hc
2023-11-22 f743a7adbd6e230d66a6206fa115b59fec2d88eb
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
/*
 * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
 *
 *  Copyright (C) 2012 Atmel,
 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
 *
 * Licensed under GPLv2 or later.
 */
 
/ {
   memory {
       reg = <0x20000000 0x8000000>;
   };
 
   clocks {
       slow_xtal {
           clock-frequency = <32768>;
       };
 
       main_xtal {
           clock-frequency = <12000000>;
       };
   };
 
   ahb {
       apb {
           pinctrl@fffff400 {
               1wire_cm {
                   pinctrl_1wire_cm: 1wire_cm-0 {
                       atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
                   };
               };
           };
 
           rtc@fffffeb0 {
               status = "okay";
           };
       };
 
       nand0: nand@40000000 {
           nand-bus-width = <8>;
           nand-ecc-mode = "hw";
           atmel,has-pmecc;    /* Enable PMECC */
           atmel,pmecc-cap = <2>;
           atmel,pmecc-sector-size = <512>;
           nand-on-flash-bbt;
           status = "okay";
 
           at91bootstrap@0 {
               label = "at91bootstrap";
               reg = <0x0 0x40000>;
           };
 
           uboot@40000 {
               label = "u-boot";
               reg = <0x40000 0x80000>;
           };
 
           ubootenv@c0000 {
               label = "U-Boot Env";
               reg = <0xc0000 0x140000>;
           };
 
           kernel@200000 {
               label = "kernel";
               reg = <0x200000 0x600000>;
           };
 
           rootfs@800000 {
               label = "rootfs";
               reg = <0x800000 0x1f800000>;
           };
       };
   };
 
   leds {
       compatible = "gpio-leds";
 
       pb18 {
           label = "pb18";
           gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
           linux,default-trigger = "heartbeat";
       };
 
       pd21 {
           label = "pd21";
           gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
       };
   };
 
   1wire_cm {
       compatible = "w1-gpio";
       gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
       linux,open-drain;
       pinctrl-names = "default";
       pinctrl-0 = <&pinctrl_1wire_cm>;
       status = "okay";
   };
 
};