/*
|
* P1022/P1013 Silicon/SoC Device Tree Source (post include)
|
*
|
* Copyright 2011 Freescale Semiconductor Inc.
|
*
|
* Redistribution and use in source and binary forms, with or without
|
* modification, are permitted provided that the following conditions are met:
|
* * Redistributions of source code must retain the above copyright
|
* notice, this list of conditions and the following disclaimer.
|
* * Redistributions in binary form must reproduce the above copyright
|
* notice, this list of conditions and the following disclaimer in the
|
* documentation and/or other materials provided with the distribution.
|
* * Neither the name of Freescale Semiconductor nor the
|
* names of its contributors may be used to endorse or promote products
|
* derived from this software without specific prior written permission.
|
*
|
*
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
* GNU General Public License ("GPL") as published by the Free Software
|
* Foundation, either version 2 of that License or (at your option) any
|
* later version.
|
*
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
*/
|
|
&lbc {
|
#address-cells = <2>;
|
#size-cells = <1>;
|
/*
|
* The localbus on the P1022 is not a simple-bus because of the eLBC
|
* pin muxing when the DIU is enabled.
|
*/
|
compatible = "fsl,p1022-elbc", "fsl,elbc";
|
interrupts = <19 2 0 0>,
|
<16 2 0 0>;
|
};
|
|
/* controller at 0x9000 */
|
&pci0 {
|
compatible = "fsl,mpc8548-pcie";
|
device_type = "pci";
|
#size-cells = <2>;
|
#address-cells = <3>;
|
bus-range = <0 255>;
|
clock-frequency = <33333333>;
|
interrupts = <16 2 0 0>;
|
|
pcie@0 {
|
reg = <0 0 0 0 0>;
|
#interrupt-cells = <1>;
|
#size-cells = <2>;
|
#address-cells = <3>;
|
device_type = "pci";
|
interrupts = <16 2 0 0>;
|
interrupt-map-mask = <0xf800 0 0 7>;
|
interrupt-map = <
|
/* IDSEL 0x0 */
|
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
>;
|
};
|
};
|
|
/* controller at 0xa000 */
|
&pci1 {
|
compatible = "fsl,mpc8548-pcie";
|
device_type = "pci";
|
#size-cells = <2>;
|
#address-cells = <3>;
|
bus-range = <0 255>;
|
clock-frequency = <33333333>;
|
interrupts = <16 2 0 0>;
|
|
pcie@0 {
|
reg = <0 0 0 0 0>;
|
#interrupt-cells = <1>;
|
#size-cells = <2>;
|
#address-cells = <3>;
|
device_type = "pci";
|
interrupts = <16 2 0 0>;
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
/* IDSEL 0x0 */
|
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
>;
|
};
|
};
|
|
/* controller at 0xb000 */
|
&pci2 {
|
compatible = "fsl,mpc8548-pcie";
|
device_type = "pci";
|
#size-cells = <2>;
|
#address-cells = <3>;
|
bus-range = <0 255>;
|
clock-frequency = <33333333>;
|
interrupts = <16 2 0 0>;
|
|
pcie@0 {
|
reg = <0 0 0 0 0>;
|
#interrupt-cells = <1>;
|
#size-cells = <2>;
|
#address-cells = <3>;
|
device_type = "pci";
|
interrupts = <16 2 0 0>;
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
/* IDSEL 0x0 */
|
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
|
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
|
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
|
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
|
>;
|
};
|
};
|
|
&soc {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
device_type = "soc";
|
compatible = "fsl,p1022-immr", "simple-bus";
|
bus-frequency = <0>; // Filled out by uboot.
|
|
ecm-law@0 {
|
compatible = "fsl,ecm-law";
|
reg = <0x0 0x1000>;
|
fsl,num-laws = <12>;
|
};
|
|
ecm@1000 {
|
compatible = "fsl,p1022-ecm", "fsl,ecm";
|
reg = <0x1000 0x1000>;
|
interrupts = <16 2 0 0>;
|
};
|
|
memory-controller@2000 {
|
compatible = "fsl,p1022-memory-controller";
|
reg = <0x2000 0x1000>;
|
interrupts = <16 2 0 0>;
|
};
|
|
/include/ "pq3-i2c-0.dtsi"
|
/include/ "pq3-i2c-1.dtsi"
|
/include/ "pq3-duart-0.dtsi"
|
/include/ "pq3-espi-0.dtsi"
|
spi@7000 {
|
fsl,espi-num-chipselects = <4>;
|
};
|
|
/include/ "pq3-dma-1.dtsi"
|
dma@c300 {
|
dma00: dma-channel@0 {
|
compatible = "fsl,ssi-dma-channel";
|
};
|
dma01: dma-channel@80 {
|
compatible = "fsl,ssi-dma-channel";
|
};
|
};
|
|
/include/ "pq3-gpio-0.dtsi"
|
|
display: display@10000 {
|
compatible = "fsl,diu", "fsl,p1022-diu";
|
reg = <0x10000 1000>;
|
interrupts = <64 2 0 0>;
|
};
|
|
ssi@15000 {
|
compatible = "fsl,mpc8610-ssi";
|
cell-index = <0>;
|
reg = <0x15000 0x100>;
|
interrupts = <75 2 0 0>;
|
fsl,playback-dma = <&dma00>;
|
fsl,capture-dma = <&dma01>;
|
fsl,fifo-depth = <15>;
|
};
|
|
/include/ "pq3-sata2-0.dtsi"
|
/include/ "pq3-sata2-1.dtsi"
|
|
L2: l2-cache-controller@20000 {
|
compatible = "fsl,p1022-l2-cache-controller";
|
reg = <0x20000 0x1000>;
|
cache-line-size = <32>; // 32 bytes
|
cache-size = <0x40000>; // L2,256K
|
interrupts = <16 2 0 0>;
|
};
|
|
/include/ "pq3-dma-0.dtsi"
|
/include/ "pq3-usb2-dr-0.dtsi"
|
usb@22000 {
|
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
|
};
|
/include/ "pq3-usb2-dr-1.dtsi"
|
usb@23000 {
|
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
|
};
|
|
/include/ "pq3-esdhc-0.dtsi"
|
sdhc@2e000 {
|
compatible = "fsl,p1022-esdhc", "fsl,esdhc";
|
sdhci,auto-cmd12;
|
};
|
|
/include/ "pq3-sec3.3-0.dtsi"
|
/include/ "pq3-mpic.dtsi"
|
/include/ "pq3-mpic-timer-B.dtsi"
|
|
/include/ "pq3-etsec2-0.dtsi"
|
enet0: enet0_grp2: ethernet@b0000 {
|
fsl,wake-on-filer;
|
};
|
|
/include/ "pq3-etsec2-1.dtsi"
|
enet1: enet1_grp2: ethernet@b1000 {
|
fsl,wake-on-filer;
|
};
|
|
global-utilities@e0000 {
|
compatible = "fsl,p1022-guts";
|
reg = <0xe0000 0x1000>;
|
fsl,has-rstcr;
|
};
|
|
power@e0070{
|
compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
|
reg = <0xe0070 0x20>;
|
};
|
|
};
|
|
/include/ "pq3-etsec2-grp2-0.dtsi"
|
/include/ "pq3-etsec2-grp2-1.dtsi"
|
