEQ 183
|
#define WLC_GET_SCAN_CHANNEL_TIME 184
|
#define WLC_SET_SCAN_CHANNEL_TIME 185
|
#define WLC_GET_SCAN_UNASSOC_TIME 186
|
#define WLC_SET_SCAN_UNASSOC_TIME 187
|
#define WLC_GET_SCAN_HOME_TIME 188
|
#define WLC_SET_SCAN_HOME_TIME 189
|
#define WLC_GET_SCAN_NPROBES 190
|
#define WLC_SET_SCAN_NPROBES 191
|
#define WLC_GET_PRB_RESP_TIMEOUT 192
|
#define WLC_SET_PRB_RESP_TIMEOUT 193
|
#define WLC_GET_ATTEN 194
|
#define WLC_SET_ATTEN 195
|
#define WLC_GET_SHMEM 196 /* diag */
|
#define WLC_SET_SHMEM 197 /* diag */
|
/* #define WLC_GET_GMODE_PROTECTION_CTS 198 */ /* no longer supported */
|
/* #define WLC_SET_GMODE_PROTECTION_CTS 199 */ /* no longer supported */
|
#define WLC_SET_WSEC_TEST 200
|
#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
|
#define WLC_TKIP_COUNTERMEASURES 202
|
#define WLC_GET_PIOMODE 203
|
#define WLC_SET_PIOMODE 204
|
#define WLC_SET_ASSOC_PREFER 205
|
#define WLC_GET_ASSOC_PREFER 206
|
#define WLC_SET_ROAM_PREFER 207
|
#define WLC_GET_ROAM_PREFER 208
|
#define WLC_SET_LED 209
|
#define WLC_GET_LED 210
|
#define WLC_GET_INTERFERENCE_MODE 211
|
#define WLC_SET_INTERFERENCE_MODE 212
|
#define WLC_GET_CHANNEL_QA 213
|
#define WLC_START_CHANNEL_QA 214
|
#define WLC_GET_CHANNEL_SEL 215
|
#define WLC_START_CHANNEL_SEL 216
|
#define WLC_GET_VALID_CHANNELS 217
|
#define WLC_GET_FAKEFRAG 218
|
#define WLC_SET_FAKEFRAG 219
|
#define WLC_GET_PWROUT_PERCENTAGE 220
|
#define WLC_SET_PWROUT_PERCENTAGE 221
|
#define WLC_SET_BAD_FRAME_PREEMPT 222
|
#define WLC_GET_BAD_FRAME_PREEMPT 223
|
#define WLC_SET_LEAP_LIST 224
|
#define WLC_GET_LEAP_LIST 225
|
#define WLC_GET_CWMIN 226
|
#define WLC_SET_CWMIN 227
|
#define WLC_GET_CWMAX 228
|
#define WLC_SET_CWMAX 229
|
#define WLC_GET_WET 230
|
#define WLC_SET_WET 231
|
#define WLC_GET_PUB 232
|
/* #define WLC_SET_GLACIAL_TIMER 233 */ /* no longer supported */
|
/* #define WLC_GET_GLACIAL_TIMER 234 */ /* no longer supported */
|
#define WLC_GET_KEY_PRIMARY 235
|
#define WLC_SET_KEY_PRIMARY 236
|
|
|
/* #define WLC_DUMP_RADIOREGS 237 */ /* no longer supported */
|
#define WLC_GET_ACI_ARGS 238
|
#define WLC_SET_ACI_ARGS 239
|
#define WLC_UNSET_CALLBACK 240
|
#define WLC_SET_CALLBACK 241
|
#define WLC_GET_RADAR 242
|
#define WLC_SET_RADAR 243
|
#define WLC_SET_SPECT_MANAGMENT 244
|
#define WLC_GET_SPECT_MANAGMENT 245
|
#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */
|
#define WLC_WDS_GET_WPA_SUP 247
|
#define WLC_SET_CS_SCAN_TIMER 248
|
#define WLC_GET_CS_SCAN_TIMER 249
|
#define WLC_MEASURE_REQUEST 250
|
#define WLC_INIT 251
|
#define WLC_SEND_QUIET 252
|
#define WLC_KEEPALIVE 253
|
#define WLC_SEND_PWR_CONSTRAINT 254
|
#define WLC_UPGRADE_STATUS 255
|
#define WLC_CURRENT_PWR 256
|
#define WLC_GET_SCAN_PASSIVE_TIME 257
|
#define WLC_SET_SCAN_PASSIVE_TIME 258
|
#define WLC_LEGACY_LINK_BEHAVIOR 259
|
#define WLC_GET_CHANNELS_IN_COUNTRY 260
|
#define WLC_GET_COUNTRY_LIST 261
|
#define WLC_GET_VAR 262 /* get value of named variable */
|
#define WLC_SET_VAR 263 /* set named variable to value */
|
#define WLC_NVRAM_GET 264 /* deprecated */
|
#define WLC_NVRAM_SET 265
|
#define WLC_NVRAM_DUMP 266
|
#define WLC_REBOOT 267
|
#define WLC_SET_WSEC_PMK 268
|
#define WLC_GET_AUTH_MODE 269
|
#define WLC_SET_AUTH_MODE 270
|
#define WLC_GET_WAKEENTRY 271
|
#define WLC_SET_WAKEENTRY 272
|
#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */
|
#define WLC_NVOTPW 274
|
#define WLC_OTPW 275
|
#define WLC_IOV_BLOCK_GET 276
|
#define WLC_IOV_MODULES_GET 277
|
#define WLC_SOFT_RESET 278
|
#define WLC_GET_ALLOW_MODE 279
|
#define WLC_SET_ALLOW_MODE 280
|
#define WLC_GET_DESIRED_BSSID 281
|
#define WLC_SET_DESIRED_BSSID 282
|
#define WLC_DISASSOC_MYAP 283
|
#define WLC_GET_NBANDS 284 /* for Dongle EXT_STA support */
|
#define WLC_GET_BANDSTATES 285 /* for Dongle EXT_STA support */
|
#define WLC_GET_WLC_BSS_INFO 286 /* for Dongle EXT_STA support */
|
#define WLC_GET_ASSOC_INFO 287 /* for Dongle EXT_STA support */
|
#define WLC_GET_OID_PHY 288 /* for Dongle EXT_STA support */
|
#define WLC_SET_OID_PHY 289 /* for Dongle EXT_STA support */
|
#define WLC_SET_ASSOC_TIME 290 /* for Dongle EXT_STA support */
|
#define WLC_GET_DESIRED_SSID 291 /* for Dongle EXT_STA support */
|
#define WLC_GET_CHANSPEC 292 /* for Dongle EXT_STA support */
|
#define WLC_GET_ASSOC_STATE 293 /* for Dongle EXT_STA support */
|
#define WLC_SET_PHY_STATE 294 /* for Dongle EXT_STA support */
|
#define WLC_GET_SCAN_PENDING 295 /* for Dongle EXT_STA support */
|
#define WLC_GET_SCANREQ_PENDING 296 /* for Dongle EXT_STA support */
|
#define WLC_GET_PREV_ROAM_REASON 297 /* for Dongle EXT_STA support */
|
#define WLC_SET_PREV_ROAM_REASON 298 /* for Dongle EXT_STA support */
|
#define WLC_GET_BANDSTATES_PI 299 /* for Dongle EXT_STA support */
|
#define WLC_GET_PHY_STATE 300 /* for Dongle EXT_STA support */
|
#define WLC_GET_BSS_WPA_RSN 301 /* for Dongle EXT_STA support */
|
#define WLC_GET_BSS_WPA2_RSN 302 /* for Dongle EXT_STA support */
|
#define WLC_GET_BSS_BCN_TS 303 /* for Dongle EXT_STA support */
|
#define WLC_GET_INT_DISASSOC 304 /* for Dongle EXT_STA support */
|
#define WLC_SET_NUM_PEERS 305 /* for Dongle EXT_STA support */
|
#define WLC_GET_NUM_BSS 306 /* for Dongle EXT_STA support */
|
#define WLC_PHY_SAMPLE_COLLECT 307 /* phy sample collect mode */
|
/* #define WLC_UM_PRIV 308 */ /* Deprecated: usermode driver */
|
#define WLC_GET_CMD 309
|
/* #define WLC_LAST 310 */ /* Never used - can be reused */
|
#define WLC_SET_INTERFERENCE_OVERRIDE_MODE 311 /* set inter mode override */
|
#define WLC_GET_INTERFERENCE_OVERRIDE_MODE 312 /* get inter mode override */
|
/* #define WLC_GET_WAI_RESTRICT 313 */
|
/* #define WLC_SET_WAI_RESTRICT 314 */
|
/* #define WLC_SET_WAI_REKEY 315 */
|
#define WLC_SET_NAT_CONFIG 316 /* for configuring NAT filter driver */
|
#define WLC_GET_NAT_STATE 317
|
#define WLC_GET_TXBF_RATESET 318
|
#define WLC_SET_TXBF_RATESET 319
|
#define WLC_SCAN_CQ 320
|
#define WLC_GET_RSSI_QDB 321 /* qdB portion of the RSSI */
|
#define WLC_DUMP_RATESET 322
|
#define WLC_ECHO 323
|
#define WLC_SCB_AUTHENTICATE 325
|
#define WLC_LAST 326
|
#define WLC_SPEC_FLAG 0x80000000 /* For some special IOCTL */
|
#ifndef EPICTRL_COOKIE
|
#define EPICTRL_COOKIE 0xABADCEDE
|
#endif
|
|
/* vx wlc ioctl's offset */
|
#define CMN_IOCTL_OFF 0x180
|
|
/*
|
* custom OID support
|
*
|
* 0xFF - implementation specific OID
|
* 0xE4 - first byte of Broadcom PCI vendor ID
|
* 0x14 - second byte of Broadcom PCI vendor ID
|
* 0xXX - the custom OID number
|
*/
|
|
/* begin 0x1f values beyond the start of the ET driver range. */
|
#define WL_OID_BASE 0xFFE41420
|
|
/* NDIS overrides */
|
#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
|
#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK)
|
#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK)
|
#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH)
|
#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS)
|
#define OID_LEGACY_LINK_BEHAVIOR (WL_OID_BASE + WLC_LEGACY_LINK_BEHAVIOR)
|
#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM)
|
|
/* EXT_STA Dongle suuport */
|
#define OID_STA_CHANSPEC (WL_OID_BASE + WLC_GET_CHANSPEC)
|
#define OID_STA_NBANDS (WL_OID_BASE + WLC_GET_NBANDS)
|
#define OID_STA_GET_PHY (WL_OID_BASE + WLC_GET_OID_PHY)
|
#define OID_STA_SET_PHY (WL_OID_BASE + WLC_SET_OID_PHY)
|
#define OID_STA_ASSOC_TIME (WL_OID_BASE + WLC_SET_ASSOC_TIME)
|
#define OID_STA_DESIRED_SSID (WL_OID_BASE + WLC_GET_DESIRED_SSID)
|
#define OID_STA_SET_PHY_STATE (WL_OID_BASE + WLC_SET_PHY_STATE)
|
#define OID_STA_SCAN_PENDING (WL_OID_BASE + WLC_GET_SCAN_PENDING)
|
#define OID_STA_SCANREQ_PENDING (WL_OID_BASE + WLC_GET_SCANREQ_PENDING)
|
#define OID_STA_GET_ROAM_REASON (WL_OID_BASE + WLC_GET_PREV_ROAM_REASON)
|
#define OID_STA_SET_ROAM_REASON (WL_OID_BASE + WLC_SET_PREV_ROAM_REASON)
|
#define OID_STA_GET_PHY_STATE (WL_OID_BASE + WLC_GET_PHY_STATE)
|
#define OID_STA_INT_DISASSOC (WL_OID_BASE + WLC_GET_INT_DISASSOC)
|
