Kernel driver tmp401
|
====================
|
|
Supported chips:
|
|
* Texas Instruments TMP401
|
|
Prefix: 'tmp401'
|
|
Addresses scanned: I2C 0x4c
|
|
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html
|
|
* Texas Instruments TMP411
|
|
Prefix: 'tmp411'
|
|
Addresses scanned: I2C 0x4c, 0x4d, 0x4e
|
|
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html
|
|
* Texas Instruments TMP431
|
|
Prefix: 'tmp431'
|
|
Addresses scanned: I2C 0x4c, 0x4d
|
|
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp431.html
|
|
* Texas Instruments TMP432
|
|
Prefix: 'tmp432'
|
|
Addresses scanned: I2C 0x4c, 0x4d
|
|
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
|
|
* Texas Instruments TMP435
|
|
Prefix: 'tmp435'
|
|
Addresses scanned: I2C 0x48 - 0x4f
|
|
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
|
|
* Texas Instruments TMP461
|
|
Prefix: 'tmp461'
|
|
Datasheet: https://www.ti.com/product/tmp461
|
|
|
|
Authors:
|
|
- Hans de Goede <hdegoede@redhat.com>
|
- Andre Prendel <andre.prendel@gmx.de>
|
|
Description
|
-----------
|
|
This driver implements support for Texas Instruments TMP401, TMP411,
|
TMP431, TMP432, TMP435, and TMP461 chips. These chips implement one or two
|
remote and one local temperature sensors. Temperature is measured in degrees
|
Celsius. Resolution of the remote sensor is 0.0625 degree. Local
|
sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
|
supported by the driver so far, so using the default resolution of 0.5
|
degree).
|
|
The driver provides the common sysfs-interface for temperatures (see
|
Documentation/hwmon/sysfs-interface.rst under Temperatures).
|
|
The TMP411 and TMP431 chips are compatible with TMP401. TMP411 provides
|
some additional features.
|
|
* Minimum and Maximum temperature measured since power-on, chip-reset
|
|
Exported via sysfs attributes tempX_lowest and tempX_highest.
|
|
* Reset of historical minimum/maximum temperature measurements
|
|
Exported via sysfs attribute temp_reset_history. Writing 1 to this
|
file triggers a reset.
|
|
TMP432 is compatible with TMP401 and TMP431. It supports two external
|
temperature sensors.
|
|
TMP461 is compatible with TMP401. It supports offset correction
|
that is applied to the remote sensor.
|
|
* Sensor offset values are temperature values
|
|
Exported via sysfs attribute tempX_offset
|
