/*
|
* P4080DS Device Tree Source
|
*
|
* Copyright 2009 - 2015 Freescale Semiconductor Inc.
|
*
|
* Redistribution and use in source and binary forms, with or without
|
* modification, are permitted provided that the following conditions are met:
|
* * Redistributions of source code must retain the above copyright
|
* notice, this list of conditions and the following disclaimer.
|
* * Redistributions in binary form must reproduce the above copyright
|
* notice, this list of conditions and the following disclaimer in the
|
* documentation and/or other materials provided with the distribution.
|
* * Neither the name of Freescale Semiconductor nor the
|
* names of its contributors may be used to endorse or promote products
|
* derived from this software without specific prior written permission.
|
*
|
*
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
* GNU General Public License ("GPL") as published by the Free Software
|
* Foundation, either version 2 of that License or (at your option) any
|
* later version.
|
*
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
*/
|
|
/include/ "p4080si-pre.dtsi"
|
|
/ {
|
model = "fsl,P4080DS";
|
compatible = "fsl,P4080DS";
|
#address-cells = <2>;
|
#size-cells = <2>;
|
interrupt-parent = <&mpic>;
|
|
aliases {
|
phy_rgmii = &phyrgmii;
|
phy5_slot3 = &phy5slot3;
|
phy6_slot3 = &phy6slot3;
|
phy7_slot3 = &phy7slot3;
|
phy8_slot3 = &phy8slot3;
|
emi1_slot3 = &p4080mdio2;
|
emi1_slot4 = &p4080mdio1;
|
emi1_slot5 = &p4080mdio3;
|
emi1_rgmii = &p4080mdio0;
|
emi2_slot4 = &p4080xmdio1;
|
emi2_slot5 = &p4080xmdio3;
|
};
|
|
memory {
|
device_type = "memory";
|
};
|
|
reserved-memory {
|
#address-cells = <2>;
|
#size-cells = <2>;
|
ranges;
|
|
bman_fbpr: bman-fbpr {
|
size = <0 0x1000000>;
|
alignment = <0 0x1000000>;
|
};
|
qman_fqd: qman-fqd {
|
size = <0 0x400000>;
|
alignment = <0 0x400000>;
|
};
|
qman_pfdr: qman-pfdr {
|
size = <0 0x2000000>;
|
alignment = <0 0x2000000>;
|
};
|
};
|
|
dcsr: dcsr@f00000000 {
|
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
|
};
|
|
bportals: bman-portals@ff4000000 {
|
ranges = <0x0 0xf 0xf4000000 0x200000>;
|
};
|
|
qportals: qman-portals@ff4200000 {
|
ranges = <0x0 0xf 0xf4200000 0x200000>;
|
};
|
|
soc: soc@ffe000000 {
|
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
|
reg = <0xf 0xfe000000 0 0x00001000>;
|
|
spi@110000 {
|
flash@0 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "spansion,s25sl12801", "jedec,spi-nor";
|
reg = <0>;
|
spi-max-frequency = <40000000>; /* input clock */
|
partition@u-boot {
|
label = "u-boot";
|
reg = <0x00000000 0x00100000>;
|
read-only;
|
};
|
partition@kernel {
|
label = "kernel";
|
reg = <0x00100000 0x00500000>;
|
read-only;
|
};
|
partition@dtb {
|
label = "dtb";
|
reg = <0x00600000 0x00100000>;
|
read-only;
|
};
|
partition@fs {
|
label = "file system";
|
reg = <0x00700000 0x00900000>;
|
};
|
};
|
};
|
|
i2c@118100 {
|
eeprom@51 {
|
compatible = "atmel,spd";
|
reg = <0x51>;
|
};
|
eeprom@52 {
|
compatible = "atmel,spd";
|
reg = <0x52>;
|
};
|
rtc@68 {
|
compatible = "dallas,ds3232";
|
reg = <0x68>;
|
interrupts = <0x1 0x1 0 0>;
|
};
|
adt7461@4c {
|
compatible = "adi,adt7461";
|
reg = <0x4c>;
|
};
|
};
|
|
i2c@118000 {
|
zl2006@21 {
|
compatible = "zl2006";
|
reg = <0x21>;
|
};
|
zl2006@22 {
|
compatible = "zl2006";
|
reg = <0x22>;
|
};
|
zl2006@23 {
|
compatible = "zl2006";
|
reg = <0x23>;
|
};
|
zl2006@24 {
|
compatible = "zl2006";
|
reg = <0x24>;
|
};
|
eeprom@50 {
|
compatible = "atmel,24c64";
|
reg = <0x50>;
|
};
|
eeprom@55 {
|
compatible = "atmel,24c64";
|
reg = <0x55>;
|
};
|
eeprom@56 {
|
compatible = "atmel,24c64";
|
reg = <0x56>;
|
};
|
eeprom@57 {
|
compatible = "atmel,24c02";
|
reg = <0x57>;
|
};
|
};
|
|
i2c@119100 {
|
/* 0x6E: ICS9FG108 */
|
};
|
|
usb0: usb@210000 {
|
phy_type = "ulpi";
|
};
|
|
usb1: usb@211000 {
|
dr_mode = "host";
|
phy_type = "ulpi";
|
};
|
|
fman@400000 {
|
ethernet@e0000 {
|
phy-handle = <&phy0>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e2000 {
|
phy-handle = <&phy1>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e4000 {
|