#define OID_STA_SET_NUM_PEERS (WL_OID_BASE + WLC_SET_NUM_PEERS)
|
#define OID_STA_GET_NUM_BSS (WL_OID_BASE + WLC_GET_NUM_BSS)
|
|
/* NAT filter driver support */
|
#define OID_NAT_SET_CONFIG (WL_OID_BASE + WLC_SET_NAT_CONFIG)
|
#define OID_NAT_GET_STATE (WL_OID_BASE + WLC_GET_NAT_STATE)
|
|
#define WL_DECRYPT_STATUS_SUCCESS 1
|
#define WL_DECRYPT_STATUS_FAILURE 2
|
#define WL_DECRYPT_STATUS_UNKNOWN 3
|
|
/* allows user-mode app to poll the status of USB image upgrade */
|
#define WLC_UPGRADE_SUCCESS 0
|
#define WLC_UPGRADE_PENDING 1
|
|
/* WLC_GET_AUTH, WLC_SET_AUTH values */
|
#define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */
|
#define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */
|
#define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */
|
#define WL_AUTH_SAE_KEY 3 /* d11 sae authentication */
|
|
/* a large TX Power as an init value to factor out of MIN() calculations,
|
* keep low enough to fit in an int8, units are .25 dBm
|
*/
|
#define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */
|
|
/* "diag" iovar argument and error code */
|
#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */
|
#define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */
|
#define WL_DIAG_MEMORY 3 /* d11 memory test */
|
#define WL_DIAG_LED 4 /* LED test */
|
#define WL_DIAG_REG 5 /* d11/phy register test */
|
#define WL_DIAG_SROM 6 /* srom read/crc test */
|
#define WL_DIAG_DMA 7 /* DMA test */
|
#define WL_DIAG_LOOPBACK_EXT 8 /* enhenced d11 loopback data test */
|
|
#define WL_DIAGERR_SUCCESS 0
|
#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */
|
#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */
|
#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */
|
#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */
|
#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */
|
#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */
|
#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */
|
#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */
|
#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */
|
#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */
|
|
#define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */
|
#define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */
|
|
/* band types */
|
#define WLC_BAND_AUTO 0 /* auto-select */
|
#define WLC_BAND_5G 1 /* 5 Ghz */
|
#define WLC_BAND_2G 2 /* 2.4 Ghz */
|
#define WLC_BAND_ALL 3 /* all bands */
|
#define WLC_BAND_INVALID -1 /* Invalid band */
|
|
/* band range returned by band_range iovar */
|
#define WL_CHAN_FREQ_RANGE_2G 0
|
#define WL_CHAN_FREQ_RANGE_5GL 1
|
#define WL_CHAN_FREQ_RANGE_5GM 2
|
#define WL_CHAN_FREQ_RANGE_5GH 3
|
|
#define WL_CHAN_FREQ_RANGE_5GLL_5BAND 4
|
#define WL_CHAN_FREQ_RANGE_5GLH_5BAND 5
|
#define WL_CHAN_FREQ_RANGE_5GML_5BAND 6
|
#define WL_CHAN_FREQ_RANGE_5GMH_5BAND 7
|
#define WL_CHAN_FREQ_RANGE_5GH_5BAND 8
|
|
#define WL_CHAN_FREQ_RANGE_5G_BAND0 1
|
#define WL_CHAN_FREQ_RANGE_5G_BAND1 2
|
#define WL_CHAN_FREQ_RANGE_5G_BAND2 3
|
#define WL_CHAN_FREQ_RANGE_5G_BAND3 4
|
#define WL_CHAN_FREQ_RANGE_5G_4BAND 5
|
|
/* SROM12 */
|
#define WL_CHAN_FREQ_RANGE_5G_BAND4 5
|
#define WL_CHAN_FREQ_RANGE_2G_40 6
|
#define WL_CHAN_FREQ_RANGE_5G_BAND0_40 7
|
#define WL_CHAN_FREQ_RANGE_5G_BAND1_40 8
|
#define WL_CHAN_FREQ_RANGE_5G_BAND2_40 9
|
#define WL_CHAN_FREQ_RANGE_5G_BAND3_40 10
|
#define WL_CHAN_FREQ_RANGE_5G_BAND4_40 11
|
#define WL_CHAN_FREQ_RANGE_5G_BAND0_80 12
|
#define WL_CHAN_FREQ_RANGE_5G_BAND1_80 13
|
#define WL_CHAN_FREQ_RANGE_5G_BAND2_80 14
|
#define WL_CHAN_FREQ_RANGE_5G_BAND3_80 15
|
#define WL_CHAN_FREQ_RANGE_5G_BAND4_80 16
|
|
#define WL_CHAN_FREQ_RANGE_5G_5BAND 18
|
#define WL_CHAN_FREQ_RANGE_5G_5BAND_40 19
|
#define WL_CHAN_FREQ_RANGE_5G_5BAND_80 20
|
|
#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
|
#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
|
#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
|
|
/*
|
* 54g modes (basic bits may still be overridden)
|
*
|
* GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11
|
* Preamble: Long
|
* Shortslot: Off
|
* GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
|
* Extended Rateset: 6, 9, 12, 48
|
* Preamble: Long
|
* Shortslot: Auto
|
* GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54
|
* Extended Rateset: 6b, 9, 12b, 48
|
* Preamble: Short required
|
* Shortslot: Auto
|
* GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
|
* Extended Rateset: 6, 9, 12, 48
|
* Preamble: Long
|
* Shortslot: On
|
* GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54
|
* Preamble: Short required
|
* Shortslot: On and required
|
* GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b
|
* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54
|
* Preamble: Long
|
* Shortslot: Auto
|
*/
|
#define GMODE_LEGACY_B 0
|
#define GMODE_AUTO 1
|
#define GMODE_ONLY 2
|
#define GMODE_B_DEFERRED 3
|
#define GMODE_PERFORMANCE 4
|
#define GMODE_LRS 5
|
#define GMODE_MAX 6
|
|
/* values for PLCPHdr_override */
|
#define WLC_PLCP_AUTO -1
|
#define WLC_PLCP_SHORT 0
|
#define WLC_PLCP_LONG 1
|
|
/* values for g_protection_override and n_protection_override */
|
#define WLC_PROTECTION_AUTO -1
|
#define WLC_PROTECTION_OFF 0
|
#define WLC_PROTECTION_ON 1
|
#define WLC_PROTECTION_MMHDR_ONLY 2
|
#define WLC_PROTECTION_CTS_ONLY 3
|
|
/* values for g_protection_control and n_protection_control */
|
#define WLC_PROTECTION_CTL_OFF 0
|
#define WLC_PROTECTION_CTL_LOCAL 1
|
#define WLC_PROTECTION_CTL_OVERLAP 2
|
|
/* values for n_protection */
|
#define WLC_N_PROTECTION_OFF 0
|
#define WLC_N_PROTECTION_OPTIONAL 1
|
#define WLC_N_PROTECTION_20IN40 2
|
#define WLC_N_PROTECTION_MIXEDMODE 3
|
|
/* values for n_preamble_type */
|
#define WLC_N_PREAMBLE_MIXEDMODE 0
|
#define WLC_N_PREAMBLE_GF 1
|
#define WLC_N_PREAMBLE_GF_BRCM 2
|
|
/* values for band specific 40MHz capabilities (deprecated) */
|
#define WLC_N_BW_20ALL 0
|
#define WLC_N_BW_40ALL 1
|
#define WLC_N_BW_20IN2G_40IN5G 2
|
|
#define WLC_BW_20MHZ_BIT (1<<0)
|
#define WLC_BW_40MHZ_BIT (1<<1)
|
#define WLC_BW_80MHZ_BIT (1<<2)
|
#define WLC_BW_160MHZ_BIT (1<<3)
|
#define WLC_BW_10MHZ_BIT (1<<4)
|
#define WLC_BW_5MHZ_BIT (1<<5)
|
#define WLC_BW_2P5MHZ_BIT (1<<6)
|
/* Bandwidth capabilities */
|
#define WLC_BW_CAP_20MHZ (WLC_BW_20MHZ_BIT)
|
#define WLC_BW_CAP_40MHZ (WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT)
|
#define WLC_BW_CAP_80MHZ (WLC_BW_80MHZ_BIT|WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT)
|
#define WLC_BW_CAP_160MHZ (WLC_BW_160MHZ_BIT|WLC_BW_80MHZ_BIT| \
|
WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT)
|
#define WLC_BW_CAP_2P5MHZ (WLC_BW_2P5MHZ_BIT)
|
#define WLC_BW_CAP_5MHZ (WLC_BW_5MHZ_BIT)
|
#define WLC_BW_CAP_10MHZ (WLC_BW_10MHZ_BIT)
|
#define WLC_BW_CAP_UNRESTRICTED 0xFF
|
|
#define WL_BW_CAP_20MHZ(bw_cap) (((bw_cap) & WLC_BW_20MHZ_BIT) ? TRUE : FALSE)
|
#define WL_BW_CAP_40MHZ(bw_cap) (((bw_cap) & WLC_BW_40MHZ_BIT) ? TRUE : FALSE)
|
#define WL_BW_CAP_80MHZ(bw_cap) (((bw_cap) & WLC_BW_80MHZ_BIT) ? TRUE : FALSE)
|
#define WL_BW_CAP_160MHZ(bw_cap)(((bw_cap) & WLC_BW_160MHZ_BIT) ? TRUE : FALSE)
|
#define WL_BW_CAP_2P5MHZ(bw_cap)(((bw_cap) & WLC_BW_2P5MHZ_BIT) ? TRUE : FALSE)
|
#define WL_BW_CAP_5MHZ(bw_cap) (((bw_cap) & WLC_BW_5MHZ_BIT) ? TRUE : FALSE)
|
#define WL_BW_CAP_10MHZ(bw_cap) (((bw_cap) & WLC_BW_10MHZ_BIT) ? TRUE : FALSE)
|
/* values to force tx/rx chain */
|
#define WLC_N_TXRX_CHAIN0 0
|
#define WLC_N_TXRX_CHAIN1 1
|
|
/* bitflags for SGI support (sgi_rx iovar) */
|
#define WLC_N_SGI_20 0x01
|
#define WLC_N_SGI_40 0x02
|
#define WLC_VHT_SGI_80 0x04
|
#define WLC_VHT_SGI_160 0x08
|
|
/* when sgi_tx==WLC_SGI_ALL, bypass rate selection, enable sgi for all mcs */
|
#define WLC_SGI_ALL 0x02
|
|
#define LISTEN_INTERVAL 10
|
/* interference mitigation options */
|
#define INTERFERE_OVRRIDE_OFF -1 /* interference override off */
|
#define INTERFERE_NONE 0 /* off */
|
#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */
