/*
|
* T4240QDS Device Tree Source
|
*
|
* Copyright 2012 - 2015 Freescale Semiconductor Inc.
|
*
|
* Redistribution and use in source and binary forms, with or without
|
* modification, are permitted provided that the following conditions are met:
|
* * Redistributions of source code must retain the above copyright
|
* notice, this list of conditions and the following disclaimer.
|
* * Redistributions in binary form must reproduce the above copyright
|
* notice, this list of conditions and the following disclaimer in the
|
* documentation and/or other materials provided with the distribution.
|
* * Neither the name of Freescale Semiconductor nor the
|
* names of its contributors may be used to endorse or promote products
|
* derived from this software without specific prior written permission.
|
*
|
*
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
* GNU General Public License ("GPL") as published by the Free Software
|
* Foundation, either version 2 of that License or (at your option) any
|
* later version.
|
*
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
*/
|
|
/include/ "t4240si-pre.dtsi"
|
|
/ {
|
model = "fsl,T4240QDS";
|
compatible = "fsl,T4240QDS";
|
#address-cells = <2>;
|
#size-cells = <2>;
|
interrupt-parent = <&mpic>;
|
|
aliases{
|
phy_rgmii1 = &phyrgmii1;
|
phy_rgmii2 = &phyrgmii2;
|
phy_sgmii3 = &phy3;
|
phy_sgmii4 = &phy4;
|
phy_sgmii11 = &phy11;
|
phy_sgmii12 = &phy12;
|
sgmii_phy11 = &sgmiiphy11;
|
sgmii_phy12 = &sgmiiphy12;
|
sgmii_phy13 = &sgmiiphy13;
|
sgmii_phy14 = &sgmiiphy14;
|
sgmii_phy21 = &sgmiiphy21;
|
sgmii_phy22 = &sgmiiphy22;
|
sgmii_phy23 = &sgmiiphy23;
|
sgmii_phy24 = &sgmiiphy24;
|
sgmii_phy31 = &sgmiiphy31;
|
sgmii_phy32 = &sgmiiphy32;
|
sgmii_phy33 = &sgmiiphy33;
|
sgmii_phy34 = &sgmiiphy34;
|
sgmii_phy41 = &sgmiiphy41;
|
sgmii_phy42 = &sgmiiphy42;
|
sgmii_phy43 = &sgmiiphy43;
|
sgmii_phy44 = &sgmiiphy44;
|
phy_xfi1 = &xfiphy1;
|
phy_xfi2 = &xfiphy2;
|
phy_xfi3 = &xfiphy3;
|
phy_xfi4 = &xfiphy4;
|
xfi_pcs_mdio1 = &xfimdio0;
|
xfi_pcs_mdio2 = &xfimdio1;
|
xfi_pcs_mdio3 = &xfimdio2;
|
xfi_pcs_mdio4 = &xfimdio3;
|
emi1_rgmii = &t4240mdio0;
|
emi1_slot1 = &t4240mdio1;
|
emi1_slot2 = &t4240mdio2;
|
emi1_slot3 = &t4240mdio3;
|
emi1_slot4 = &t4240mdio4;
|
};
|
|
ifc: localbus@ffe124000 {
|
reg = <0xf 0xfe124000 0 0x2000>;
|
ranges = <0 0 0xf 0xe8000000 0x08000000
|
2 0 0xf 0xff800000 0x00010000
|
3 0 0xf 0xffdf0000 0x00008000>;
|
|
nor@0,0 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "cfi-flash";
|
reg = <0x0 0x0 0x8000000>;
|
|
bank-width = <2>;
|
device-width = <1>;
|
};
|
|
nand@2,0 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "fsl,ifc-nand";
|
reg = <0x2 0x0 0x10000>;
|
|
partition@0 {
|
/* This location must not be altered */
|
/* 1MB for u-boot Bootloader Image */
|
reg = <0x0 0x00100000>;
|
label = "NAND U-Boot Image";
|
read-only;
|
};
|
|
partition@100000 {
|
/* 1MB for DTB Image */
|
reg = <0x00100000 0x00100000>;
|
label = "NAND DTB Image";
|
};
|
|
partition@200000 {
|
/* 10MB for Linux Kernel Image */
|
reg = <0x00200000 0x00A00000>;
|
label = "NAND Linux Kernel Image";
|
};
|
|
partition@C00000 {
|
