// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
/*
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
*
|
*/
|
|
#include "dt-bindings/usb/pd.h"
|
#include "rk3588s.dtsi"
|
#include "rk3588s-evb.dtsi"
|
#include "rk3588-rk806-single.dtsi"
|
|
/ {
|
combophy_avdd0v85: combophy-avdd0v85 {
|
compatible = "regulator-fixed";
|
regulator-name = "combophy_avdd0v85";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <850000>;
|
regulator-max-microvolt = <850000>;
|
vin-supply = <&vdd_0v85_s0>;
|
};
|
|
combophy_avdd1v8: combophy-avdd1v8 {
|
compatible = "regulator-fixed";
|
regulator-name = "combophy_avdd1v8";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
vin-supply = <&avcc_1v8_s0>;
|
};
|
|
es7202_sound_micarray: es7202-sound-micarray {
|
status = "okay";
|
compatible = "simple-audio-card";
|
simple-audio-card,format = "i2s";
|
simple-audio-card,name = "rockchip,sound-micarray";
|
simple-audio-card,mclk-fs = <256>;
|
simple-audio-card,dai-link@0 {
|
format = "pdm";
|
cpu {
|
sound-dai = <&pdm0>;
|
};
|
codec {
|
sound-dai = <&es7202>;
|
};
|
};
|
};
|
|
es8388_sound: es8388-sound {
|
status = "okay";
|
compatible = "rockchip,multicodecs-card";
|
rockchip,card-name = "rockchip-es8388";
|
hp-det-gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
|
io-channels = <&saradc 3>;
|
io-channel-names = "adc-detect";
|
keyup-threshold-microvolt = <1800000>;
|
poll-interval = <100>;
|
spk-con-gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
hp-con-gpio = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
|
rockchip,format = "i2s";
|
rockchip,mclk-fs = <256>;
|
rockchip,cpu = <&i2s0_8ch>;
|
rockchip,codec = <&es8388>;
|
rockchip,audio-routing =
|
"Headphone", "LOUT1",
|
"Headphone", "ROUT1",
|
"Speaker", "LOUT2",
|
"Speaker", "ROUT2",
|
"Headphone", "Headphone Power",
|
"Headphone", "Headphone Power",
|
"Speaker", "Speaker Power",
|
"Speaker", "Speaker Power",
|
"LINPUT1", "Main Mic",
|
"LINPUT2", "Main Mic",
|
"RINPUT1", "Headset Mic",
|
"RINPUT2", "Headset Mic";
|
pinctrl-names = "default";
|
pinctrl-0 = <&hp_det>;
|
play-pause-key {
|
label = "playpause";
|
linux,code = <KEY_PLAYPAUSE>;
|
press-threshold-microvolt = <2000>;
|
};
|
};
|
|
fan: pwm-fan {
|
compatible = "pwm-fan";
|
#cooling-cells = <2>;
|
pwms = <&pwm11 0 50000 0>;
|
cooling-levels = <0 50 100 150 200 255>;
|
rockchip,temp-trips = <
|
50000 1
|
55000 2
|
60000 3
|
65000 4
|
70000 5
|
>;
|
};
|
|
vbus5v0_typec: vbus5v0-typec {
|
compatible = "regulator-fixed";
|
regulator-name = "vbus5v0_typec";
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
enable-active-high;
|
gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc5v0_usb>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&typec5v_pwren>;
|
};
|
|
vcc3v3_lcd_n: vcc3v3-lcd0-n {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3_lcd0_n";
|
regulator-boot-on;
|
enable-active-high;
|
gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc_3v3_s0>;
|
};
|
|
vcc3v3_pcie20: vcc3v3-pcie20 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3_pcie20";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
enable-active-high;
|
gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
startup-delay-us = <5000>;
|
vin-supply = <&vcc12v_dcin>;
|
};
|
|
vcc5v0_host: vcc5v0-host {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_host";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