|
#define WLAN_MANUAL 2 /* ACI: no auto detection */
|
#define WLAN_AUTO 3 /* ACI: auto detect */
|
#define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */
|
#define AUTO_ACTIVE (1 << 7) /* Auto is currently active */
|
|
/* interfernece mode bit-masks (ACPHY) */
|
#define ACPHY_ACI_GLITCHBASED_DESENSE 1 /* bit 0 */
|
#define ACPHY_ACI_HWACI_PKTGAINLMT 2 /* bit 1 */
|
#define ACPHY_ACI_W2NB_PKTGAINLMT 4 /* bit 2 */
|
#define ACPHY_ACI_PREEMPTION 8 /* bit 3 */
|
#define ACPHY_HWACI_MITIGATION 16 /* bit 4 */
|
#define ACPHY_LPD_PREEMPTION 32 /* bit 5 */
|
#define ACPHY_HWOBSS_MITIGATION 64 /* bit 6 */
|
#define ACPHY_ACI_MAX_MODE 127
|
|
/* AP environment */
|
#define AP_ENV_DETECT_NOT_USED 0 /* We aren't using AP environment detection */
|
#define AP_ENV_DENSE 1 /* "Corporate" or other AP dense environment */
|
#define AP_ENV_SPARSE 2 /* "Home" or other sparse environment */
|
#define AP_ENV_INDETERMINATE 3 /* AP environment hasn't been identified */
|
|
#define TRIGGER_NOW 0
|
#define TRIGGER_CRS 0x01
|
#define TRIGGER_CRSDEASSERT 0x02
|
#define TRIGGER_GOODFCS 0x04
|
#define TRIGGER_BADFCS 0x08
|
#define TRIGGER_BADPLCP 0x10
|
#define TRIGGER_CRSGLITCH 0x20
|
|
#define WL_SAMPLEDATA_HEADER_TYPE 1
|
#define WL_SAMPLEDATA_HEADER_SIZE 80 /* sample collect header size (bytes) */
|
#define WL_SAMPLEDATA_TYPE 2
|
#define WL_SAMPLEDATA_SEQ 0xff /* sequence # */
|
#define WL_SAMPLEDATA_MORE_DATA 0x100 /* more data mask */
|
|
/* WL_OTA START */
|
#define WL_OTA_ARG_PARSE_BLK_SIZE 1200
|
#define WL_OTA_TEST_MAX_NUM_RATE 30
|
#define WL_OTA_TEST_MAX_NUM_SEQ 100
|
#define WL_OTA_TEST_MAX_NUM_RSSI 85
|
#define WL_THRESHOLD_LO_BAND 70 /* range from 5250MHz - 5350MHz */
|
|
/* radar iovar SET defines */
|
#define WL_RADAR_DETECTOR_OFF 0 /* radar detector off */
|
#define WL_RADAR_DETECTOR_ON 1 /* radar detector on */
|
#define WL_RADAR_SIMULATED 2 /* force radar detector to declare
|
* detection once
|
*/
|
#define WL_RADAR_SIMULATED_SC 3 /* force radar detector to declare
|
* detection once on scan core
|
* if available and active
|
*/
|
#define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */
|
#define WL_ANT_RX_MAX 2 /* max 2 receive antennas */
|
#define WL_ANT_HT_RX_MAX 4 /* max 4 receive antennas/cores */
|
#define WL_ANT_IDX_1 0 /* antenna index 1 */
|
#define WL_ANT_IDX_2 1 /* antenna index 2 */
|
|
#ifndef WL_RSSI_ANT_MAX
|
#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */
|
#elif WL_RSSI_ANT_MAX != 4
|
#error "WL_RSSI_ANT_MAX does not match"
|
#endif
|
|
/* dfs_status iovar-related defines */
|
|
/* cac - channel availability check,
|
* ism - in-service monitoring
|
* csa - channel switching announcement
|
*/
|
|
/* cac state values */
|
#define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */
|
#define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */
|
#define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */
|
#define WL_DFS_CACSTATE_CSA 3 /* csa */
|
#define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */
|
#define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */
|
#define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */
|
#define WL_DFS_CACSTATES 7 /* this many states exist */
|
|
/* Defines used with channel_bandwidth for curpower */
|
#define WL_BW_20MHZ 0
|
#define WL_BW_40MHZ 1
|
#define WL_BW_80MHZ 2
|
#define WL_BW_160MHZ 3
|
#define WL_BW_8080MHZ 4
|
#define WL_BW_2P5MHZ 5
|
#define WL_BW_5MHZ 6
|
#define WL_BW_10MHZ 7
|
|
/* tx_power_t.flags bits */
|
#define WL_TX_POWER_F_ENABLED 1
|
#define WL_TX_POWER_F_HW 2
|
#define WL_TX_POWER_F_MIMO 4
|
#define WL_TX_POWER_F_SISO 8
|
#define WL_TX_POWER_F_HT 0x10
|
#define WL_TX_POWER_F_VHT 0x20
|
#define WL_TX_POWER_F_OPENLOOP 0x40
|
#define WL_TX_POWER_F_PROP11NRATES 0x80
|
#define WL_TX_POWER_F_UNIT_QDBM 0x100
|
/* Message levels */
|
#define WL_ERROR_VAL 0x00000001
|
#define WL_TRACE_VAL 0x00000002
|
#define WL_PRHDRS_VAL 0x00000004
|
#define WL_PRPKT_VAL 0x00000008
|
#define WL_INFORM_VAL 0x00000010
|
#define WL_TMP_VAL 0x00000020
|
#define WL_OID_VAL 0x00000040
|
#define WL_RATE_VAL 0x00000080
|
#define WL_ASSOC_VAL 0x00000100
|
#define WL_PRUSR_VAL 0x00000200
|
#define WL_PS_VAL 0x00000400
|
#define WL_TXPWR_VAL 0x00000000 /* retired in TOT on 6/10/2009 */
|
#define WL_MODE_SWITCH_VAL 0x00000800 /* Using retired TXPWR val */
|
#define WL_PORT_VAL 0x00001000
|
#define WL_DUAL_VAL 0x00002000
|
#define WL_WSEC_VAL 0x00004000
|
#define WL_WSEC_DUMP_VAL 0x00008000
|
#define WL_LOG_VAL 0x00010000
|
#define WL_NRSSI_VAL 0x00000000 /* retired in TOT on 6/10/2009 */
|
#define WL_BCNTRIM_VAL 0x00020000 /* Using retired NRSSI VAL */
|
#define WL_LOFT_VAL 0x00000000 /* retired in TOT on 6/10/2009 */
|
#define WL_PFN_VAL 0x00040000 /* Using retired LOFT_VAL */
|
#define WL_REGULATORY_VAL 0x00080000
|
#define WL_CSA_VAL 0x00080000 /* Reusing REGULATORY_VAL due to lackof bits */
|
#define WL_TAF_VAL 0x00100000
|
#define WL_RADAR_VAL 0x00000000 /* retired in TOT on 6/10/2009 */
|
#define WL_WDI_VAL 0x00200000 /* Using retired WL_RADAR_VAL VAL */
|
#define WL_MPC_VAL 0x00400000
|
#define WL_APSTA_VAL 0x00800000
|
#define WL_DFS_VAL 0x01000000
|
#define WL_BA_VAL 0x00000000 /* retired in TOT on 6/14/2010 */
|
#define WL_MUMIMO_VAL 0x02000000 /* Using retired WL_BA_VAL */
|
#define WL_ACI_VAL 0x04000000
|
#define WL_PRMAC_VAL 0x04000000
|
#define WL_MBSS_VAL 0x04000000
|
#define WL_CAC_VAL 0x08000000
|
#define WL_AMSDU_VAL 0x10000000
|
#define WL_AMPDU_VAL 0x20000000
|
#define WL_FFPLD_VAL 0x40000000
|
#define WL_ROAM_EXP_VAL 0x80000000
|
|
/* wl_msg_level is full. For new bits take the next one and AND with
|
* wl_msg_level2 in wl_dbg.h
|
*/
|
#define WL_DPT_VAL 0x00000001
|
/* re-using WL_DPT_VAL */
|
/* re-using WL_MESH_VAL */
|
#define WL_NATOE_VAL 0x00000001
|
#define WL_MESH_VAL 0x00000001
|
#define WL_SCAN_VAL 0x00000002
|
#define WL_WOWL_VAL 0x00000004
|
#define WL_COEX_VAL 0x00000008
|
#define WL_RTDC_VAL 0x00000010
|
#define WL_PROTO_VAL 0x00000020
|
#define WL_SWDIV_VAL 0x00000040
|
#define WL_CHANINT_VAL 0x00000080
|
#define WL_WMF_VAL 0x00000100
|
#define WL_P2P_VAL 0x00000200
|
#define WL_ITFR_VAL 0x00000400
|
#define WL_MCHAN_VAL 0x00000800
|
#define WL_TDLS_VAL 0x00001000
|
#define WL_MCNX_VAL 0x00002000
|
#define WL_PROT_VAL 0x00004000
|
#define WL_PSTA_VAL 0x00008000
|
#define WL_TSO_VAL 0x00010000
|
#define WL_TRF_MGMT_VAL 0x00020000
|
#define WL_LPC_VAL 0x00040000
|
#define WL_L2FILTER_VAL 0x00080000
|
#define WL_TXBF_VAL 0x00100000
|
#define WL_P2PO_VAL 0x00200000
|
#define WL_TBTT_VAL 0x00400000
|
#define WL_FBT_VAL 0x00800000
|
#define WL_RRM_VAL 0x00800000 /* reuse */
|
#define WL_MQ_VAL 0x01000000
|
|
/* This level is currently used in Phoenix2 only */
|
#define WL_SRSCAN_VAL 0x02000000
|
|
#define WL_WNM_VAL 0x04000000
|
/* re-using WL_WNM_VAL for MBO */
|
#define WL_MBO_VAL 0x04000000
|
#define WL_PWRSEL_VAL 0x10000000
|
#define WL_NET_DETECT_VAL 0x20000000
|
#define WL_OCE_VAL 0x20000000 /* reuse */
|
#define WL_PCIE_VAL 0x40000000
|
#define WL_PMDUR_VAL 0x80000000
|
|
|
/* use top-bit for WL_TIME_STAMP_VAL because this is a modifier
|
* rather than a message-type of its own
|
*/
|
#define WL_TIMESTAMP_VAL 0x80000000
|
|
/* max # of leds supported by GPIO (gpio pin# == led index#) */
|
#define WL_LED_NUMGPIO 32 /* gpio 0-31 */
|
|
/* led per-pin behaviors */
|
#define WL_LED_OFF 0 /* always off */
|
#define WL_LED_ON 1 /* always on */
|
#define WL_LED_ACTIVITY 2 /* activity */
|
#define WL_LED_RADIO 3 /* radio enabled */
|
#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */
|
#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */
|
#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */
|
#define WL_LED_WI1 7
|
#define WL_LED_WI2 8
|
#define WL_LED_WI3 9
|
#define WL_LED_ASSOC 10 /* associated state indicator */
|
#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */
|
#define WL_LED_ASSOCACT 12 /* on when associated; blink fast for activity */
