/*
|
* MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
|
*
|
* Copyright 2011 Freescale Semiconductor Inc.
|
*
|
* Redistribution and use in source and binary forms, with or without
|
* modification, are permitted provided that the following conditions are met:
|
* * Redistributions of source code must retain the above copyright
|
* notice, this list of conditions and the following disclaimer.
|
* * Redistributions in binary form must reproduce the above copyright
|
* notice, this list of conditions and the following disclaimer in the
|
* documentation and/or other materials provided with the distribution.
|
* * Neither the name of Freescale Semiconductor nor the
|
* names of its contributors may be used to endorse or promote products
|
* derived from this software without specific prior written permission.
|
*
|
*
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
* GNU General Public License ("GPL") as published by the Free Software
|
* Foundation, either version 2 of that License or (at your option) any
|
* later version.
|
*
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
*/
|
|
&lbc {
|
nor@0,0 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "cfi-flash";
|
reg = <0x0 0x0 0x8000000>;
|
bank-width = <2>;
|
device-width = <1>;
|
|
partition@0 {
|
reg = <0x0 0x03000000>;
|
label = "ramdisk-nor";
|
};
|
|
partition@3000000 {
|
reg = <0x03000000 0x00e00000>;
|
label = "diagnostic-nor";
|
read-only;
|
};
|
|
partition@3e00000 {
|
reg = <0x03e00000 0x00200000>;
|
label = "dink-nor";
|
read-only;
|
};
|
|
partition@4000000 {
|
reg = <0x04000000 0x00400000>;
|
label = "kernel-nor";
|
};
|
|
partition@4400000 {
|
reg = <0x04400000 0x03b00000>;
|
label = "fs-nor";
|
};
|
|
partition@7f00000 {
|
reg = <0x07f00000 0x00080000>;
|
label = "dtb-nor";
|
};
|
|
partition@7f80000 {
|
reg = <0x07f80000 0x00080000>;
|
label = "u-boot-nor";
|
read-only;
|
};
|
};
|
|
nand@2,0 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "fsl,mpc8536-fcm-nand",
|
"fsl,elbc-fcm-nand";
|
reg = <0x2 0x0 0x40000>;
|
|
partition@0 {
|
reg = <0x0 0x02000000>;
|
label = "u-boot-nand";
|
read-only;
|
};
|
|
partition@2000000 {
|
reg = <0x02000000 0x10000000>;
|
label = "fs-nand";
|
};
|
|
partition@12000000 {
|
reg = <0x12000000 0x08000000>;
|
label = "ramdisk-nand";
|
};
|
|
partition@1a000000 {
|
reg = <0x1a000000 0x04000000>;
|
label = "kernel-nand";
|
};
|
|
partition@1e000000 {
|
reg = <0x1e000000 0x01000000>;
|
label = "dtb-nand";
|
};
|
|
partition@1f000000 {
|
reg = <0x1f000000 0x21000000>;
|
label = "empty-nand";
|
};
|
};
|
|
board-control@3,0 {
|
compatible = "fsl,mpc8536ds-fpga-pixis";
|
reg = <0x3 0x0 0x8000>;
|
};
|
};
|
|
&board_soc {
|
i2c@3100 {
|
rtc@68 {
|
compatible = "dallas,ds3232";
|
reg = <0x68>;
|
interrupts = <0 0x1 0 0>;
|
};
|
adt7461@4c {
|
compatible = "adi,adt7461";
|
reg = <0x4c>;
|
};
|
};
|
|
spi@7000 {
|
flash@0 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "spansion,s25sl12801", "jedec,spi-nor";
|
reg = <0>;
|
spi-max-frequency = <40000000>;
|
partition@u-boot {
|
label = "u-boot";
|
reg = <0x00000000 0x00100000>;
|
read-only;
|
};
|
partition@kernel {
|
label = "kernel";
|
reg = <0x00100000 0x00500000>;
|
read-only;
|
};
|
partition@dtb {
|
label = "dtb";
|
reg = <0x00600000 0x00100000>;
|
read-only;
|
};
|
partition@fs {
|
label = "file system";
|
reg = <0x00700000 0x00900000>;
|
};
|
};
|
flash@1 {
|
compatible = "spansion,s25sl12801", "jedec,spi-nor";
|
reg = <1>;
|
spi-max-frequency = <40000000>;
|
};
|
flash@2 {
|
compatible = "spansion,s25sl12801", "jedec,spi-nor";
|
reg = <2>;
|
spi-max-frequency = <40000000>;
|
};
|
flash@3 {
|
compatible = "spansion,s25sl12801", "jedec,spi-nor";
|
reg = <3>;
|
spi-max-frequency = <40000000>;
|
};
|
};
|
|
usb@22000 {
|
phy_type = "ulpi";
|
};
|
|
usb@23000 {
|
phy_type = "ulpi";
|
};
|
|
enet0: ethernet@24000 {
|
tbi-handle = <&tbi0>;
|
phy-handle = <&phy1>;
|
phy-connection-type = "rgmii-id";
|
};
|
|
mdio@24520 {
|
phy0: ethernet-phy@0 {
|
interrupts = <10 0x1 0 0>;
|
reg = <0>;
|
};
|
phy1: ethernet-phy@1 {
|
interrupts = <10 0x1 0 0>;
|
reg = <1>;
|
};
|
sgmii_phy0: sgmii-phy@0 {
|
interrupts = <6 1 0 0>;
|
reg = <0x1d>;
|
};
|
sgmii_phy1: sgmii-phy@1 {
|
interrupts = <6 1 0 0>;
|
reg = <0x1c>;
|
};
|
tbi0: tbi-phy@11 {
|
reg = <0x11>;
|
device_type = "tbi-phy";
|
};
|
};
|
|
enet2: ethernet@26000 {
|
tbi-handle = <&tbi1>;
|
phy-handle = <&phy0>;
|
phy-connection-type = "rgmii-id";
|
};
|
|
mdio@26520 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
compatible = "fsl,gianfar-tbi";
|
reg = <0x26520 0x20>;
|
|
tbi1: tbi-phy@11 {
|
reg = <0x11>;
|
device_type = "tbi-phy";
|
};
|
};
|
|
usb@2b000 {
|
dr_mode = "peripheral";
|
phy_type = "ulpi";
|
};
|
};
|