/* 500MB for Root file System Image */
|
reg = <0x00c00000 0x1F400000>;
|
label = "NAND RFS Image";
|
};
|
};
|
|
board-control@3,0 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
|
reg = <3 0 0x300>;
|
ranges = <0 3 0 0x300>;
|
|
mdio-mux-emi1 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
compatible = "mdio-mux-mmioreg", "mdio-mux";
|
mdio-parent-bus = <&mdio1>;
|
reg = <0x54 1>;
|
mux-mask = <0xe0>;
|
|
t4240mdio0: mdio@0 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <0>;
|
|
phyrgmii1: ethernet-phy@1 {
|
reg = <0x1>;
|
};
|
|
phyrgmii2: ethernet-phy@2 {
|
reg = <0x2>;
|
};
|
};
|
|
t4240mdio1: mdio@20 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <0x20>;
|
status = "disabled";
|
|
phy1: ethernet-phy@0 {
|
reg = <0x0>;
|
};
|
|
phy2: ethernet-phy@1 {
|
reg = <0x1>;
|
};
|
|
phy3: ethernet-phy@2 {
|
reg = <0x2>;
|
};
|
|
phy4: ethernet-phy@3 {
|
reg = <0x3>;
|
};
|
|
sgmiiphy11: ethernet-phy@1c {
|
reg = <0x1c>;
|
};
|
|
sgmiiphy12: ethernet-phy@1d {
|
reg = <0x1d>;
|
};
|
|
sgmiiphy13: ethernet-phy@1e {
|
reg = <0x1e>;
|
};
|
|
sgmiiphy14: ethernet-phy@1f {
|
reg = <0x1f>;
|
};
|
};
|
|
t4240mdio2: mdio@40 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <0x40>;
|
status = "disabled";
|
|
phy5: ethernet-phy@4 {
|
reg = <0x4>;
|
};
|
|
phy6: ethernet-phy@5 {
|
reg = <0x5>;
|
};
|
|
phy7: ethernet-phy@6 {
|
reg = <0x6>;
|
};
|
|
phy8: ethernet-phy@7 {
|
reg = <0x7>;
|
};
|
|
sgmiiphy21: ethernet-phy@1c {
|
reg = <0x1c>;
|
};
|
|
sgmiiphy22: ethernet-phy@1d {
|
reg = <0x1d>;
|
};
|
|
sgmiiphy23: ethernet-phy@1e {
|
reg = <0x1e>;
|
};
|
|
sgmiiphy24: ethernet-phy@1f {
|
reg = <0x1f>;
|
};
|
};
|
|
t4240mdio3: mdio@60 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <0x60>;
|
status = "disabled";
|
|
phy9: ethernet-phy@8 {
|
reg = <0x8>;
|
};
|
|
phy10: ethernet-phy@9 {
|
reg = <0x9>;
|
};
|
|
phy11: ethernet-phy@a {
|
reg = <0xa>;
|
};
|
|
phy12: ethernet-phy@b {
|
reg = <0xb>;
|
};
|
|
sgmiiphy31: ethernet-phy@1c {
|
reg = <0x1c>;
|
};
|
|
sgmiiphy32: ethernet-phy@1d {
|
reg = <0x1d>;
|
};
|
|
sgmiiphy33: ethernet-phy@1e {
|
reg = <0x1e>;
|
};
|
|
sgmiiphy34: ethernet-phy@1f {
|
reg = <0x1f>;
|
};
|
};
|
|
t4240mdio4: mdio@80 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <0x80>;
|
status = "disabled";
|
|
phy13: ethernet-phy@c {
|
reg = <0xc>;
|
};
|
|
phy14: ethernet-phy@d {
|
reg = <0xd>;
|
};
|
|
phy15: ethernet-phy@e {
|
reg = <0xe>;
|
};
|
|
phy16: ethernet-phy@f {
|
reg = <0xf>;
|
};
|
|
sgmiiphy41: ethernet-phy@1c {
|
reg = <0x1c>;
|
};
|
|
sgmiiphy42: ethernet-phy@1d {
|
reg = <0x1d>;
|
};
|
|
sgmiiphy43: ethernet-phy@1e {
|
reg = <0x1e>;
|
};
|
|
sgmiiphy44: ethernet-phy@1f {
|
reg = <0x1f>;
|
};
|
};
|
};
|
};
|
};
|
|
memory {
|
device_type = "memory";
|
};
|
|
reserved-memory {
|
#address-cells = <2>;
|
#size-cells = <2>;
|
ranges;
|
|
bman_fbpr: bman-fbpr {
|
size = <0 0x1000000>;
|
alignment = <0 0x1000000>;
|
};
|
qman_fqd: qman-fqd {
|
size = <0 0x400000>;
|
alignment = <0 0x400000>;
|
};
|
qman_pfdr: qman-pfdr {
|
size = <0 0x2000000>;
|
alignment = <0 0x2000000>;
|
};
|
};
|
|
dcsr: dcsr@f00000000 {
|
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