|
#define WL_LED_WI4 13
|
#define WL_LED_WI5 14
|
#define WL_LED_BLINKSLOW 15 /* blink slow */
|
#define WL_LED_BLINKMED 16 /* blink med */
|
#define WL_LED_BLINKFAST 17 /* blink fast */
|
#define WL_LED_BLINKCUSTOM 18 /* blink custom */
|
#define WL_LED_BLINKPERIODIC 19 /* blink periodic (custom 1000ms / off 400ms) */
|
#define WL_LED_ASSOC_WITH_SEC 20 /* when connected with security */
|
/* keep on for 300 sec */
|
#define WL_LED_START_OFF 21 /* off upon boot, could be turned on later */
|
#define WL_LED_WI6 22
|
#define WL_LED_WI7 23
|
#define WL_LED_WI8 24
|
#define WL_LED_NUMBEHAVIOR 25
|
|
/* led behavior numeric value format */
|
#define WL_LED_BEH_MASK 0x3f /* behavior mask */
|
#define WL_LED_PMU_OVERRIDE 0x40 /* need to set PMU Override bit for the GPIO */
|
#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */
|
|
/* number of bytes needed to define a proper bit mask for MAC event reporting */
|
#define BCMIO_ROUNDUP(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
|
#define BCMIO_NBBY 8
|
#define WL_EVENTING_MASK_LEN (16+4)
|
|
#define WL_EVENTING_MASK_EXT_LEN \
|
MAX(WL_EVENTING_MASK_LEN, (ROUNDUP(WLC_E_LAST, NBBY)/NBBY))
|
|
/* join preference types */
|
#define WL_JOIN_PREF_RSSI 1 /* by RSSI */
|
#define WL_JOIN_PREF_WPA 2 /* by akm and ciphers */
|
#define WL_JOIN_PREF_BAND 3 /* by 802.11 band */
|
#define WL_JOIN_PREF_RSSI_DELTA 4 /* by 802.11 band only if RSSI delta condition matches */
|
#define WL_JOIN_PREF_TRANS_PREF 5 /* defined by requesting AP */
|
|
/* band preference */
|
#define WLJP_BAND_ASSOC_PREF 255 /* use what WLC_SET_ASSOC_PREFER ioctl specifies */
|
|
/* any multicast cipher suite */
|
#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00"
|
|
/* 802.11h measurement types */
|
#define WLC_MEASURE_TPC 1
|
#define WLC_MEASURE_CHANNEL_BASIC 2
|
#define WLC_MEASURE_CHANNEL_CCA 3
|
#define WLC_MEASURE_CHANNEL_RPI 4
|
|
/* regulatory enforcement levels */
|
#define SPECT_MNGMT_OFF 0 /* both 11h and 11d disabled */
|
#define SPECT_MNGMT_LOOSE_11H 1 /* allow non-11h APs in scan lists */
|
#define SPECT_MNGMT_STRICT_11H 2 /* prune out non-11h APs from scan list */
|
#define SPECT_MNGMT_STRICT_11D 3 /* switch to 802.11D mode */
|
/* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE
|
* adoption is done regardless of capability spectrum_management
|
*/
|
#define SPECT_MNGMT_LOOSE_11H_D 4 /* operation defined above */
|
|
/* bit position in per_chan_info; these depend on current country/regulatory domain */
|
#define WL_CHAN_VALID_HW (1 << 0) /* valid with current HW */
|
#define WL_CHAN_VALID_SW (1 << 1) /* valid with current country setting */
|
#define WL_CHAN_BAND_5G (1 << 2) /* 5GHz-band channel */
|
#define WL_CHAN_RADAR (1 << 3) /* radar sensitive channel */
|
#define WL_CHAN_INACTIVE (1 << 4) /* temporarily inactive due to radar */
|
#define WL_CHAN_PASSIVE (1 << 5) /* channel is in passive mode */
|
#define WL_CHAN_RESTRICTED (1 << 6) /* restricted use channel */
|
#define WL_CHAN_RADAR_EU_WEATHER (1 << 7) /* EU Radar weather channel. Implies an
|
* EU Radar channel.
|
*/
|
#define WL_CHAN_CLM_RESTRICTED (1 << 8) /* channel restricted in CLM
|
* (i.e. by default)
|
*/
|
|
/* following definition is for precommit; will be removed once wl, acsd switch to the new def */
|
#define WL_CHAN_WEATHER_RADAR WL_CHAN_RADAR_EU_WEATHER
|
|
/* BTC mode used by "btc_mode" iovar */
|
#define WL_BTC_DISABLE 0 /* disable BT coexistence */
|
#define WL_BTC_FULLTDM 1 /* full TDM COEX */
|
#define WL_BTC_ENABLE 1 /* full TDM COEX to maintain backward compatiblity */
|
#define WL_BTC_PREMPT 2 /* full TDM COEX with preemption */
|
#define WL_BTC_LITE 3 /* light weight coex for large isolation platform */
|
#define WL_BTC_PARALLEL 4 /* BT and WLAN run in parallel with separate antenna */
|
#define WL_BTC_HYBRID 5 /* hybrid coex, only ack is allowed to transmit in BT slot */
|
#define WL_BTC_DEFAULT 8 /* set the default mode for the device */
|
#define WL_INF_BTC_DISABLE 0
|
#define WL_INF_BTC_ENABLE 1
|
#define WL_INF_BTC_AUTO 3
|
|
/* BTC wire used by "btc_wire" iovar */
|
#define WL_BTC_DEFWIRE 0 /* use default wire setting */
|
#define WL_BTC_2WIRE 2 /* use 2-wire BTC */
|
#define WL_BTC_3WIRE 3 /* use 3-wire BTC */
|
#define WL_BTC_4WIRE 4 /* use 4-wire BTC */
|
|
/* BTC flags: BTC configuration that can be set by host */
|
#define WL_BTC_FLAG_PREMPT (1 << 0)
|
#define WL_BTC_FLAG_BT_DEF (1 << 1)
|
#define WL_BTC_FLAG_ACTIVE_PROT (1 << 2)
|
#define WL_BTC_FLAG_SIM_RSP (1 << 3)
|
#define WL_BTC_FLAG_PS_PROTECT (1 << 4)
|
#define WL_BTC_FLAG_SIM_TX_LP (1 << 5)
|
#define WL_BTC_FLAG_ECI (1 << 6)
|
#define WL_BTC_FLAG_LIGHT (1 << 7)
|
#define WL_BTC_FLAG_PARALLEL (1 << 8)
|
|
/* maximum channels returned by the get valid channels iovar */
|
#define WL_NUMCHANNELS 64
|
|
/* max number of chanspecs (used by the iovar to calc. buf space) */
|
#ifdef WL11AC_80P80
|
#define WL_NUMCHANSPECS 206
|
#else
|
#define WL_NUMCHANSPECS 110
|
#endif
|
|
/* WDS link local endpoint WPA role */
|
#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
|
#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
|
#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
|
|
/* Base offset values */
|
#define WL_PKT_FILTER_BASE_PKT 0
|
#define WL_PKT_FILTER_BASE_END 1
|
#define WL_PKT_FILTER_BASE_D11_H 2 /* May be removed */
|
#define WL_PKT_FILTER_BASE_D11_D 3 /* May be removed */
|
#define WL_PKT_FILTER_BASE_ETH_H 4
|
#define WL_PKT_FILTER_BASE_ETH_D 5
|
#define WL_PKT_FILTER_BASE_ARP_H 6
|
#define WL_PKT_FILTER_BASE_ARP_D 7 /* May be removed */
|
#define WL_PKT_FILTER_BASE_IP4_H 8
|
#define WL_PKT_FILTER_BASE_IP4_D 9
|
#define WL_PKT_FILTER_BASE_IP6_H 10
|
#define WL_PKT_FILTER_BASE_IP6_D 11
|
#define WL_PKT_FILTER_BASE_TCP_H 12
|
#define WL_PKT_FILTER_BASE_TCP_D 13 /* May be removed */
|
#define WL_PKT_FILTER_BASE_UDP_H 14
|
#define WL_PKT_FILTER_BASE_UDP_D 15
|
#define WL_PKT_FILTER_BASE_IP6_P 16
|
#define WL_PKT_FILTER_BASE_COUNT 17 /* May be removed */
|
|
/* String mapping for bases that may be used by applications or debug */
|
#define WL_PKT_FILTER_BASE_NAMES \
|
{ "START", WL_PKT_FILTER_BASE_PKT }, \
|
{ "END", WL_PKT_FILTER_BASE_END }, \
|
{ "ETH_H", WL_PKT_FILTER_BASE_ETH_H }, \
|
{ "ETH_D", WL_PKT_FILTER_BASE_ETH_D }, \
|
{ "D11_H", WL_PKT_FILTER_BASE_D11_H }, \
|
{ "D11_D", WL_PKT_FILTER_BASE_D11_D }, \
|
{ "ARP_H", WL_PKT_FILTER_BASE_ARP_H }, \
|
{ "IP4_H", WL_PKT_FILTER_BASE_IP4_H }, \
|
{ "IP4_D", WL_PKT_FILTER_BASE_IP4_D }, \
|
{ "IP6_H", WL_PKT_FILTER_BASE_IP6_H }, \
|
{ "IP6_D", WL_PKT_FILTER_BASE_IP6_D }, \
|
{ "IP6_P", WL_PKT_FILTER_BASE_IP6_P }, \
|
{ "TCP_H", WL_PKT_FILTER_BASE_TCP_H }, \
|
{ "TCP_D", WL_PKT_FILTER_BASE_TCP_D }, \
|
{ "UDP_H", WL_PKT_FILTER_BASE_UDP_H }, \
|
{ "UDP_D", WL_PKT_FILTER_BASE_UDP_D }
|
|
/* Flags for a pattern list element */
|
#define WL_PKT_FILTER_MFLAG_NEG 0x0001
|
|
/*
|
* Packet engine interface
|
*/
|
|
#define WL_PKTENG_PER_TX_START 0x01
|
#define WL_PKTENG_PER_TX_STOP 0x02
|
#define WL_PKTENG_PER_RX_START 0x04
|
#define WL_PKTENG_PER_RX_WITH_ACK_START 0x05
|
#define WL_PKTENG_PER_TX_WITH_ACK_START 0x06
|
#define WL_PKTENG_PER_RX_STOP 0x08
|
#define WL_PKTENG_PER_RU_TX_START 0x09
|
#define WL_PKTENG_PER_MASK 0xff
|
|
#define WL_PKTENG_SYNCHRONOUS 0x100 /* synchronous flag */
|
#define WL_PKTENG_SYNCHRONOUS_UNBLK 0x200 /* synchronous unblock flag */
|
#ifdef PKTENG_LONGPKTSZ
|
/* max pktsz limit for pkteng */
|
#define WL_PKTENG_MAXPKTSZ PKTENG_LONGPKTSZ
|
#else
|
#define WL_PKTENG_MAXPKTSZ 16384
|
#endif
|
|
#define NUM_80211b_RATES 4
|
#define NUM_80211ag_RATES 8
|
#define NUM_80211n_RATES 32
|
#define NUM_80211_RATES (NUM_80211b_RATES+NUM_80211ag_RATES+NUM_80211n_RATES)
|
|
/*
|
* WOWL capability/override settings
|
*/
|
#define WL_WOWL_MAGIC (1 << 0) /* Wakeup on Magic packet */
|
#define WL_WOWL_NET (1 << 1) /* Wakeup on Netpattern */
|
#define WL_WOWL_DIS (1 << 2) /* Wakeup on loss-of-link due to Disassoc/Deauth */
