/* 
 | 
 * MPC8572DS Device Tree Source stub (no addresses or top-level ranges) 
 | 
 * 
 | 
 * Copyright 2011 Freescale Semiconductor Inc. 
 | 
 * 
 | 
 * Redistribution and use in source and binary forms, with or without 
 | 
 * modification, are permitted provided that the following conditions are met: 
 | 
 *     * Redistributions of source code must retain the above copyright 
 | 
 *       notice, this list of conditions and the following disclaimer. 
 | 
 *     * Redistributions in binary form must reproduce the above copyright 
 | 
 *       notice, this list of conditions and the following disclaimer in the 
 | 
 *       documentation and/or other materials provided with the distribution. 
 | 
 *     * Neither the name of Freescale Semiconductor nor the 
 | 
 *       names of its contributors may be used to endorse or promote products 
 | 
 *       derived from this software without specific prior written permission. 
 | 
 * 
 | 
 * 
 | 
 * ALTERNATIVELY, this software may be distributed under the terms of the 
 | 
 * GNU General Public License ("GPL") as published by the Free Software 
 | 
 * Foundation, either version 2 of that License or (at your option) any 
 | 
 * later version. 
 | 
 * 
 | 
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 
 | 
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
 | 
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
 | 
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 
 | 
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
 | 
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
 | 
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
 | 
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
 | 
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
 | 
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
 | 
 */ 
 | 
  
 | 
&board_lbc { 
 | 
    nor@0,0 { 
 | 
        #address-cells = <1>; 
 | 
        #size-cells = <1>; 
 | 
        compatible = "cfi-flash"; 
 | 
        reg = <0x0 0x0 0x8000000>; 
 | 
        bank-width = <2>; 
 | 
        device-width = <1>; 
 | 
  
 | 
        partition@0 { 
 | 
            reg = <0x0 0x03000000>; 
 | 
            label = "ramdisk-nor"; 
 | 
        }; 
 | 
  
 | 
        partition@3000000 { 
 | 
            reg = <0x03000000 0x00e00000>; 
 | 
            label = "diagnostic-nor"; 
 | 
            read-only; 
 | 
        }; 
 | 
  
 | 
        partition@3e00000 { 
 | 
            reg = <0x03e00000 0x00200000>; 
 | 
            label = "dink-nor"; 
 | 
            read-only; 
 | 
        }; 
 | 
  
 | 
        partition@4000000 { 
 | 
            reg = <0x04000000 0x00400000>; 
 | 
            label = "kernel-nor"; 
 | 
        }; 
 | 
  
 | 
        partition@4400000 { 
 | 
            reg = <0x04400000 0x03b00000>; 
 | 
            label = "fs-nor"; 
 | 
        }; 
 | 
  
 | 
        partition@7f00000 { 
 | 
            reg = <0x07f00000 0x00060000>; 
 | 
            label = "dtb-nor"; 
 | 
        }; 
 | 
  
 | 
        partition@7f60000 { 
 | 
            reg = <0x07f60000 0x00020000>; 
 | 
            label = "env-nor"; 
 | 
            read-only; 
 | 
        }; 
 | 
  
 | 
        partition@7f80000 { 
 | 
            reg = <0x07f80000 0x00080000>; 
 | 
            label = "u-boot-nor"; 
 | 
            read-only; 
 | 
        }; 
 | 
    }; 
 | 
  
 | 
    nand@2,0 { 
 | 
        #address-cells = <1>; 
 | 
        #size-cells = <1>; 
 | 
        compatible = "fsl,mpc8572-fcm-nand", 
 | 
                 "fsl,elbc-fcm-nand"; 
 | 
        reg = <0x2 0x0 0x40000>; 
 | 
  
 | 
        partition@0 { 
 | 
            reg = <0x0 0x02000000>; 
 | 
            label = "u-boot-nand"; 
 | 
            read-only; 
 | 
        }; 
 | 
  
