// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
/*
|
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
*
|
*/
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
#include <dt-bindings/pwm/pwm.h>
|
#include <dt-bindings/pinctrl/rockchip.h>
|
#include <dt-bindings/input/rk-input.h>
|
#include <dt-bindings/display/drm_mipi_dsi.h>
|
#include <dt-bindings/sensor-dev.h>
|
#include "rk3568.dtsi"
|
|
/ {
|
model = "Rockchip RK630 RK3568 DDR3 V10 Board";
|
compatible = "rockchip,rk630-rk3568-ddr3-v10", "rockchip,rk3568";
|
|
chosen: chosen {
|
bootargs = "earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rw rootwait";
|
};
|
|
fiq-debugger {
|
compatible = "rockchip,fiq-debugger";
|
rockchip,serial-id = <2>;
|
rockchip,wake-irq = <0>;
|
/* If enable uart uses irq instead of fiq */
|
rockchip,irq-mode-enable = <1>;
|
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
|
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_LOW>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart2m0_xfer>;
|
status = "okay";
|
};
|
|
debug: debug@fd904000 {
|
compatible = "rockchip,debug";
|
reg = <0x0 0xfd904000 0x0 0x1000>,
|
<0x0 0xfd905000 0x0 0x1000>,
|
<0x0 0xfd906000 0x0 0x1000>,
|
<0x0 0xfd907000 0x0 0x1000>;
|
};
|
|
cspmu: cspmu@fd90c000 {
|
compatible = "rockchip,cspmu";
|
reg = <0x0 0xfd90c000 0x0 0x1000>,
|
<0x0 0xfd90d000 0x0 0x1000>,
|
<0x0 0xfd90e000 0x0 0x1000>,
|
<0x0 0xfd90f000 0x0 0x1000>;
|
};
|
|
adc_keys: adc-keys {
|
compatible = "adc-keys";
|
io-channels = <&saradc 0>;
|
io-channel-names = "buttons";
|
keyup-threshold-microvolt = <1800000>;
|
poll-interval = <100>;
|
|
vol-up-key {
|
label = "volume up";
|
linux,code = <KEY_VOLUMEUP>;
|
press-threshold-microvolt = <1750>;
|
};
|
};
|
|
dc_12v: dc-12v {
|
compatible = "regulator-fixed";
|
regulator-name = "dc_12v";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <12000000>;
|
regulator-max-microvolt = <12000000>;
|
};
|
|
rk630_sound: rk630-sound {
|
status = "okay";
|
compatible = "simple-audio-card";
|
simple-audio-card,format = "i2s";
|
simple-audio-card,name = "rockchip,rk630-codec";
|
simple-audio-card,mclk-fs = <256>;
|
simple-audio-card,cpu {
|
sound-dai = <&i2s1_8ch>;
|
};
|
simple-audio-card,codec {
|
sound-dai = <&rk630_codec>;
|
};
|
};
|
|
vcc3v3_sys: vcc3v3-sys {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3_sys";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
vin-supply = <&dc_12v>;
|
};
|
|
vcc5v0_sys: vcc5v0-sys {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_sys";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
vin-supply = <&dc_12v>;
|
};
|
|
vcc5v0_usb: vcc5v0-usb {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_usb";
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
vin-supply = <&dc_12v>;
|
};
|
|
vcc5v0_host: vcc5v0-host-regulator {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_host";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
vin-supply = <&vcc5v0_usb>;
|
};
|
|
vcc5v0_otg: vcc5v0-otg-regulator {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc5v0_otg";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
vin-supply = <&vcc5v0_usb>;
|
};
|
|
vcc3v3_lcd0_n: vcc3v3-lcd0-n {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3_lcd0_n";
|
regulator-boot-on;
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
enable-active-high;
|
gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc3v3_sys>;
|
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vcc3v3_lcd1_n: vcc3v3-lcd1-n {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3_lcd1_n";
|
regulator-boot-on;
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
enable-active-high;
|
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc3v3_sys>;
|
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
sdio_pwrseq: sdio-pwrseq {
|