|
#define WL_WOWL_RETR (1 << 3) /* Wakeup on retrograde TSF */
|
#define WL_WOWL_BCN (1 << 4) /* Wakeup on loss of beacon */
|
#define WL_WOWL_TST (1 << 5) /* Wakeup after test */
|
#define WL_WOWL_M1 (1 << 6) /* Wakeup after PTK refresh */
|
#define WL_WOWL_EAPID (1 << 7) /* Wakeup after receipt of EAP-Identity Req */
|
#define WL_WOWL_PME_GPIO (1 << 8) /* Wakeind via PME(0) or GPIO(1) */
|
#define WL_WOWL_ULP_BAILOUT (1 << 8) /* wakeind via unknown pkt by basic ULP-offloads -
|
* WL_WOWL_ULP_BAILOUT - same as WL_WOWL_PME_GPIO used only for DONGLE BUILDS
|
*/
|
#define WL_WOWL_NEEDTKIP1 (1 << 9) /* need tkip phase 1 key to be updated by the driver */
|
#define WL_WOWL_GTK_FAILURE (1 << 10) /* enable wakeup if GTK fails */
|
#define WL_WOWL_EXTMAGPAT (1 << 11) /* support extended magic packets */
|
#define WL_WOWL_ARPOFFLOAD (1 << 12) /* support ARP/NS/keepalive offloading */
|
#define WL_WOWL_WPA2 (1 << 13) /* read protocol version for EAPOL frames */
|
#define WL_WOWL_KEYROT (1 << 14) /* If the bit is set, use key rotaton */
|
#define WL_WOWL_BCAST (1 << 15) /* If the bit is set, frm received was bcast frame */
|
#define WL_WOWL_SCANOL (1 << 16) /* If the bit is set, scan offload is enabled */
|
#define WL_WOWL_TCPKEEP_TIME (1 << 17) /* Wakeup on tcpkeep alive timeout */
|
#define WL_WOWL_MDNS_CONFLICT (1 << 18) /* Wakeup on mDNS Conflict Resolution */
|
#define WL_WOWL_MDNS_SERVICE (1 << 19) /* Wakeup on mDNS Service Connect */
|
#define WL_WOWL_TCPKEEP_DATA (1 << 20) /* tcp keepalive got data */
|
#define WL_WOWL_FW_HALT (1 << 21) /* Firmware died in wowl mode */
|
#define WL_WOWL_ENAB_HWRADIO (1 << 22) /* Enable detection of radio button changes */
|
#define WL_WOWL_MIC_FAIL (1 << 23) /* Offloads detected MIC failure(s) */
|
#define WL_WOWL_UNASSOC (1 << 24) /* Wakeup in Unassociated state (Net/Magic Pattern) */
|
#define WL_WOWL_SECURE (1 << 25) /* Wakeup if received matched secured pattern */
|
#define WL_WOWL_EXCESS_WAKE (1 << 26) /* Excess wake */
|
#define WL_WOWL_LINKDOWN (1 << 31) /* Link Down indication in WoWL mode */
|
|
#define WL_WOWL_TCPKEEP (1 << 20) /* temp copy to satisfy automerger */
|
#define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */
|
|
#define WOWL_PATTEN_TYPE_ARP (1 << 0) /* ARP offload Pattern */
|
#define WOWL_PATTEN_TYPE_NA (1 << 1) /* NA offload Pattern */
|
|
#define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */
|
#define MAGIC_PKT_NUM_MAC_ADDRS 16
|
|
/* Overlap BSS Scan parameters default, minimum, maximum */
|
#define WLC_OBSS_SCAN_PASSIVE_DWELL_DEFAULT 20 /* unit TU */
|
#define WLC_OBSS_SCAN_PASSIVE_DWELL_MIN 5 /* unit TU */
|
#define WLC_OBSS_SCAN_PASSIVE_DWELL_MAX 1000 /* unit TU */
|
#define WLC_OBSS_SCAN_ACTIVE_DWELL_DEFAULT 10 /* unit TU */
|
#define WLC_OBSS_SCAN_ACTIVE_DWELL_MIN 10 /* unit TU */
|
#define WLC_OBSS_SCAN_ACTIVE_DWELL_MAX 1000 /* unit TU */
|
#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_DEFAULT 300 /* unit Sec */
|
#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MIN 10 /* unit Sec */
|
#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MAX 900 /* unit Sec */
|
#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_DEFAULT 5
|
#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MIN 5
|
#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MAX 100
|
#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_DEFAULT 200 /* unit TU */
|
#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MIN 200 /* unit TU */
|
#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */
|
#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_DEFAULT 20 /* unit TU */
|
#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MIN 20 /* unit TU */
|
#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */
|
#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_DEFAULT 25 /* unit percent */
|
#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MIN 0 /* unit percent */
|
#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MAX 100 /* unit percent */
|
|
#define WL_MIN_NUM_OBSS_SCAN_ARG 7 /* minimum number of arguments required for OBSS Scan */
|
|
#define WL_COEX_INFO_MASK 0x07
|
#define WL_COEX_INFO_REQ 0x01
|
#define WL_COEX_40MHZ_INTOLERANT 0x02
|
#define WL_COEX_WIDTH20 0x04
|
|
#define WLC_RSSI_INVALID 0 /* invalid RSSI value */
|
|
#define MAX_RSSI_LEVELS 8
|
|
/* **** EXTLOG **** */
|
#define EXTLOG_CUR_VER 0x0100
|
|
#define MAX_ARGSTR_LEN 18 /* At least big enough for storing ETHER_ADDR_STR_LEN */
|
|
/* log modules (bitmap) */
|
#define LOG_MODULE_COMMON 0x0001
|
#define LOG_MODULE_ASSOC 0x0002
|
#define LOG_MODULE_EVENT 0x0004
|
#define LOG_MODULE_MAX 3 /* Update when adding module */
|
|
/* log levels */
|
#define WL_LOG_LEVEL_DISABLE 0
|
#define WL_LOG_LEVEL_ERR 1
|
#define WL_LOG_LEVEL_WARN 2
|
#define WL_LOG_LEVEL_INFO 3
|
#define WL_LOG_LEVEL_MAX WL_LOG_LEVEL_INFO /* Update when adding level */
|
|
/* flag */
|
#define LOG_FLAG_EVENT 1
|
|
/* log arg_type */
|
#define LOG_ARGTYPE_NULL 0
|
#define LOG_ARGTYPE_STR 1 /* %s */
|
#define LOG_ARGTYPE_INT 2 /* %d */
|
#define LOG_ARGTYPE_INT_STR 3 /* %d...%s */
|
#define LOG_ARGTYPE_STR_INT 4 /* %s...%d */
|
|
/* 802.11 Mgmt Packet flags */
|
#define VNDR_IE_BEACON_FLAG 0x1
|
#define VNDR_IE_PRBRSP_FLAG 0x2
|
#define VNDR_IE_ASSOCRSP_FLAG 0x4
|
#define VNDR_IE_AUTHRSP_FLAG 0x8
|
#define VNDR_IE_PRBREQ_FLAG 0x10
|
#define VNDR_IE_ASSOCREQ_FLAG 0x20
|
#define VNDR_IE_IWAPID_FLAG 0x40 /* vendor IE in IW advertisement protocol ID field */
|
#define VNDR_IE_AUTHREQ_FLAG 0x80
|
#define VNDR_IE_CUSTOM_FLAG 0x100 /* allow custom IE id */
|
#define VNDR_IE_DISASSOC_FLAG 0x200
|
|
#if defined(WLP2P)
|
/* P2P Action Frames flags (spec ordered) */
|
#define VNDR_IE_GONREQ_FLAG 0x001000
|
#define VNDR_IE_GONRSP_FLAG 0x002000
|
#define VNDR_IE_GONCFM_FLAG 0x004000
|
#define VNDR_IE_INVREQ_FLAG 0x008000
|
#define VNDR_IE_INVRSP_FLAG 0x010000
|
#define VNDR_IE_DISREQ_FLAG 0x020000
|
#define VNDR_IE_DISRSP_FLAG 0x040000
|
#define VNDR_IE_PRDREQ_FLAG 0x080000
|
#define VNDR_IE_PRDRSP_FLAG 0x100000
|
|
#define VNDR_IE_P2PAF_SHIFT 12
|
#endif /* WLP2P */
|
|
/* channel interference measurement (chanim) related defines */
|
|
/* chanim mode */
|
#define CHANIM_DISABLE 0 /* disabled */
|
#define CHANIM_DETECT 1 /* detection only */
|
#define CHANIM_EXT 2 /* external state machine */
|
#define CHANIM_ACT 3 /* full internal state machine, detect + act */
|
#define CHANIM_MODE_MAX 4
|
|
/* define for apcs reason code */
|
#define APCS_INIT 0
|
#define APCS_IOCTL 1
|
#define APCS_CHANIM 2
|
#define APCS_CSTIMER 3
|
#define APCS_TXDLY 5
|
#define APCS_NONACSD 6
|
#define APCS_DFS_REENTRY 7
|
#define APCS_TXFAIL 8
|
#define APCS_MAX 9
|
|
/* number of ACS record entries */
|
#define CHANIM_ACS_RECORD 10
|
|
/* CHANIM */
|
#define CCASTATS_TXDUR 0
|
#define CCASTATS_INBSS 1
|
#define CCASTATS_OBSS 2
|
#define CCASTATS_NOCTG 3
|
#define CCASTATS_NOPKT 4
|
#define CCASTATS_DOZE 5
|
#define CCASTATS_TXOP 6
|
#define CCASTATS_GDTXDUR 7
|
#define CCASTATS_BDTXDUR 8
|
|
#ifndef WLCHANIM_V2
|
#define CCASTATS_MAX 9
|
#else /* WLCHANIM_V2 */
|
#define CCASTATS_MYRX 9
|
#define CCASTATS_MAX 10
|
#endif /* WLCHANIM_V2 */
|
|
#define WL_CHANIM_COUNT_ALL 0xff
|
#define WL_CHANIM_COUNT_ONE 0x1
|
|
/* ap tpc modes */
|
#define AP_TPC_OFF 0
|
#define AP_TPC_BSS_PWR 1 /* BSS power control */
|
#define AP_TPC_AP_PWR 2 /* AP power control */
|
#define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */
|
#define AP_TPC_MAX_LINK_MARGIN 127
|
|
/* ap tpc modes */
|
#define AP_TPC_OFF 0
|
#define AP_TPC_BSS_PWR 1 /* BSS power control */
|
#define AP_TPC_AP_PWR 2 /* AP power control */
|
#define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */
|
#define AP_TPC_MAX_LINK_MARGIN 127
|
|
/* state */
|
#define WL_P2P_DISC_ST_SCAN 0
|
#define WL_P2P_DISC_ST_LISTEN 1
|
#define WL_P2P_DISC_ST_SEARCH 2
|
|
/* i/f type */
|
#define WL_P2P_IF_CLIENT 0
|
#define WL_P2P_IF_GO 1
|
#define WL_P2P_IF_DYNBCN_GO 2