|
};
|
|
bportals: bman-portals@ff4000000 {
|
ranges = <0x0 0xf 0xf4000000 0x2000000>;
|
};
|
|
qportals: qman-portals@ff6000000 {
|
ranges = <0x0 0xf 0xf6000000 0x2000000>;
|
};
|
|
soc: soc@ffe000000 {
|
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
|
reg = <0xf 0xfe000000 0 0x00001000>;
|
spi@110000 {
|
flash@0 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "sst,sst25wf040", "jedec,spi-nor";
|
reg = <0>;
|
spi-max-frequency = <40000000>; /* input clock */
|
};
|
};
|
|
i2c@118000 {
|
mux@77 {
|
compatible = "nxp,pca9547";
|
reg = <0x77>;
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
i2c@0 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <0>;
|
|
eeprom@51 {
|
compatible = "atmel,24c256";
|
reg = <0x51>;
|
};
|
eeprom@52 {
|
compatible = "atmel,24c256";
|
reg = <0x52>;
|
};
|
eeprom@53 {
|
compatible = "atmel,24c256";
|
reg = <0x53>;
|
};
|
eeprom@54 {
|
compatible = "atmel,24c256";
|
reg = <0x54>;
|
};
|
eeprom@55 {
|
compatible = "atmel,24c256";
|
reg = <0x55>;
|
};
|
eeprom@56 {
|
compatible = "atmel,24c256";
|
reg = <0x56>;
|
};
|
rtc@68 {
|
compatible = "dallas,ds3232";
|
reg = <0x68>;
|
interrupts = <0x1 0x1 0 0>;
|
};
|
};
|
|
i2c@2 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <0x2>;
|
|
ina220@40 {
|
compatible = "ti,ina220";
|
reg = <0x40>;
|
shunt-resistor = <1000>;
|
};
|
|
ina220@41 {
|
compatible = "ti,ina220";
|
reg = <0x41>;
|
shunt-resistor = <1000>;
|
};
|
|
ina220@44 {
|
compatible = "ti,ina220";
|
reg = <0x44>;
|
shunt-resistor = <1000>;
|
};
|
|
ina220@45 {
|
compatible = "ti,ina220";
|
reg = <0x45>;
|
shunt-resistor = <1000>;
|
};
|
|
ina220@46 {
|
compatible = "ti,ina220";
|
reg = <0x46>;
|
shunt-resistor = <1000>;
|
};
|
|
ina220@47 {
|
compatible = "ti,ina220";
|
reg = <0x47>;
|
shunt-resistor = <1000>;
|
};
|
};
|
};
|
};
|
|
sdhc@114000 {
|
voltage-ranges = <1800 1800 3300 3300>;
|
};
|
|
fman@400000 {
|
port@83000 {
|
status = "disabled";
|
};
|
|
port@84000 {
|
status = "disabled";
|
};
|
|
port@85000 {
|
status = "disabled";
|
};
|
|
port@86000 {
|
status = "disabled";
|
};
|
|
port@87000 {
|
status = "disabled";
|
};
|
|
ethernet@e0000 {
|
phy-handle = <&phy5>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e2000 {
|
phy-handle = <&phy6>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e4000 {
|
phy-handle = <&phy7>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e6000 {
|
phy-handle = <&phy8>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e8000 {
|
phy-handle = <&phyrgmii2>;
|
phy-connection-type = "rgmii";
|
};
|
|
ethernet@ea000 {
|
phy-handle = <&phy2>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@f0000 {
|
phy-handle = <&xauiphy1>;
|
phy-connection-type = "xgmii";
|
};
|
|
ethernet@f2000 {
|
phy-handle = <&xauiphy2>;
|
phy-connection-type = "xgmii";
|
};
|
|
xfimdio0: mdio@f1000 {
|
status = "disabled";
|
|
xfiphy1: ethernet-phy@0 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x0>;
|
};
|
};
|
|
xfimdio1: mdio@f3000 {
|
status = "disabled";
|
|
xfiphy2: ethernet-phy@0 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x0>;
|
};
|
};
|
};
|
|
fman@500000 {
|
port@84000 {
|
status = "disabled";