compatible = "mmc-pwrseq-simple";
|
clocks = <&pmucru CLK_RTC_32K>;
|
clock-names = "ext_clock";
|
pinctrl-names = "default";
|
pinctrl-0 = <&wifi_enable_h &wifi_32k>;
|
|
/*
|
* On the module itself this is one of these (depending
|
* on the actual card populated):
|
* - SDIO_RESET_L_WL_REG_ON
|
* - PDN (power down when low)
|
*/
|
post-power-on-delay-ms = <200>;
|
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
};
|
|
wireless_wlan: wireless-wlan {
|
compatible = "wlan-platdata";
|
rockchip,grf = <&grf>;
|
wifi_chip_type = "ap6398s";
|
status = "okay";
|
};
|
|
wireless_bluetooth: wireless-bluetooth {
|
compatible = "bluetooth-platdata";
|
clocks = <&pmucru CLK_RTC_32K>;
|
clock-names = "ext_clock";
|
uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default", "rts_gpio";
|
pinctrl-0 = <&uart1m0_rtsn>;
|
pinctrl-1 = <&uart1_gpios>;
|
BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
BT,wake_gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
BT,wake_host_irq = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
};
|
|
&reserved_memory {
|
ramoops: ramoops@110000 {
|
compatible = "ramoops";
|
reg = <0x0 0x110000 0x0 0xf0000>;
|
record-size = <0x20000>;
|
console-size = <0x80000>;
|
ftrace-size = <0x00000>;
|
pmsg-size = <0x50000>;
|
};
|
};
|
|
&cpu0 {
|
cpu-supply = <&vdd_cpu>;
|
};
|
|
&dfi {
|
status = "okay";
|
};
|
|
&dmc {
|
center-supply = <&vdd_logic>;
|
status = "okay";
|
};
|
|
&gmac1_clkin {
|
clock-frequency = <50000000>;
|
};
|
|
&gmac1 {
|
phy-mode = "rmii";
|
clock_in_out = "input";
|
|
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
assigned-clock-parents = <&cru SCLK_GMAC1_RMII_SPEED>, <&gmac1_clkin>;
|
|
pinctrl-names = "default";
|
pinctrl-0 = <&gmac1m1_miim
|
&gmac1m1_tx_bus2
|
&gmac1m1_rx_bus2
|
&gmac1m1_clkinout>;
|
|
phy-handle = <&rmii_phy1>;
|
status = "okay";
|
};
|
|
&gpu {
|
mali-supply = <&vdd_gpu>;
|
status = "okay";
|
};
|
|
&i2c0 {
|
status = "okay";
|
|
vdd_cpu: tcs4525@1c {
|
compatible = "tcs,tcs452x";
|
reg = <0x1c>;
|
vin-supply = <&vcc5v0_sys>;
|
regulator-compatible = "fan53555-reg";
|
regulator-name = "vdd_cpu";
|
regulator-min-microvolt = <712500>;
|
regulator-max-microvolt = <1390000>;
|
regulator-init-microvolt = <900000>;
|
regulator-ramp-delay = <2300>;
|
fcs,suspend-voltage-selector = <1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
rk809: pmic@20 {
|
compatible = "rockchip,rk809";
|
reg = <0x20>;
|
interrupt-parent = <&gpio0>;
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default", "pmic-sleep",
|
"pmic-power-off", "pmic-reset";
|
pinctrl-0 = <&pmic_int>;
|
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
|
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
|
|
rockchip,system-power-controller;
|
wakeup-source;
|
#clock-cells = <1>;
|
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
/* 1: rst regs (default in codes), 0: rst the pmic */
|
pmic-reset-func = <0>;
|
/* not save the PMIC_POWER_EN register in uboot */
|
not-save-power-en = <1>;
|
|
vcc1-supply = <&vcc3v3_sys>;
|
vcc2-supply = <&vcc3v3_sys>;
|
vcc3-supply = <&vcc3v3_sys>;
|
vcc4-supply = <&vcc3v3_sys>;
|
vcc5-supply = <&vcc3v3_sys>;
|
vcc6-supply = <&vcc3v3_sys>;
|
vcc7-supply = <&vcc3v3_sys>;
|
vcc8-supply = <&vcc3v3_sys>;
|
vcc9-supply = <&vcc3v3_sys>;
|
|
pwrkey {
|
status = "okay";
|
};
|
|
pinctrl_rk8xx: pinctrl_rk8xx {
|
gpio-controller;
|
#gpio-cells = <2>;
|
|
rk817_slppin_null: rk817_slppin_null {
|
pins = "gpio_slp";
|
function = "pin_fun0";
|
};
|
|
rk817_slppin_slp: rk817_slppin_slp {
|
pins = "gpio_slp";
|
function = "pin_fun1";
|
};
|
|
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
pins = "gpio_slp";
|
function = "pin_fun2";
|
};
|
|
rk817_slppin_rst: rk817_slppin_rst {
|
pins = "gpio_slp";
|
function = "pin_fun3";
|
};
|
};
|
|
regulators {
|