|
#define WL_P2P_IF_DEV 3
|
|
/* count */
|
#define WL_P2P_SCHED_RSVD 0
|
#define WL_P2P_SCHED_REPEAT 255 /* anything > 255 will be treated as 255 */
|
|
#define WL_P2P_SCHED_FIXED_LEN 3
|
|
/* schedule type */
|
#define WL_P2P_SCHED_TYPE_ABS 0 /* Scheduled Absence */
|
#define WL_P2P_SCHED_TYPE_REQ_ABS 1 /* Requested Absence */
|
|
/* schedule action during absence periods (for WL_P2P_SCHED_ABS type) */
|
#define WL_P2P_SCHED_ACTION_NONE 0 /* no action */
|
#define WL_P2P_SCHED_ACTION_DOZE 1 /* doze */
|
/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */
|
#define WL_P2P_SCHED_ACTION_GOOFF 2 /* turn off GO beacon/prbrsp functions */
|
/* schedule option - WL_P2P_SCHED_TYPE_XXX */
|
#define WL_P2P_SCHED_ACTION_RESET 255 /* reset */
|
|
/* schedule option - WL_P2P_SCHED_TYPE_ABS */
|
#define WL_P2P_SCHED_OPTION_NORMAL 0 /* normal start/interval/duration/count */
|
#define WL_P2P_SCHED_OPTION_BCNPCT 1 /* percentage of beacon interval */
|
/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */
|
#define WL_P2P_SCHED_OPTION_TSFOFS 2 /* normal start/internal/duration/count with
|
* start being an offset of the 'current' TSF
|
*/
|
|
/* feature flags */
|
#define WL_P2P_FEAT_GO_CSA (1 << 0) /* GO moves with the STA using CSA method */
|
#define WL_P2P_FEAT_GO_NOLEGACY (1 << 1) /* GO does not probe respond to non-p2p probe
|
* requests
|
*/
|
#define WL_P2P_FEAT_RESTRICT_DEV_RESP (1 << 2) /* Restrict p2p dev interface from responding */
|
|
/* n-mode support capability */
|
/* 2x2 includes both 1x1 & 2x2 devices
|
* reserved #define 2 for future when we want to separate 1x1 & 2x2 and
|
* control it independently
|
*/
|
#define WL_11N_2x2 1
|
#define WL_11N_3x3 3
|
#define WL_11N_4x4 4
|
|
/* define 11n feature disable flags */
|
#define WLFEATURE_DISABLE_11N 0x00000001
|
#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002
|
#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004
|
#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008
|
#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010
|
#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020
|
#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040
|
#define WLFEATURE_DISABLE_11N_GF 0x00000080
|
|
/* Proxy STA modes */
|
#define PSTA_MODE_DISABLED 0
|
#define PSTA_MODE_PROXY 1
|
#define PSTA_MODE_REPEATER 2
|
|
/* op code in nat_cfg */
|
#define NAT_OP_ENABLE 1 /* enable NAT on given interface */
|
#define NAT_OP_DISABLE 2 /* disable NAT on given interface */
|
#define NAT_OP_DISABLE_ALL 3 /* disable NAT on all interfaces */
|
|
/* NAT state */
|
#define NAT_STATE_ENABLED 1 /* NAT is enabled */
|
#define NAT_STATE_DISABLED 2 /* NAT is disabled */
|
|
#define CHANNEL_5G_LOW_START 36 /* 5G low (36..48) CDD enable/disable bit mask */
|
#define CHANNEL_5G_MID_START 52 /* 5G mid (52..64) CDD enable/disable bit mask */
|
#define CHANNEL_5G_HIGH_START 100 /* 5G high (100..140) CDD enable/disable bit mask */
|
#define CHANNEL_5G_UPPER_START 149 /* 5G upper (149..161) CDD enable/disable bit mask */
|
|
/* D0 Coalescing */
|
#define IPV4_ARP_FILTER 0x0001
|
#define IPV4_NETBT_FILTER 0x0002
|
#define IPV4_LLMNR_FILTER 0x0004
|
#define IPV4_SSDP_FILTER 0x0008
|
#define IPV4_WSD_FILTER 0x0010
|
#define IPV6_NETBT_FILTER 0x0200
|
#define IPV6_LLMNR_FILTER 0x0400
|
#define IPV6_SSDP_FILTER 0x0800
|
#define IPV6_WSD_FILTER 0x1000
|
|
/* Network Offload Engine */
|
#define NWOE_OL_ENABLE 0x00000001
|
|
/*
|
* Traffic management structures/defines.
|
*/
|
|
/* Traffic management bandwidth parameters */
|
#define TRF_MGMT_MAX_PRIORITIES 3
|
|
#define TRF_MGMT_FLAG_ADD_DSCP 0x0001 /* Add DSCP to IP TOS field */
|
#define TRF_MGMT_FLAG_DISABLE_SHAPING 0x0002 /* Don't shape traffic */
|
#define TRF_MGMT_FLAG_MANAGE_LOCAL_TRAFFIC 0x0008 /* Manage traffic over our local subnet */
|
#define TRF_MGMT_FLAG_FILTER_ON_MACADDR 0x0010 /* filter on MAC address */
|
#define TRF_MGMT_FLAG_NO_RX 0x0020 /* do not apply fiters to rx packets */
|
|
#define TRF_FILTER_MAC_ADDR 0x0001 /* L2 filter use dst mac address for filtering */
|
#define TRF_FILTER_IP_ADDR 0x0002 /* L3 filter use ip ddress for filtering */
|
#define TRF_FILTER_L4 0x0004 /* L4 filter use tcp/udp for filtering */
|
#define TRF_FILTER_DWM 0x0008 /* L3 filter use DSCP for filtering */
|
#define TRF_FILTER_FAVORED 0x0010 /* Tag the packet FAVORED */
|
|
/* WNM/NPS subfeatures mask */
|
#define WL_WNM_BSSTRANS 0x00000001
|
#define WL_WNM_PROXYARP 0x00000002
|
#define WL_WNM_MAXIDLE 0x00000004
|
#define WL_WNM_TIMBC 0x00000008
|
#define WL_WNM_TFS 0x00000010
|
#define WL_WNM_SLEEP 0x00000020
|
#define WL_WNM_DMS 0x00000040
|
#define WL_WNM_FMS 0x00000080
|
#define WL_WNM_NOTIF 0x00000100
|
#define WL_WNM_WBTEXT 0x00000200
|
#define WL_WNM_MAX 0x00000400
|
#ifdef WLWNM_BRCM
|
#define BRCM_WNM_FEATURE_SET\
|
(WL_WNM_PROXYARP | \
|
WL_WNM_SLEEP | \
|
WL_WNM_FMS | \
|
WL_WNM_TFS | \
|
WL_WNM_TIMBC | \
|
WL_WNM_BSSTRANS | \
|
WL_WNM_DMS | \
|
WL_WNM_NOTIF | \
|
0)
|
#endif /* WLWNM_BRCM */
|
#ifndef ETHER_MAX_DATA
|
#define ETHER_MAX_DATA 1500
|
#endif /* ETHER_MAX_DATA */
|
|
/* Different discovery modes for dpt */
|
#define DPT_DISCOVERY_MANUAL 0x01 /* manual discovery mode */
|
#define DPT_DISCOVERY_AUTO 0x02 /* auto discovery mode */
|
#define DPT_DISCOVERY_SCAN 0x04 /* scan-based discovery mode */
|
|
/* different path selection values */
|
#define DPT_PATHSEL_AUTO 0 /* auto mode for path selection */
|
#define DPT_PATHSEL_DIRECT 1 /* always use direct DPT path */
|
#define DPT_PATHSEL_APPATH 2 /* always use AP path */
|
|
/* different ops for deny list */
|
#define DPT_DENY_LIST_ADD 1 /* add to dpt deny list */
|
#define DPT_DENY_LIST_REMOVE 2 /* remove from dpt deny list */
|
|
/* different ops for manual end point */
|
#define DPT_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */
|
#define DPT_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */
|
#define DPT_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */
|
|
/* flags to indicate DPT status */
|
#define DPT_STATUS_ACTIVE 0x01 /* link active (though may be suspended) */
|
#define DPT_STATUS_AES 0x02 /* link secured through AES encryption */
|
#define DPT_STATUS_FAILED 0x04 /* DPT link failed */
|
|
#ifdef WLTDLS
|
/* different ops for manual end point */
|
#define TDLS_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */
|
#define TDLS_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */
|
#define TDLS_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */
|
#define TDLS_MANUAL_EP_PM 4 /* put dpt endpoint in PM mode */
|
#define TDLS_MANUAL_EP_WAKE 5 /* wake up dpt endpoint from PM */
|
#define TDLS_MANUAL_EP_DISCOVERY 6 /* discover if endpoint is TDLS capable */
|
#define TDLS_MANUAL_EP_CHSW 7 /* channel switch */
|
#define TDLS_MANUAL_EP_WFD_TPQ 8 /* WiFi-Display Tunneled Probe reQuest */
|
|
/* modes */
|
#define TDLS_WFD_IE_TX 0
|
#define TDLS_WFD_IE_RX 1
|
#define TDLS_WFD_PROBE_IE_TX 2
|
#define TDLS_WFD_PROBE_IE_RX 3
|
#endif /* WLTDLS */
|
|
/* define for flag */
|
#define TSPEC_PENDING 0 /* TSPEC pending */
|
#define TSPEC_ACCEPTED 1 /* TSPEC accepted */
|
#define TSPEC_REJECTED 2 /* TSPEC rejected */
|
#define TSPEC_UNKNOWN 3 /* TSPEC unknown */
|
#define TSPEC_STATUS_MASK 7 /* TSPEC status mask */
|
|
|
/* Software feature flag defines used by wlfeatureflag */
|
#ifdef WLAFTERBURNER
|
#define WL_SWFL_ABBFL 0x0001 /* Allow Afterburner on systems w/o hardware BFL */
|
#define WL_SWFL_ABENCORE 0x0002 /* Allow AB on non-4318E chips */
|
#endif /* WLAFTERBURNER */
|
#define WL_SWFL_NOHWRADIO 0x0004
|
#define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */
|
#define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */
|
|
#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */
|
|
#define CSA_BROADCAST_ACTION_FRAME 0 /* csa broadcast action frame */
|
#define CSA_UNICAST_ACTION_FRAME 1 /* csa unicast action frame */
|
|
/* Roaming trigger definitions for WLC_SET_ROAM_TRIGGER.