|
};
|
|
port@85000 {
|
status = "disabled";
|
};
|
|
port@86000 {
|
status = "disabled";
|
};
|
|
port@87000 {
|
status = "disabled";
|
};
|
|
ethernet@e0000 {
|
phy-handle = <&phy13>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e2000 {
|
phy-handle = <&phy14>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e4000 {
|
phy-handle = <&phy15>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e6000 {
|
phy-handle = <&phy16>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e8000 {
|
phy-handle = <&phyrgmii1>;
|
phy-connection-type = "rgmii";
|
};
|
|
ethernet@ea000 {
|
phy-handle = <&phy10>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@f0000 {
|
phy-handle = <&xauiphy3>;
|
phy-connection-type = "xgmii";
|
};
|
|
ethernet@f2000 {
|
phy-handle = <&xauiphy4>;
|
phy-connection-type = "xgmii";
|
};
|
|
xfimdio2: mdio@f1000 {
|
status = "disabled";
|
|
xfiphy3: ethernet-phy@0 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x0>;
|
};
|
};
|
|
xfimdio3: mdio@f3000 {
|
status = "disabled";
|
|
xfiphy4: ethernet-phy@0 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x0>;
|
};
|
};
|
|
mdio@fd000 {
|
xauiphy1: ethernet-phy@0 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x0>;
|
};
|
|
xauiphy2: ethernet-phy@1 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x1>;
|
};
|
|
xauiphy3: ethernet-phy@2 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x2>;
|
};
|
|
xauiphy4: ethernet-phy@3 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x3>;
|
};
|
};
|
};
|
};
|
|
pci0: pcie@ffe240000 {
|
reg = <0xf 0xfe240000 0 0x10000>;
|
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
|
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
|
pcie@0 {
|
ranges = <0x02000000 0 0xe0000000
|
0x02000000 0 0xe0000000
|
0 0x20000000
|
|
0x01000000 0 0x00000000
|
0x01000000 0 0x00000000
|
0 0x00010000>;
|
};
|
};
|
|
pci1: pcie@ffe250000 {
|
reg = <0xf 0xfe250000 0 0x10000>;
|
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
|
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
|
pcie@0 {
|
ranges = <0x02000000 0 0xe0000000
|
0x02000000 0 0xe0000000
|
0 0x20000000
|
|
0x01000000 0 0x00000000
|
0x01000000 0 0x00000000
|
0 0x00010000>;
|
};
|
};
|
|
pci2: pcie@ffe260000 {
|
reg = <0xf 0xfe260000 0 0x1000>;
|
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
|
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
|
pcie@0 {
|
ranges = <0x02000000 0 0xe0000000
|
0x02000000 0 0xe0000000
|
0 0x20000000
|
|
0x01000000 0 0x00000000
|
0x01000000 0 0x00000000
|
0 0x00010000>;
|
};
|
};
|
|
pci3: pcie@ffe270000 {
|
reg = <0xf 0xfe270000 0 0x10000>;
|
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
|
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
|
pcie@0 {
|
ranges = <0x02000000 0 0xe0000000
|
0x02000000 0 0xe0000000
|
0 0x20000000
|
|
0x01000000 0 0x00000000
|
0x01000000 0 0x00000000
|
0 0x00010000>;
|
};
|
};
|
rio: rapidio@ffe0c0000 {
|
reg = <0xf 0xfe0c0000 0 0x11000>;
|
|
port1 {
|
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
|
};
|
port2 {
|
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
|
};
|
};
|
};
|
|
/include/ "t4240si-post.dtsi"
|
