// SPDX-License-Identifier: GPL-2.0-or-later
|
/*
|
* Copyright 2013 Emilio López
|
* Emilio López <emilio@elopez.com.ar>
|
*
|
* Copyright 2013 Chen-Yu Tsai
|
* Chen-Yu Tsai <wens@csie.org>
|
*/
|
|
#include <linux/clk-provider.h>
|
#include <linux/io.h>
|
#include <linux/of.h>
|
#include <linux/of_address.h>
|
#include <linux/slab.h>
|
|
static DEFINE_SPINLOCK(gmac_lock);
|
|
/**
|
* sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module
|
*
|
* This clock looks something like this
|
* ________________________
|
* MII TX clock from PHY >-----|___________ _________|----> to GMAC core
|
* GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY
|
* Ext. 125MHz RGMII TX clk >--|__divider__/ |
|
* |________________________|
|
*
|
* The external 125 MHz reference is optional, i.e. GMAC can use its
|
* internal TX clock just fine. The A31 GMAC clock module does not have
|
* the divider controls for the external reference.
|
*
|
* To keep it simple, let the GMAC use either the MII TX clock for MII mode,
|
* and its internal TX clock for GMII and RGMII modes. The GMAC driver should
|
* select the appropriate source and gate/ungate the output to the PHY.
|
*
|
* Only the GMAC should use this clock. Altering the clock so that it doesn't
|
* match the GMAC's operation parameters will result in the GMAC not being
|
* able to send traffic out. The GMAC driver should set the clock rate and
|
* enable/disable this clock to configure the required state. The clock
|
* driver then responds by auto-reparenting the clock.
|
*/
|
|
#define SUN7I_A20_GMAC_GPIT 2
|
#define SUN7I_A20_GMAC_MASK 0x3
|
#define SUN7I_A20_GMAC_PARENTS 2
|
|
static u32 sun7i_a20_gmac_mux_table[SUN7I_A20_GMAC_PARENTS] = {
|
0x00, /* Select mii_phy_tx_clk */
|
0x02, /* Select gmac_int_tx_clk */
|
};
|
|
static void __init sun7i_a20_gmac_clk_setup(struct device_node *node)
|
{
|
struct clk *clk;
|
struct clk_mux *mux;
|
struct clk_gate *gate;
|
const char *clk_name = node->name;
|
const char *parents[SUN7I_A20_GMAC_PARENTS];
|
void __iomem *reg;
|
|
if (of_property_read_string(node, "clock-output-names", &clk_name))
|
return;
|
|
/* allocate mux and gate clock structs */
|
mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
|
if (!mux)
|
return;
|
|
gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
|
if (!gate)
|
goto free_mux;
|
|
/* gmac clock requires exactly 2 parents */
|
if (of_clk_parent_fill(node, parents, 2) != 2)
|
goto free_gate;
|
|
reg = of_iomap(node, 0);
|
if (!reg)
|
goto free_gate;
|
|
/* set up gate and fixed rate properties */
|
gate->reg = reg;
|
gate->bit_idx = SUN7I_A20_GMAC_GPIT;
|
gate->lock = &gmac_lock;
|
mux->reg = reg;
|
mux->mask = SUN7I_A20_GMAC_MASK;
|
mux->table = sun7i_a20_gmac_mux_table;
|
mux->lock = &gmac_lock;
|
|
clk = clk_register_composite(NULL, clk_name,
|
parents, SUN7I_A20_GMAC_PARENTS,
|
&mux->hw, &clk_mux_ops,
|
NULL, NULL,
|
&gate->hw, &clk_gate_ops,
|
0);
|
|
if (IS_ERR(clk))
|
goto iounmap_reg;
|
|
of_clk_add_provider(node, of_clk_src_simple_get, clk);
|
|
return;
|
|
iounmap_reg:
|
iounmap(reg);
|
free_gate:
|
kfree(gate);
|
free_mux:
|
kfree(mux);
|
}
|
CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
|
sun7i_a20_gmac_clk_setup);
|