 | 
        partition@2000000 { 
 | 
            reg = <0x02000000 0x10000000>; 
 | 
            label = "fs-nand"; 
 | 
        }; 
 | 
  
 | 
        partition@12000000 { 
 | 
            reg = <0x12000000 0x08000000>; 
 | 
            label = "ramdisk-nand"; 
 | 
        }; 
 | 
  
 | 
        partition@1a000000 { 
 | 
            reg = <0x1a000000 0x04000000>; 
 | 
            label = "kernel-nand"; 
 | 
        }; 
 | 
  
 | 
        partition@1e000000 { 
 | 
            reg = <0x1e000000 0x01000000>; 
 | 
            label = "dtb-nand"; 
 | 
        }; 
 | 
  
 | 
        partition@1f000000 { 
 | 
            reg = <0x1f000000 0x21000000>; 
 | 
            label = "empty-nand"; 
 | 
        }; 
 | 
    }; 
 | 
  
 | 
    nand@4,0 { 
 | 
        compatible = "fsl,mpc8572-fcm-nand", 
 | 
                 "fsl,elbc-fcm-nand"; 
 | 
        reg = <0x4 0x0 0x40000>; 
 | 
    }; 
 | 
  
 | 
    nand@5,0 { 
 | 
        compatible = "fsl,mpc8572-fcm-nand", 
 | 
                 "fsl,elbc-fcm-nand"; 
 | 
        reg = <0x5 0x0 0x40000>; 
 | 
    }; 
 | 
  
 | 
    nand@6,0 { 
 | 
        compatible = "fsl,mpc8572-fcm-nand", 
 | 
                 "fsl,elbc-fcm-nand"; 
 | 
        reg = <0x6 0x0 0x40000>; 
 | 
    }; 
 | 
}; 
 | 
  
 | 
&board_soc { 
 | 
    enet0: ethernet@24000 { 
 | 
        tbi-handle = <&tbi0>; 
 | 
        phy-handle = <&phy0>; 
 | 
        phy-connection-type = "rgmii-id"; 
 | 
    }; 
 | 
  
 | 
    mdio@24520 { 
 | 
        phy0: ethernet-phy@0 { 
 | 
            interrupts = <10 1 0 0>; 
 | 
            reg = <0x0>; 
 | 
        }; 
 | 
        phy1: ethernet-phy@1 { 
 | 
            interrupts = <10 1 0 0>; 
 | 
            reg = <0x1>; 
 | 
        }; 
 | 
        phy2: ethernet-phy@2 { 
 | 
            interrupts = <10 1 0 0>; 
 | 
            reg = <0x2>; 
 | 
        }; 
 | 
        phy3: ethernet-phy@3 { 
 | 
            interrupts = <10 1 0 0>; 
 | 
            reg = <0x3>; 
 | 
        }; 
 | 
  
 | 
        sgmii_phy0: sgmii-phy@0 { 
 | 
            interrupts = <6 1 0 0>; 
 | 
            reg = <0x1c>; 
 | 
        }; 
 | 
        sgmii_phy1: sgmii-phy@1 { 
 | 
            interrupts = <6 1 0 0>; 
 | 
            reg = <0x1d>; 
 | 
        }; 
 | 
        sgmii_phy2: sgmii-phy@2 { 
 | 
            interrupts = <7 1 0 0>; 
 | 
            reg = <0x1e>; 
 | 
        }; 
 | 
        sgmii_phy3: sgmii-phy@3 { 
 | 
            interrupts = <7 1 0 0>; 
 | 
            reg = <0x1f>; 
 | 
        }; 
 | 
  
 | 
        tbi0: tbi-phy@11 { 
 | 
            reg = <0x11>; 
 | 
            device_type = "tbi-phy"; 
 | 
        }; 
 | 
    }; 
 | 
  