|
*
|
* (-100 < value < 0) value is used directly as a roaming trigger in dBm
|
* (0 <= value) value specifies a logical roaming trigger level from
|
* the list below
|
*
|
* WLC_GET_ROAM_TRIGGER always returns roaming trigger value in dBm, never
|
* the logical roam trigger value.
|
*/
|
#define WLC_ROAM_TRIGGER_DEFAULT 0 /* default roaming trigger */
|
#define WLC_ROAM_TRIGGER_BANDWIDTH 1 /* optimize for bandwidth roaming trigger */
|
#define WLC_ROAM_TRIGGER_DISTANCE 2 /* optimize for distance roaming trigger */
|
#define WLC_ROAM_TRIGGER_AUTO 3 /* auto-detect environment */
|
#define WLC_ROAM_TRIGGER_MAX_VALUE 3 /* max. valid value */
|
|
#define WLC_ROAM_NEVER_ROAM_TRIGGER (-100) /* Avoid Roaming by setting a large value */
|
|
/* Preferred Network Offload (PNO, formerly PFN) defines */
|
#define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */
|
|
#define SORT_CRITERIA_BIT 0
|
#define AUTO_NET_SWITCH_BIT 1
|
#define ENABLE_BKGRD_SCAN_BIT 2
|
#define IMMEDIATE_SCAN_BIT 3
|
#define AUTO_CONNECT_BIT 4
|
#define ENABLE_BD_SCAN_BIT 5
|
#define ENABLE_ADAPTSCAN_BIT 6
|
#define IMMEDIATE_EVENT_BIT 8
|
#define SUPPRESS_SSID_BIT 9
|
#define ENABLE_NET_OFFLOAD_BIT 10
|
/* report found/lost events for SSID and BSSID networks seperately */
|
#define REPORT_SEPERATELY_BIT 11
|
#define BESTN_BSSID_ONLY_BIT 12
|
|
#define SORT_CRITERIA_MASK 0x0001
|
#define AUTO_NET_SWITCH_MASK 0x0002
|
#define ENABLE_BKGRD_SCAN_MASK 0x0004
|
#define IMMEDIATE_SCAN_MASK 0x0008
|
#define AUTO_CONNECT_MASK 0x0010
|
|
#define ENABLE_BD_SCAN_MASK 0x0020
|
#define ENABLE_ADAPTSCAN_MASK 0x00c0
|
#define IMMEDIATE_EVENT_MASK 0x0100
|
#define SUPPRESS_SSID_MASK 0x0200
|
#define ENABLE_NET_OFFLOAD_MASK 0x0400
|
/* report found/lost events for SSID and BSSID networks seperately */
|
#define REPORT_SEPERATELY_MASK 0x0800
|
#define BESTN_BSSID_ONLY_MASK 0x1000
|
|
#define PFN_VERSION 2
|
#ifdef PFN_SCANRESULT_2
|
#define PFN_SCANRESULT_VERSION 2
|
#else
|
#define PFN_SCANRESULT_VERSION 1
|
#endif /* PFN_SCANRESULT_2 */
|
#ifndef MAX_PFN_LIST_COUNT
|
#define MAX_PFN_LIST_COUNT 16
|
#endif /* MAX_PFN_LIST_COUNT */
|
|
#define PFN_COMPLETE 1
|
#define PFN_INCOMPLETE 0
|
|
#define DEFAULT_BESTN 2
|
#define DEFAULT_MSCAN 0
|
#define DEFAULT_REPEAT 10
|
#define DEFAULT_EXP 2
|
|
#define PFN_PARTIAL_SCAN_BIT 0
|
#define PFN_PARTIAL_SCAN_MASK 1
|
|
#define WL_PFN_SUPPRESSFOUND_MASK 0x08
|
#define WL_PFN_SUPPRESSLOST_MASK 0x10
|
#define WL_PFN_SSID_A_BAND_TRIG 0x20
|
#define WL_PFN_SSID_BG_BAND_TRIG 0x40
|
#define WL_PFN_SSID_IMPRECISE_MATCH 0x80
|
#define WL_PFN_SSID_SAME_NETWORK 0x10000
|
#define WL_PFN_SUPPRESS_AGING_MASK 0x20000
|
#define WL_PFN_FLUSH_ALL_SSIDS 0x40000
|
#define WL_PFN_RSSI_MASK 0xff00
|
#define WL_PFN_RSSI_SHIFT 8
|
|
#define WL_PFN_REPORT_ALLNET 0
|
#define WL_PFN_REPORT_SSIDNET 1
|
#define WL_PFN_REPORT_BSSIDNET 2
|
|
#define WL_PFN_CFG_FLAGS_PROHIBITED 0x00000001 /* Accept and use prohibited channels */
|
#define WL_PFN_CFG_FLAGS_HISTORY_OFF 0x00000002 /* Scan history suppressed */
|
|
#define WL_PFN_HIDDEN_BIT 2
|
#define PNO_SCAN_MAX_FW 508*1000 /* max time scan time in msec */
|
#define PNO_SCAN_MAX_FW_SEC PNO_SCAN_MAX_FW/1000 /* max time scan time in SEC */
|
#define PNO_SCAN_MIN_FW_SEC 10 /* min time scan time in SEC */
|
#define WL_PFN_HIDDEN_MASK 0x4
|
#define MAX_SSID_WHITELIST_NUM 4
|
#define MAX_BSSID_PREF_LIST_NUM 32
|
#define MAX_BSSID_BLACKLIST_NUM 32
|
|
#ifndef BESTN_MAX
|
#define BESTN_MAX 10
|
#endif
|
|
#ifndef MSCAN_MAX
|
#define MSCAN_MAX 32
|
#endif
|
|
/* TCP Checksum Offload error injection for testing */
|
#define TOE_ERRTEST_TX_CSUM 0x00000001
|
#define TOE_ERRTEST_RX_CSUM 0x00000002
|
#define TOE_ERRTEST_RX_CSUM2 0x00000004
|
|
/* ARP Offload feature flags for arp_ol iovar */
|
#define ARP_OL_AGENT 0x00000001
|
#define ARP_OL_SNOOP 0x00000002
|
#define ARP_OL_HOST_AUTO_REPLY 0x00000004
|
#define ARP_OL_PEER_AUTO_REPLY 0x00000008
|
|
/* ARP Offload error injection */
|
#define ARP_ERRTEST_REPLY_PEER 0x1
|
#define ARP_ERRTEST_REPLY_HOST 0x2
|
|
#define ARP_MULTIHOMING_MAX 8 /* Maximum local host IP addresses */
|
#define ND_MULTIHOMING_MAX 10 /* Maximum local host IP addresses */
|
#define ND_REQUEST_MAX 5 /* Max set of offload params */
|
/* AOAC wake event flag */
|
#define WAKE_EVENT_NLO_DISCOVERY_BIT 1
|
#define WAKE_EVENT_AP_ASSOCIATION_LOST_BIT 2
|
#define WAKE_EVENT_GTK_HANDSHAKE_ERROR_BIT 4
|
#define WAKE_EVENT_4WAY_HANDSHAKE_REQUEST_BIT 8
|
#define WAKE_EVENT_NET_PACKET_BIT 0x10
|
|
#define MAX_NUM_WOL_PATTERN 22 /* LOGO requirements min 22 */
|
|
|
/* Packet filter operation mode */
|
/* True: 1; False: 0 */
|
#define PKT_FILTER_MODE_FORWARD_ON_MATCH 1
|
/* Enable and disable pkt_filter as a whole */
|
#define PKT_FILTER_MODE_DISABLE 2
|
/* Cache first matched rx pkt(be queried by host later) */
|
#define PKT_FILTER_MODE_PKT_CACHE_ON_MATCH 4
|
/* If pkt_filter is enabled and no filter is set, don't forward anything */
|
#define PKT_FILTER_MODE_PKT_FORWARD_OFF_DEFAULT 8
|
|
#ifdef DONGLEOVERLAYS
|
#define OVERLAY_IDX_MASK 0x000000ff
|
#define OVERLAY_IDX_SHIFT 0
|
#define OVERLAY_FLAGS_MASK 0xffffff00
|
#define OVERLAY_FLAGS_SHIFT 8
|
/* overlay written to device memory immediately after loading the base image */
|
#define OVERLAY_FLAG_POSTLOAD 0x100
|
/* defer overlay download until the device responds w/WLC_E_OVL_DOWNLOAD event */
|
#define OVERLAY_FLAG_DEFER_DL 0x200
|
/* overlay downloaded prior to the host going to sleep */
|
#define OVERLAY_FLAG_PRESLEEP 0x400
|
#define OVERLAY_DOWNLOAD_CHUNKSIZE 1024
|
#endif /* DONGLEOVERLAYS */
|
|
/* reuse two number in the sc/rc space */
|
#define SMFS_CODE_MALFORMED 0xFFFE
|
#define SMFS_CODE_IGNORED 0xFFFD
|
|
/* RFAWARE def */
|
#define BCM_ACTION_RFAWARE 0x77
|
