// SPDX-License-Identifier: GPL-2.0-only
|
/*
|
* Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
|
*/
|
|
#include "omap3-gta04.dtsi"
|
|
/ {
|
model = "Goldelico GTA04A5/Letux 2804";
|
|
sound {
|
ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
|
};
|
|
wlan_en: wlan_en_regulator {
|
compatible = "regulator-fixed";
|
pinctrl-names = "default";
|
pinctrl-0 = <&wlan_pins>;
|
regulator-name = "wlan-en-regulator";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
|
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
|
|
startup-delay-us = <70000>;
|
enable-active-high;
|
};
|
|
pps {
|
compatible = "pps-gpio";
|
pinctrl-names = "default";
|
pinctrl-0 = <&pps_pins>;
|
|
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
|
};
|
|
};
|
|
&gpio5 {
|
irda_en {
|
gpio-hog;
|
gpios = <(175-160) GPIO_ACTIVE_HIGH>;
|
output-high; /* activate gpio_175 to disable IrDA receiver */
|
};
|
};
|
|
&omap3_pmx_core {
|
bt_pins: pinmux_bt_pins {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */
|
>;
|
};
|
|
wlan_pins: pinmux_wlan_pins {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */
|
>;
|
};
|
|
wlan_irq_pin: pinmux_wlan_irq_pin {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */
|
>;
|
};
|
|
irda_pins: pinmux_irda {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */
|
>;
|
};
|
|
pps_pins: pinmux_pps_pins {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
|
>;
|
};
|
|
};
|
|
/*
|
* for WL183x module see
|
* Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
|
*/
|
|
&wifi_pwrseq {
|
/delete-property/ reset-gpios;
|
};
|
|
&mmc2 {
|
vmmc-supply = <&wlan_en>;
|
bus-width = <4>;
|
cap-power-off-card;
|
non-removable;
|
|
pinctrl-names = "default";
|
pinctrl-0 = <&wlan_irq_pin>;
|
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
/delete-property/ mmc-pwrseq;
|
|
wlcore: wlcore@2 {
|
compatible = "ti,wl1837";
|
reg = <2>;
|
interrupt-parent = <&gpio5>;
|
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */
|
ref-clock-frequency = <26000000>;
|
};
|
};
|
|
&i2c2 {
|
/delete-node/ bmp085@77;
|
/delete-node/ bma180@41;
|
/delete-node/ itg3200@68;
|
/delete-node/ hmc5843@1e;
|
|
bmg160@69 {
|
compatible = "bosch,bmg160";
|
reg = <0x69>;
|
};
|
|
bmc150@10 {
|
compatible = "bosch,bmc150_accel";
|
reg = <0x10>;
|
};
|
|
bmc150@12 {
|
compatible = "bosch,bmc150_magn";
|
reg = <0x12>;
|
};
|
|
bme280@76 {
|
compatible = "bosch,bme280";
|
reg = <0x76>;
|
};
|
};
|