 | 
    ptp_clock@24e00 { 
 | 
        fsl,tclk-period = <5>; 
 | 
        fsl,tmr-prsc = <200>; 
 | 
        fsl,tmr-add = <0xAAAAAAAB>; 
 | 
        fsl,tmr-fiper1 = <0x3B9AC9FB>; 
 | 
        fsl,tmr-fiper2 = <0x3B9AC9FB>; 
 | 
        fsl,max-adj = <499999999>; 
 | 
    }; 
 | 
  
 | 
    enet1: ethernet@25000 { 
 | 
        tbi-handle = <&tbi1>; 
 | 
        phy-handle = <&phy1>; 
 | 
        phy-connection-type = "rgmii-id"; 
 | 
  
 | 
    }; 
 | 
  
 | 
    mdio@25520 { 
 | 
        tbi1: tbi-phy@11 { 
 | 
            reg = <0x11>; 
 | 
            device_type = "tbi-phy"; 
 | 
        }; 
 | 
    }; 
 | 
  
 | 
    enet2: ethernet@26000 { 
 | 
        tbi-handle = <&tbi2>; 
 | 
        phy-handle = <&phy2>; 
 | 
        phy-connection-type = "rgmii-id"; 
 | 
  
 | 
    }; 
 | 
    mdio@26520 { 
 | 
        tbi2: tbi-phy@11 { 
 | 
            reg = <0x11>; 
 | 
            device_type = "tbi-phy"; 
 | 
        }; 
 | 
    }; 
 | 
  
 | 
    enet3: ethernet@27000 { 
 | 
        tbi-handle = <&tbi3>; 
 | 
        phy-handle = <&phy3>; 
 | 
        phy-connection-type = "rgmii-id"; 
 | 
    }; 
 | 
  
 | 
    mdio@27520 { 
 | 
        tbi3: tbi-phy@11 { 
 | 
            reg = <0x11>; 
 | 
            device_type = "tbi-phy"; 
 | 
        }; 
 | 
    }; 
 | 
}; 
 | 
  
 | 
&board_pci0 { 
 | 
    pcie@0 { 
 | 
        interrupt-map-mask = <0xff00 0x0 0x0 0x7>; 
 | 
        interrupt-map = < 
 | 
            /* IDSEL 0x11 func 0 - PCI slot 1 */ 
 | 
            0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 
 | 
            0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 
 | 
            0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 
 | 
            0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x11 func 1 - PCI slot 1 */ 
 | 
            0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 
 | 
            0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 
 | 
            0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 
 | 
            0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x11 func 2 - PCI slot 1 */ 
 | 
            0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 
 | 
            0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 
 | 
            0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 
 | 
            0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x11 func 3 - PCI slot 1 */ 
 | 
            0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 
 | 
            0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 
 | 
            0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 
 | 
            0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x11 func 4 - PCI slot 1 */ 
 | 
            0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 
 | 
            0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 
 | 
            0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 
 | 
            0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x11 func 5 - PCI slot 1 */ 
 | 
            0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 
 | 
            0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 
 | 
            0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 
 | 
            0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x11 func 6 - PCI slot 1 */ 
 | 
            0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 
 | 
            0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 
 | 
            0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 
 | 
            0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x11 func 7 - PCI slot 1 */ 
 | 
            0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 
 | 
            0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 
 | 
            0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 
 | 
            0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x12 func 0 - PCI slot 2 */ 
 | 
            0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 
 | 
            0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 
 | 
            0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 
 | 
            0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x12 func 1 - PCI slot 2 */ 
 | 
            0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 
 | 
            0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 
 | 
            0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 
 | 
            0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x12 func 2 - PCI slot 2 */ 
 | 
            0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 
 | 
            0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 
 | 
            0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 
 | 
            0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x12 func 3 - PCI slot 2 */ 
 | 
            0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 
 | 
            0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 
 | 
            0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 
 | 
            0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x12 func 4 - PCI slot 2 */ 
 | 
            0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 
 | 
            0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 
 | 
            0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 
 | 
            0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x12 func 5 - PCI slot 2 */ 
 | 
            0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 
 | 
            0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 
 | 
            0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 
 | 
            0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x12 func 6 - PCI slot 2 */ 
 | 
            0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 
 | 
            0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 
 | 
            0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 
 | 
            0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 
 | 
  