enable-active-high;
|
gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc5v0_usb>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&vcc5v0_host_en>;
|
};
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc_1v1_nldo_s3";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <1100000>;
|
regulator-max-microvolt = <1100000>;
|
vin-supply = <&vcc5v0_sys>;
|
};
|
|
vcc_1v2_cam_s0: vcc-1v2-cam-s0 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc_1v2_cam_s0";
|
regulator-min-microvolt = <1200000>;
|
regulator-max-microvolt = <1200000>;
|
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
|
enable-active-high;
|
vin-supply = <&vcc_3v3_s3>;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vcc_1v8_cam_s0: vcc-1v8-cam-s0 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc_1v8_cam_s0";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
vin-supply = <&vcc_3v3_s3>;
|
};
|
|
vcc_2v8_cam_s0: vcc-2v8-cam-s0 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc_2v8_cam_s0";
|
regulator-min-microvolt = <2800000>;
|
regulator-max-microvolt = <2800000>;
|
vin-supply = <&vcc_3v3_s3>;
|
};
|
|
vcc_3v3_sd_s0: vcc-3v3-sd-s0 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc_3v3_sd_s0";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
|
enable-active-low;
|
vin-supply = <&vcc_3v3_s3>;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
wireless_bluetooth: wireless-bluetooth {
|
compatible = "bluetooth-platdata";
|
clocks = <&hym8563>;
|
clock-names = "ext_clock";
|
uart_rts_gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default", "rts_gpio";
|
pinctrl-0 = <&uart8m1_rtsn>, <&bt_reset_gpio>, <&bt_wake_gpio>, <&bt_wake_host_irq>;
|
pinctrl-1 = <&uart8_gpios>;
|
BT,reset_gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
|
BT,wake_gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
BT,wake_host_irq = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
|
wireless_wlan: wireless-wlan {
|
compatible = "wlan-platdata";
|
wifi_chip_type = "ap6255";
|
pinctrl-names = "default";
|
pinctrl-0 = <&wifi_host_wake_irq>, <&wifi_poweren_gpio>;
|
WIFI,host_wake_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
WIFI,poweren_gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
};
|
|
&backlight {
|
pwms = <&pwm13 0 25000 0>;
|
status = "okay";
|
};
|
|
&combphy0_ps {
|
status = "okay";
|
};
|
|
&combphy2_psu {
|
status = "okay";
|
};
|
|
&dp0 {
|
status = "okay";
|
};
|
|
&dp0_in_vp2 {
|
status = "okay";
|
};
|
|
/*
|
* mipi_dcphy0 needs to be enabled
|
* when dsi0 is enabled
|
*/
|
&dsi0 {
|
status = "okay";
|
};
|
|
&dsi0_in_vp2 {
|
status = "disabled";
|
};
|
|
&dsi0_in_vp3 {
|
status = "okay";
|
};
|
|
&dsi0_panel {
|
power-supply = <&vcc3v3_lcd_n>;
|
reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&lcd_rst_gpio>;
|
};
|
|
/*
|
* mipi_dcphy1 needs to be enabled
|
* when dsi1 is enabled
|
*/
|
&dsi1 {
|
//rockchip,lane-rate = <650>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&mipi_te1>;
|
status = "disabled";
|
};
|
|
&dsi1_in_vp2 {
|
status = "disabled";
|
};
|
|
&dsi1_in_vp3 {
|
status = "disabled";
|
};
|
|
&dsi1_panel {
|
power-supply = <&vcc3v3_lcd_n>;
|
compressed-data;
|
/*
|
* because in hardware, the two screens share the reset pin,
|
* so reset-gpios need only in dsi1 enable and dsi0 disabled
|
* case.