phy-handle = <&phy2>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e6000 {
|
phy-handle = <&phy3>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@f0000 {
|
phy-handle = <&phy10>;
|
phy-connection-type = "xgmii";
|
};
|
};
|
|
fman@500000 {
|
ethernet@e0000 {
|
phy-handle = <&phy5>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e2000 {
|
phy-handle = <&phy6>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e4000 {
|
phy-handle = <&phy7>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@e6000 {
|
phy-handle = <&phy8>;
|
phy-connection-type = "sgmii";
|
};
|
|
ethernet@f0000 {
|
phy-handle = <&phy11>;
|
phy-connection-type = "xgmii";
|
};
|
};
|
};
|
|
rio: rapidio@ffe0c0000 {
|
reg = <0xf 0xfe0c0000 0 0x11000>;
|
|
port1 {
|
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
|
};
|
port2 {
|
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
|
};
|
};
|
|
lbc: localbus@ffe124000 {
|
reg = <0xf 0xfe124000 0 0x1000>;
|
ranges = <0 0 0xf 0xe8000000 0x08000000
|
3 0 0xf 0xffdf0000 0x00008000>;
|
|
flash@0,0 {
|
compatible = "cfi-flash";
|
reg = <0 0 0x08000000>;
|
bank-width = <2>;
|
device-width = <2>;
|
};
|
|
board-control@3,0 {
|
compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
|
reg = <3 0 0x30>;
|
};
|
};
|
|
pci0: pcie@ffe200000 {
|
reg = <0xf 0xfe200000 0 0x1000>;
|
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
|
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
|
pcie@0 {
|
ranges = <0x02000000 0 0xe0000000
|
0x02000000 0 0xe0000000
|
0 0x20000000
|
|
0x01000000 0 0x00000000
|
0x01000000 0 0x00000000
|
0 0x00010000>;
|
};
|
};
|
|
pci1: pcie@ffe201000 {
|
reg = <0xf 0xfe201000 0 0x1000>;
|
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
|
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
|
pcie@0 {
|
ranges = <0x02000000 0 0xe0000000
|
0x02000000 0 0xe0000000
|
0 0x20000000
|
|
0x01000000 0 0x00000000
|
0x01000000 0 0x00000000
|
0 0x00010000>;
|
};
|
};
|
|
pci2: pcie@ffe202000 {
|
reg = <0xf 0xfe202000 0 0x1000>;
|
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
|
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
|
pcie@0 {
|
ranges = <0x02000000 0 0xe0000000
|
0x02000000 0 0xe0000000
|
0 0x20000000
|
|
0x01000000 0 0x00000000
|
0x01000000 0 0x00000000
|
0 0x00010000>;
|
};
|
};
|
|
mdio-mux-emi1 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
compatible = "mdio-mux-gpio", "mdio-mux";
|
mdio-parent-bus = <&mdio0>;
|
gpios = <&gpio0 1 0>, <&gpio0 0 0>;
|
|
p4080mdio0: mdio@0 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <0>;
|
|
phyrgmii: ethernet-phy@0 {
|
reg = <0x0>;
|
};
|
};
|
|
p4080mdio1: mdio@1 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <1>;
|
|
phy5: ethernet-phy@1c {
|
reg = <0x1c>;
|
};
|
|
phy6: ethernet-phy@1d {
|
reg = <0x1d>;
|
};
|
|
phy7: ethernet-phy@1e {
|
reg = <0x1e>;
|
};
|
|
phy8: ethernet-phy@1f {
|
reg = <0x1f>;
|
};
|
};
|
|
p4080mdio2: mdio@2 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <2>;
|
status = "disabled";
|
|
phy5slot3: ethernet-phy@1c {
|
reg = <0x1c>;
|
};
|
|
phy6slot3: ethernet-phy@1d {
|
reg = <0x1d>;
|
};
|
|
phy7slot3: ethernet-phy@1e {
|
reg = <0x1e>;
|
};
|
|
phy8slot3: ethernet-phy@1f {
|
reg = <0x1f>;
|
};
|
};
|
|
p4080mdio3: mdio@3 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <3>;
|
|
phy0: ethernet-phy@1c {
|
reg = <0x1c>;
|
};
|
|
phy1: ethernet-phy@1d {
|
reg = <0x1d>;
|
};
|
|
phy2: ethernet-phy@1e {
|
reg = <0x1e>;
|
};
|
|
phy3: ethernet-phy@1f {
|
reg = <0x1f>;
|
};
|
};
|
};
|
|
mdio-mux-emi2 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
compatible = "mdio-mux-gpio", "mdio-mux";
|
mdio-parent-bus = <&xmdio0>;
|
gpios = <&gpio0 3 0>, <&gpio0 2 0>;
|
|
p4080xmdio1: mdio@1 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <1>;
|
|
phy11: ethernet-phy@0 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x0>;
|
};
|
};
|
|
p4080xmdio3: mdio@3 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reg = <3>;
|
|
phy10: ethernet-phy@4 {
|
compatible = "ethernet-phy-ieee802.3-c45";
|
reg = <0x4>;
|
};
|
};
|
};
|
};
|
|
/include/ "p4080si-post.dtsi"
|