#define BCM_ACTION_RFAWARE_DCS 0x01
|
|
/* DCS reason code define */
|
#define BCM_DCS_IOVAR 0x1
|
#define BCM_DCS_UNKNOWN 0xFF
|
|
#ifdef PROP_TXSTATUS
|
/* Bit definitions for tlv iovar */
|
/*
|
* enable RSSI signals:
|
* WLFC_CTL_TYPE_RSSI
|
*/
|
#define WLFC_FLAGS_RSSI_SIGNALS 0x0001
|
|
/* enable (if/mac_open, if/mac_close,, mac_add, mac_del) signals:
|
*
|
* WLFC_CTL_TYPE_MAC_OPEN
|
* WLFC_CTL_TYPE_MAC_CLOSE
|
*
|
* WLFC_CTL_TYPE_INTERFACE_OPEN
|
* WLFC_CTL_TYPE_INTERFACE_CLOSE
|
*
|
* WLFC_CTL_TYPE_MACDESC_ADD
|
* WLFC_CTL_TYPE_MACDESC_DEL
|
*
|
*/
|
#define WLFC_FLAGS_XONXOFF_SIGNALS 0x0002
|
|
/* enable (status, fifo_credit, mac_credit) signals
|
* WLFC_CTL_TYPE_MAC_REQUEST_CREDIT
|
* WLFC_CTL_TYPE_TXSTATUS
|
* WLFC_CTL_TYPE_FIFO_CREDITBACK
|
*/
|
#define WLFC_FLAGS_CREDIT_STATUS_SIGNALS 0x0004
|
|
#define WLFC_FLAGS_HOST_PROPTXSTATUS_ACTIVE 0x0008
|
#define WLFC_FLAGS_PSQ_GENERATIONFSM_ENABLE 0x0010
|
#define WLFC_FLAGS_PSQ_ZERO_BUFFER_ENABLE 0x0020
|
#define WLFC_FLAGS_HOST_RXRERODER_ACTIVE 0x0040
|
#define WLFC_FLAGS_PKT_STAMP_SIGNALS 0x0080
|
|
#endif /* PROP_TXSTATUS */
|
|
#define WL_TIMBC_STATUS_AP_UNKNOWN 255 /* AP status for internal use only */
|
|
#define WL_DFRTS_LOGIC_OFF 0 /* Feature is disabled */
|
#define WL_DFRTS_LOGIC_OR 1 /* OR all non-zero threshold conditions */
|
#define WL_DFRTS_LOGIC_AND 2 /* AND all non-zero threshold conditions */
|
|
/* Definitions for Reliable Multicast */
|
#define WL_RELMCAST_MAX_CLIENT 32
|
#define WL_RELMCAST_FLAG_INBLACKLIST 1
|
#define WL_RELMCAST_FLAG_ACTIVEACKER 2
|
#define WL_RELMCAST_FLAG_RELMCAST 4
|
|
/* structures for proximity detection device role */
|
#define WL_PROXD_MODE_DISABLE 0
|
#define WL_PROXD_MODE_NEUTRAL 1
|
#define WL_PROXD_MODE_INITIATOR 2
|
#define WL_PROXD_MODE_TARGET 3
|
#define WL_PROXD_RANDOM_WAKEUP 0x8000
|
|
|
#ifdef NET_DETECT
|
#define NET_DETECT_MAX_WAKE_DATA_SIZE 2048
|
#define NET_DETECT_MAX_PROFILES 16
|
#define NET_DETECT_MAX_CHANNELS 50
|
#endif /* NET_DETECT */
|
|
|
/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
|
#define WL_RADIO_SW_DISABLE (1<<0)
|
#define WL_RADIO_HW_DISABLE (1<<1)
|
#define WL_RADIO_MPC_DISABLE (1<<2)
|
#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */
|
#define WL_RADIO_PERCORE_DISABLE (1<<4) /* Radio diable per core for DVT */
|
|
#define WL_SPURAVOID_OFF 0
|
#define WL_SPURAVOID_ON1 1
|
#define WL_SPURAVOID_ON2 2
|
|
|
#define WL_4335_SPURAVOID_ON1 1
|
#define WL_4335_SPURAVOID_ON2 2
|
#define WL_4335_SPURAVOID_ON3 3
|
#define WL_4335_SPURAVOID_ON4 4
|
#define WL_4335_SPURAVOID_ON5 5
|
#define WL_4335_SPURAVOID_ON6 6
|
#define WL_4335_SPURAVOID_ON7 7
|
#define WL_4335_SPURAVOID_ON8 8
|
#define WL_4335_SPURAVOID_ON9 9
|
|
/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
|
#define WL_TXPWR_OVERRIDE (1U<<31)
|
#define WL_TXPWR_2G (1U<<30)
|
#define WL_TXPWR_5G (1U<<29)
|
#define WL_TXPWR_NEG (1U<<28)
|
|
#define WL_TXPWR_MASK (~(0x7<<29))
|
#define WL_TXPWR_CORE_MAX (3)
|
#define WL_TXPWR_CORE0_MASK (0x000000FF)
|
#define WL_TXPWR_CORE0_SHIFT (0)
|
#define WL_TXPWR_CORE1_MASK (0x0000FF00)
|
#define WL_TXPWR_CORE1_SHIFT (8)
|
#define WL_TXPWR_CORE2_MASK (0x00FF0000)
|
#define WL_TXPWR_CORE2_SHIFT (16)
|
|
/* phy types (returned by WLC_GET_PHYTPE) */
|
#define WLC_PHY_TYPE_A 0
|
#define WLC_PHY_TYPE_B 1
|
#define WLC_PHY_TYPE_G 2
|
#define WLC_PHY_TYPE_N 4
|
#define WLC_PHY_TYPE_LP 5
|
#define WLC_PHY_TYPE_SSN 6
|
#define WLC_PHY_TYPE_HT 7
|
#define WLC_PHY_TYPE_LCN 8
|
#define WLC_PHY_TYPE_LCN40 10
|
#define WLC_PHY_TYPE_AC 11
|
#define WLC_PHY_TYPE_LCN20 12
|
#define WLC_PHY_TYPE_NULL 0xf
|
|
/* Values for PM */
|
#define PM_OFF 0
|
#define PM_MAX 1
|
#define PM_FAST 2
|
#define PM_FORCE_OFF 3 /* use this bit to force PM off even bt is active */
|
|
#define WL_WME_CNT_VERSION 1 /* current version of wl_wme_cnt_t */
|
|
/* fbt_cap: FBT assoc / reassoc modes. */
|
#define WLC_FBT_CAP_DRV_4WAY_AND_REASSOC 1 /* Driver 4-way handshake & reassoc (WLFBT). */
|
|
/* monitor_promisc_level bits */
|
#define WL_MONPROMISC_PROMISC 0x0001
|
#define WL_MONPROMISC_CTRL 0x0002
|
#define WL_MONPROMISC_FCS 0x0004
|
|
/* TCP Checksum Offload defines */
|
#define TOE_TX_CSUM_OL 0x00000001
|
#define TOE_RX_CSUM_OL 0x00000002
|
|
/* Wi-Fi Display Services (WFDS) */
|
#define WL_P2P_SOCIAL_CHANNELS_MAX WL_NUMCHANNELS
|
#define MAX_WFDS_SEEK_SVC 4 /* Max # of wfds services to seek */
|
#define MAX_WFDS_ADVERT_SVC 4 /* Max # of wfds services to advertise */
|
#define MAX_WFDS_SVC_NAME_LEN 200 /* maximum service_name length */
|
#define MAX_WFDS_ADV_SVC_INFO_LEN 65000 /* maximum adv service_info length */
|
#define P2P_WFDS_HASH_LEN 6 /* Length of a WFDS service hash */
|
#define MAX_WFDS_SEEK_SVC_INFO_LEN 255 /* maximum seek service_info req length */
|
#define MAX_WFDS_SEEK_SVC_NAME_LEN 200 /* maximum service_name length */
|
|
/* ap_isolate bitmaps */
|
#define AP_ISOLATE_DISABLED 0x0
|
#define AP_ISOLATE_SENDUP_ALL 0x01
|
#define AP_ISOLATE_SENDUP_MCAST 0x02
|
|
/* Type values for the wl_pwrstats_t data field */
|
#define WL_PWRSTATS_TYPE_PHY 0 /**< struct wl_pwr_phy_stats */
|
#define WL_PWRSTATS_TYPE_SCAN 1 /**< struct wl_pwr_scan_stats */
|
#define WL_PWRSTATS_TYPE_USB_HSIC 2 /**< struct wl_pwr_usb_hsic_stats */
|
#define WL_PWRSTATS_TYPE_PM_AWAKE1 3 /**< struct wl_pwr_pm_awake_stats_v1 */
|
#define WL_PWRSTATS_TYPE_CONNECTION 4 /* struct wl_pwr_connect_stats; assoc and key-exch time */
|
#define WL_PWRSTATS_TYPE_PCIE 6 /**< struct wl_pwr_pcie_stats */
|
#define WL_PWRSTATS_TYPE_PM_AWAKE2 7 /**< struct wl_pwr_pm_awake_stats_v2 */
|
#define WL_PWRSTATS_TYPE_SDIO 8 /* struct wl_pwr_sdio_stats */
|
#define WL_PWRSTATS_TYPE_MIMO_PS_METRICS 9 /* struct wl_mimo_meas_metrics_t */
|
|
#endif /* wlioctl_defs_h */
|