|
*/
|
|
//reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
|
//pinctrl-names = "default";
|
//pinctrl-0 = <&lcd_rst_gpio>;
|
|
dsi,flags = <(MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET)>;
|
|
slice-width = <720>;
|
slice-height = <65>;
|
version-major = <1>;
|
version-minor = <1>;
|
|
panel-init-sequence = [
|
29 10 03 f0 5a 5a
|
/* Dsc Setting */
|
/* Compression Enable */
|
07 10 01 01
|
/* Scaler Disable */
|
15 10 02 c3 00
|
/* PPS Setting */
|
0a 31 59 10 00 00 89 30 80 0c 30 05 a0 00 41 02 d0 02 d0 02 00 02 c2 00 20 06 58 00 0a 00 0f 01 e0 01 2d 18 00 10 f0 03 0c 20 00 06 0b 0b 33 0e 1c 2a 38 46 54 62 69 70 77 79 7b 7d 7e 01 02 01 00 09 40 09 be 19 fc 19 fa 19 f8 1a 38 1a 78 1a b6 2a b6 2a f4 2a f4 4b 34 63 74 00
|
29 10 03 f0 a5 a5
|
/** Sleep Out */
|
05 00 01 11
|
/* 4. Common Setting */
|
/* 4.1 TE(Vync) ON/OFF */
|
15 00 02 35 00
|
/* 4.2 CASET/PASET Setting */
|
39 00 05 2a 00 00 05 9F
|
39 00 05 2b 00 00 0c 2f
|
/* 4.3 TSP SYNC Setting */
|
39 00 03 f0 5a 5a
|
39 00 0a B9 01 c0 3c 0b 00 00 00 11 03
|
39 00 03 f0 a5 a5
|
/* FD(Fast Discharge) Setting */
|
39 00 03 f0 5a 5a
|
15 00 02 b0 45
|
15 00 02 b5 48
|
39 00 03 f0 a5 a5
|
/* 4.6 FFC Setting (MIPI CLK 529MHz) */
|
39 00 03 f0 5a 5a
|
39 00 03 fc 5a 5a
|
15 00 02 b0 1E
|
39 00 06 c5 09 10 b4 24 fb
|
39 00 03 f0 a5 a5
|
39 00 03 fc a5 a5
|
/* OSC Spread Setting */
|
39 00 03 f0 5a 5a
|
39 00 03 fc 5a 5a
|
15 00 02 b0 37
|
/* FFC Setting; 0x04 : Disable */
|
39 00 06 c5 04 ff 00 01 64
|
39 00 03 f0 a5 a5
|
39 00 03 fc a5 a5
|
/* Dither IP Setting */
|
39 00 03 FC 5A 5A
|
15 00 02 b0 86
|
15 00 02 eb 01
|
39 00 03 FC a5 a5
|
/* 5 Brightness Control */
|
/* 5.1 Dimming Setting */
|
39 10 03 f0 5a 5a
|
15 10 02 b0 05
|
15 10 02 b1 01
|
15 10 02 b0 02
|
15 10 02 b5 d3
|
15 10 02 53 20
|
39 10 03 f0 a5 a5
|
39 10 03 51 02 ff
|
05 32 01 29
|
];
|
|
panel-exit-sequence = [
|
/* Display off */
|
05 14 01 28
|
/* Sleep In */
|
05 00 01 10
|
/* VCI stabilization setting */
|
39 00 03 f0 5a 5a
|
15 00 02 b0 05
|
15 00 02 f4 01
|
39 a0 03 f0 a5 a5
|
];
|
|
disp_timings1: display-timings {
|
native-mode = <&dsi1_timing0>;
|
dsi1_timing0: timing0 {
|
clock-frequency = <280000000>;
|
hactive = <1140>;
|
vactive = <3120>;
|
hfront-porch = <16>;
|
hsync-len = <8>;
|
hback-porch = <8>;
|
vfront-porch = <4>;
|
vsync-len = <2>;
|
vback-porch = <16>;
|
hsync-active = <0>;
|
vsync-active = <0>;
|
de-active = <0>;
|
pixelclk-active = <0>;
|
};
|
};
|
};
|
|
&i2c0 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 {
|
compatible = "rockchip,rk8602";
|
reg = <0x42>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "rk860x-reg";
|
regulator-name = "vdd_cpu_big0_s0";
|
regulator-min-microvolt = <550000>;
|
regulator-max-microvolt = <1050000>;
|
regulator-ramp-delay = <2300>;
|
rockchip,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 {
|
compatible = "rockchip,rk8603";
|
reg = <0x43>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "rk860x-reg";
|
regulator-name = "vdd_cpu_big1_s0";
|
regulator-min-microvolt = <550000>;
|
regulator-max-microvolt = <1050000>;
|
regulator-ramp-delay = <2300>;
|
