What: /sys/class/net/<iface>/qmi/raw_ip
|
Date: Dec 2015
|
KernelVersion: 4.4
|
Contact: Bjørn Mork <bjorn@mork.no>
|
Description:
|
Boolean. Default: 'N'
|
|
Set this to 'Y' to change the network device link
|
framing from '802.3' to 'raw-ip'.
|
|
The netdev will change to reflect the link framing
|
mode. The netdev is an ordinary ethernet device in
|
'802.3' mode, and the driver expects to exchange
|
frames with an ethernet header over the USB link. The
|
netdev is a headerless p-t-p device in 'raw-ip' mode,
|
and the driver expects to echange IPv4 or IPv6 packets
|
without any L2 header over the USB link.
|
|
Userspace is in full control of firmware configuration
|
through the delegation of the QMI protocol. Userspace
|
is responsible for coordination of driver and firmware
|
link framing mode, changing this setting to 'Y' if the
|
firmware is configured for 'raw-ip' mode.
|
|
What: /sys/class/net/<iface>/qmi/add_mux
|
Date: March 2017
|
KernelVersion: 4.11
|
Contact: Bjørn Mork <bjorn@mork.no>
|
Description:
|
Unsigned integer.
|
|
Write a number ranging from 1 to 254 to add a qmap mux
|
based network device, supported by recent Qualcomm based
|
modems.
|
|
The network device will be called qmimux.
|
|
Userspace is in charge of managing the qmux network device
|
activation and data stream setup on the modem side by
|
using the proper QMI protocol requests.
|
|
What: /sys/class/net/<iface>/qmi/del_mux
|
Date: March 2017
|
KernelVersion: 4.11
|
Contact: Bjørn Mork <bjorn@mork.no>
|
Description:
|
Unsigned integer.
|
|
Write a number ranging from 1 to 254 to delete a previously
|
created qmap mux based network device.
|