 | 
            /* IDSEL 0x12 func 7 - PCI slot 2 */ 
 | 
            0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 
 | 
            0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 
 | 
            0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 
 | 
            0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 
 | 
  
 | 
            // IDSEL 0x1c  USB 
 | 
            0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 
 | 
            0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 
 | 
            0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 
 | 
            0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 
 | 
  
 | 
            // IDSEL 0x1d  Audio 
 | 
            0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 
 | 
  
 | 
            // IDSEL 0x1e Legacy 
 | 
            0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 
 | 
            0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 
 | 
  
 | 
            // IDSEL 0x1f IDE/SATA 
 | 
            0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 
 | 
            0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 
 | 
            >; 
 | 
  
 | 
  
 | 
        uli1575@0 { 
 | 
            reg = <0x0 0x0 0x0 0x0 0x0>; 
 | 
            #size-cells = <2>; 
 | 
            #address-cells = <3>; 
 | 
            ranges = <0x2000000 0x0 0x80000000 
 | 
                  0x2000000 0x0 0x80000000 
 | 
                  0x0 0x20000000 
 | 
  
 | 
                  0x1000000 0x0 0x0 
 | 
                  0x1000000 0x0 0x0 
 | 
                  0x0 0x10000>; 
 | 
            isa@1e { 
 | 
                device_type = "isa"; 
 | 
                #interrupt-cells = <2>; 
 | 
                #size-cells = <1>; 
 | 
                #address-cells = <2>; 
 | 
                reg = <0xf000 0x0 0x0 0x0 0x0>; 
 | 
                ranges = <0x1 0x0 0x1000000 0x0 0x0 
 | 
                      0x1000>; 
 | 
                interrupt-parent = <&i8259>; 
 | 
  
 | 
                i8259: interrupt-controller@20 { 
 | 
                    reg = <0x1 0x20 0x2 
 | 
                           0x1 0xa0 0x2 
 | 
                           0x1 0x4d0 0x2>; 
 | 
                    interrupt-controller; 
 | 
                    device_type = "interrupt-controller"; 
 | 
                    #address-cells = <0>; 
 | 
                    #interrupt-cells = <2>; 
 | 
                    compatible = "chrp,iic"; 
 | 
                    interrupts = <9 2 0 0>; 
 | 
                    interrupt-parent = <&mpic>; 
 | 
                }; 
 | 
  
 | 
                i8042@60 { 
 | 
                    #size-cells = <0>; 
 | 
                    #address-cells = <1>; 
 | 
                    reg = <0x1 0x60 0x1 0x1 0x64 0x1>; 
 | 
                    interrupts = <1 3 12 3>; 
 | 
                    interrupt-parent = 
 | 
                        <&i8259>; 
 | 
  
 | 
                    keyboard@0 { 
 | 
                        reg = <0x0>; 
 | 
                        compatible = "pnpPNP,303"; 
 | 
                    }; 
 | 
  
 | 
                    mouse@1 { 
 | 
                        reg = <0x1>; 
 | 
                        compatible = "pnpPNP,f03"; 
 | 
                    }; 
 | 
                }; 
 | 
  
 | 
                rtc@70 { 
 | 
                    compatible = "pnpPNP,b00"; 
 | 
                    reg = <0x1 0x70 0x2>; 
 | 
                }; 
 | 
  
 | 
                gpio@400 { 
 | 
                    reg = <0x1 0x400 0x80>; 
 | 
                }; 
 | 
            }; 
 | 
        }; 
 | 
    }; 
 | 
}; 
 |