rockchip,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
};
|
|
&i2c2 {
|
status = "okay";
|
|
vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 {
|
compatible = "rockchip,rk8602";
|
reg = <0x42>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "rk860x-reg";
|
regulator-name = "vdd_npu_s0";
|
regulator-min-microvolt = <550000>;
|
regulator-max-microvolt = <950000>;
|
regulator-ramp-delay = <2300>;
|
rockchip,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
};
|
|
&i2c3 {
|
status = "okay";
|
|
es8388: es8388@11 {
|
status = "okay";
|
#sound-dai-cells = <0>;
|
compatible = "everest,es8388", "everest,es8323";
|
reg = <0x11>;
|
clocks = <&mclkout_i2s0>;
|
clock-names = "mclk";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2s0_mclk>;
|
};
|
|
es7202: es7202@32 {
|
status = "okay";
|
#sound-dai-cells = <0>;
|
compatible = "ES7202_PDM_ADC_1";
|
power-supply = <&vcc_1v8_s0>; /* only 1v8 or 3v3, default is 3v3 */
|
reg = <0x32>;
|
};
|
};
|
|
&i2c4 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c4m3_xfer>;
|
|
gt1x: gt1x@14 {
|
compatible = "goodix,gt1x";
|
reg = <0x14>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&touch_gpio>;
|
goodix,rst-gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
goodix,irq-gpio = <&gpio1 RK_PB5 IRQ_TYPE_LEVEL_LOW>;
|
power-supply = <&vcc3v3_lcd_n>;
|
};
|
};
|
|
&i2c5 {
|
status = "okay";
|
|
ls_stk3332: light@47 {
|
compatible = "ls_stk3332";
|
status = "disabled";
|
reg = <0x47>;
|
type = <SENSOR_TYPE_LIGHT>;
|
irq_enable = <0>;
|
als_threshold_high = <100>;
|
als_threshold_low = <10>;
|
als_ctrl_gain = <2>; /* 0:x1 1:x4 2:x16 3:x64 */
|
poll_delay_ms = <100>;
|
};
|
|
ps_stk3332: proximity@47 {
|
compatible = "ps_stk3332";
|
status = "disabled";
|
reg = <0x47>;
|
type = <SENSOR_TYPE_PROXIMITY>;
|
//pinctrl-names = "default";
|
//pinctrl-0 = <&gpio3_c6>;
|
//irq-gpio = <&gpio3 RK_PC6 IRQ_TYPE_LEVEL_LOW>;
|
//irq_enable = <1>;
|
ps_threshold_high = <0x200>;
|
ps_threshold_low = <0x100>;
|
ps_ctrl_gain = <3>; /* 0:x1 1:x2 2:x5 3:x8 */
|
ps_led_current = <4>; /* 0:3.125mA 1:6.25mA 2:12.5mA 3:25mA 4:50mA 5:100mA*/
|
poll_delay_ms = <100>;
|
};
|
|
mpu6500_acc: mpu_acc@68 {
|
compatible = "mpu6500_acc";
|
reg = <0x68>;
|
irq-gpio = <&gpio3 RK_PB4 IRQ_TYPE_EDGE_RISING>;
|
irq_enable = <0>;
|
poll_delay_ms = <30>;
|
type = <SENSOR_TYPE_ACCEL>;
|
layout = <8>;
|
};
|
|
mpu6500_gyro: mpu_gyro@68 {
|
compatible = "mpu6500_gyro";
|
reg = <0x68>;
|
irq_enable = <0>;
|
poll_delay_ms = <30>;
|
type = <SENSOR_TYPE_GYROSCOPE>;
|
layout = <8>;
|
};
|
};
|
|
&i2c8 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c8m2_xfer>;
|
|
usbc0: fusb302@22 {
|
compatible = "fcs,fusb302";
|
reg = <0x22>;
|
interrupt-parent = <&gpio0>;
|
interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&usbc0_int>;
|
vbus-supply = <&vbus5v0_typec>;
|
status = "okay";
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
usbc0_role_sw: endpoint@0 {
|
remote-endpoint = <&dwc3_0_role_switch>;
|
};
|
};
|
};
|
|
usb_con: connector {
|
compatible = "usb-c-connector";
|
label = "USB-C";
|
data-role = "dual";
|
power-role = "dual";
|
try-power-role = "sink";
|
op-sink-microwatt = <1000000>;
