// SPDX-License-Identifier: GPL-2.0-only
|
/*
|
* Common Device Tree Source for IGEP COM MODULE
|
*
|
* Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
|
* Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
|
*/
|
|
#include "omap3-igep.dtsi"
|
|
/ {
|
leds: gpio_leds {
|
compatible = "gpio-leds";
|
|
user0 {
|
label = "omap3:red:user0";
|
gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
|
default-state = "off";
|
};
|
|
user1 {
|
label = "omap3:green:user1";
|
gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
|
default-state = "off";
|
};
|
|
user2 {
|
label = "omap3:red:user1";
|
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* gpio_16 */
|
default-state = "off";
|
};
|
};
|
|
hsusb2_phy: hsusb2_phy {
|
compatible = "usb-nop-xceiv";
|
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
|
#phy-cells = <0>;
|
};
|
};
|
|
&omap3_pmx_core {
|
pinctrl-names = "default";
|
pinctrl-0 = <&hsusb2_pins>;
|
|
hsusb2_pins: pinmux_hsusb2_pins {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
|
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
|
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
|
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
|
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
|
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
|
>;
|
};
|
|
uart2_pins: pinmux_uart2_pins {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */
|
OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */
|
OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */
|
OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
|
>;
|
};
|
};
|
|
&omap3_pmx_core2 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&hsusb2_core2_pins>;
|
|
hsusb2_core2_pins: pinmux_hsusb2_core2_pins {
|
pinctrl-single,pins = <
|
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
|
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
|
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
|
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
|
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
|
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
|
>;
|
};
|
|
leds_core2_pins: pinmux_leds_core2_pins {
|
pinctrl-single,pins = <
|
OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
|
>;
|
};
|
};
|
|
&usbhshost {
|
port2-mode = "ehci-phy";
|
};
|
|
&usbhsehci {
|
phys = <0 &hsusb2_phy>;
|
};
|
|
&uart2 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart2_pins>;
|
};
|
|
&gpmc {
|
ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
|
};
|