|
sink-pdos =
|
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
source-pdos =
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
altmodes {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
altmode@0 {
|
reg = <0>;
|
svid = <0xff01>;
|
vdo = <0xffffffff>;
|
};
|
};
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
usbc0_orien_sw: endpoint {
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
};
|
};
|
|
port@1 {
|
reg = <1>;
|
dp_altmode_mux: endpoint {
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
};
|
};
|
};
|
};
|
};
|
|
hym8563: hym8563@51 {
|
compatible = "haoyu,hym8563";
|
reg = <0x51>;
|
#clock-cells = <0>;
|
clock-frequency = <32768>;
|
clock-output-names = "hym8563";
|
pinctrl-names = "default";
|
pinctrl-0 = <&hym8563_int>;
|
interrupt-parent = <&gpio0>;
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
wakeup-source;
|
status = "okay";
|
};
|
};
|
|
&mipi_dcphy0 {
|
status = "okay";
|
};
|
|
&mipi_dcphy1 {
|
status = "disabled";
|
};
|
|
&pdm0 {
|
status = "okay";
|
};
|
|
&pcie2x1l1 {
|
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
vpcie3v3-supply = <&vcc3v3_pcie20>;
|
status = "okay";
|
};
|
|
&pcie2x1l2 {
|
reset-gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
|
rockchip,skip-scan-in-resume;
|
status = "okay";
|
};
|
|
&pinctrl {
|
headphone {
|
hp_det: hp-det {
|
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
hym8563 {
|
hym8563_int: hym8563-int {
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
lcd {
|
lcd_rst_gpio: lcd-rst-gpio {
|
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
sensor {
|
mpu6500_irq_gpio: mpu6500_irq_gpio {
|
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
touch {
|
touch_gpio: touch-gpio {
|
rockchip,pins =
|
<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
|
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
usb {
|
vcc5v0_host_en: vcc5v0-host-en {
|
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
usb-typec {
|
usbc0_int: usbc0-int {
|
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
|
typec5v_pwren: typec5v-pwren {
|
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
wireless-bluetooth {
|
uart8_gpios: uart8-gpios {
|
rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
|
bt_reset_gpio: bt-reset-gpio {
|
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
|
bt_wake_gpio: bt-wake-gpio {
|
rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
|
bt_wake_host_irq: bt-wake-host-irq {
|
rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
|
};
|
};
|
|
wireless-wlan {
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
};
|
|
wifi_poweren_gpio: wifi-poweren-gpio {
|
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
};
|
|
&pwm11 {
|
pinctrl-0 = <&pwm11m1_pins>;
|
status = "okay";
|
};
|
|
&pwm13 {
|
status = "okay";
|
pinctrl-names = "active";
|
pinctrl-0 = <&pwm13m1_pins>;
|
};
|
|
&pwm15 {
|
compatible = "rockchip,remotectl-pwm";
|
pinctrl-names = "default";
|
pinctrl-0 = <&pwm15m0_pins>;
|
remote_pwm_id = <3>;
|
handle_cpu_id = <1>;
|
remote_support_psci = <0>;
|
status = "okay";
|
|
ir_key1 {
|
rockchip,usercode = <0x4040>;
|
rockchip,key_table =
|
<0xf2 KEY_REPLY>,
|
<0xba KEY_BACK>,
|
<0xf4 KEY_UP>,
|
<0xf1 KEY_DOWN>,
|
<0xef KEY_LEFT>,
|
<0xee KEY_RIGHT>,
|
<0xbd KEY_HOME>,
|
<0xea KEY_VOLUMEUP>,
|
<0xe3 KEY_VOLUMEDOWN>,
|
<0xe2 KEY_SEARCH>,
|
<0xb2 KEY_POWER>,
|
<0xbc KEY_MUTE>,
|
<0xec KEY_MENU>,
|
<0xbf 0x190>,
|
<0xe0 0x191>,
|
<0xe1 0x192>,
|
<0xe9 183>,
|
<0xe6 248>,
|
<0xe8 185>,
|
<0xe7 186>,
|
<0xf0 388>,
|
<0xbe 0x175>;
|
};
|
|
ir_key2 {
|
rockchip,usercode = <0xff00>;
|
rockchip,key_table =
|
<0xf9 KEY_HOME>,
|
<0xbf KEY_BACK>,
|
<0xfb KEY_MENU>,
|
<0xaa KEY_REPLY>,
|
<0xb9 KEY_UP>,
|
<0xe9 KEY_DOWN>,
|
<0xb8 KEY_LEFT>,
|
<0xea KEY_RIGHT>,
|
<0xeb KEY_VOLUMEDOWN>,
|
<0xef KEY_VOLUMEUP>,
|
<0xf7 KEY_MUTE>,
|
<0xe7 KEY_POWER>,
|
<0xfc KEY_POWER>,
|
<0xa9 KEY_VOLUMEDOWN>,
|
<0xa8 KEY_PLAYPAUSE>,
|
<0xe0 KEY_VOLUMEDOWN>,
|
<0xa5 KEY_VOLUMEDOWN>,
|
<0xab 183>,
|
<0xb7 388>,
|
<0xe8 388>,
|
<0xf8 184>,
|
<0xaf 185>,
|
<0xed KEY_VOLUMEDOWN>,
|
<0xee 186>,
|
<0xb3 KEY_VOLUMEDOWN>,
|
<0xf1 KEY_VOLUMEDOWN>,
|
<0xf2 KEY_VOLUMEDOWN>,
|
<0xf3 KEY_SEARCH>,
|
<0xb4 KEY_VOLUMEDOWN>,
|
<0xa4 KEY_SETUP>,
|
<0xbe KEY_SEARCH>;
|
};
|
|
ir_key3 {
|
rockchip,usercode = <0x1dcc>;
|
rockchip,key_table =
|
<0xee KEY_REPLY>,
|
<0xf0 KEY_BACK>,
|
<0xf8 KEY_UP>,
|
<0xbb KEY_DOWN>,
|
<0xef KEY_LEFT>,
|
<0xed KEY_RIGHT>,
|
<0xfc KEY_HOME>,
|
<0xf1 KEY_VOLUMEUP>,
|
<0xfd KEY_VOLUMEDOWN>,
|
<0xb7 KEY_SEARCH>,
|
<0xff KEY_POWER>,
|
<0xf3 KEY_MUTE>,
|
<0xbf KEY_MENU>,
|
<0xf9 0x191>,
|
<0xf5 0x192>,
|
<0xb3 388>,
|
<0xbe KEY_1>,
|
<0xba KEY_2>,
|
<0xb2 KEY_3>,
|
<0xbd KEY_4>,
|
<0xf9 KEY_5>,
|
<0xb1 KEY_6>,
|
<0xfc KEY_7>,
|
<0xf8 KEY_8>,
|
<0xb0 KEY_9>,
|
<0xb6 KEY_0>,
|
<0xb5 KEY_BACKSPACE>;
|
};
|
};
|
|
&route_dsi0 {
|
status = "okay";
|
connect = <&vp3_out_dsi0>;
|
};
|
|
&route_dsi1 {
|
status = "disabled";
|
connect = <&vp3_out_dsi1>;
|
};
|
|
&sdmmc {
|
status = "okay";
|
vmmc-supply = <&vcc_3v3_sd_s0>;
|
};
|
|
&spdif_tx1 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&spdif1m1_tx>;
|
};
|
|
&spdif_tx1_dc {
|
status = "okay";
|
};
|
|
&spdif_tx1_sound {
|
status = "okay";
|
};
|
|
&spi2 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
num-cs = <1>;
|
};
|
|
&u2phy0_otg {
|
rockchip,typec-vbus-det;
|
};
|
|
&u2phy2_host {
|
phy-supply = <&vcc5v0_host>;
|
};
|
|
&u2phy3_host {
|
phy-supply = <&vcc5v0_host>;
|
};
|
|
&uart8 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart8m1_xfer &uart8m1_ctsn>;
|
};
|
|
&usbdp_phy0 {
|
orientation-switch;
|
svid = <0xff01>;
|
sbu1-dc-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
sbu2-dc-gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
port {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
reg = <0>;
|
remote-endpoint = <&usbc0_orien_sw>;
|
};
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
reg = <1>;
|
remote-endpoint = <&dp_altmode_mux>;
|
};
|
};
|
};
|
|
&usbdrd_dwc3_0 {
|
usb-role-switch;
|
port {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
dwc3_0_role_switch: endpoint@0 {
|
reg = <0>;
|
remote-endpoint = <&usbc0_role_sw>;
|
};
|
};
|
};
|
|
&usbhost3_0 {
|
status = "disabled";
|
};
|
|
&usbhost_dwc3_0 {
|
status = "disabled";
|
};
|