vdd_logic: DCDC_REG1 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <500000>;
|
regulator-max-microvolt = <1350000>;
|
regulator-init-microvolt = <900000>;
|
regulator-ramp-delay = <6001>;
|
regulator-initial-mode = <0x2>;
|
regulator-name = "vdd_logic";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vdd_gpu: DCDC_REG2 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <500000>;
|
regulator-max-microvolt = <1350000>;
|
regulator-init-microvolt = <900000>;
|
regulator-ramp-delay = <6001>;
|
regulator-initial-mode = <0x2>;
|
regulator-name = "vdd_gpu";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vcc_ddr: DCDC_REG3 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-initial-mode = <0x2>;
|
regulator-name = "vcc_ddr";
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
};
|
};
|
|
vdd_npu: DCDC_REG4 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <500000>;
|
regulator-max-microvolt = <1350000>;
|
regulator-init-microvolt = <900000>;
|
regulator-ramp-delay = <6001>;
|
regulator-initial-mode = <0x2>;
|
regulator-name = "vdd_npu";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vdda0v9_image: LDO_REG1 {
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <900000>;
|
regulator-max-microvolt = <900000>;
|
regulator-name = "vdda0v9_image";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vdda_0v9: LDO_REG2 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <900000>;
|
regulator-max-microvolt = <900000>;
|
regulator-name = "vdda_0v9";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vdda0v9_pmu: LDO_REG3 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <900000>;
|
regulator-max-microvolt = <900000>;
|
regulator-name = "vdda0v9_pmu";
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <900000>;
|
};
|
};
|
|
vccio_acodec: LDO_REG4 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-name = "vccio_acodec";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vccio_sd: LDO_REG5 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-name = "vccio_sd";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vcc3v3_pmu: LDO_REG6 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-name = "vcc3v3_pmu";
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <3300000>;
|
};
|
};
|
|
vcca_1v8: LDO_REG7 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-name = "vcca_1v8";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vcca1v8_pmu: LDO_REG8 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-name = "vcca1v8_pmu";
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <1800000>;
|
};
|
};
|
|
vcca1v8_image: LDO_REG9 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-name = "vcca1v8_image";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vcc_1v8: DCDC_REG5 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-name = "vcc_1v8";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vcc_3v3: SWITCH_REG1 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-name = "vcc_3v3";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
|
vcc3v3_sd: SWITCH_REG2 {
|
regulator-always-on;
|
regulator-boot-on;
|
regulator-name = "vcc3v3_sd";
|
regulator-state-mem {
|
regulator-off-in-suspend;
|
};
|
};
|
};
|
};
|
};
|
|
&i2c3 {
|
status = "okay";
|
|
rk630: rk630@51 {
|
reg = <0x51>;
|
interrupt-parent = <&gpio0>;
|
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
|
clocks = <&cru CLK_MAC1_OUT>;
|
clock-names = "ref";
|
assigned-clocks = <&cru CLK_MAC1_OUT>;
|
assigned-clock-rates = <25000000>;
|
pinctrl-names = "default";
|
pinctrl-0 = <ð1m1_pins>;
|
status = "okay";
|
};
|
};
|
|
&i2s1_8ch {
|
status = "okay";
|
#sound-dai-cells = <0>;
|
rockchip,clk-trcm = <1>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2s1m0_sclktx
|
&i2s1m0_lrcktx
|
&i2s1m0_sdi0
|
&i2s1m0_sdo0>;
|
};
|
|
#include "rk630.dtsi"
|
|
&mdio1 {
|
rmii_phy1: phy@1 {
|
compatible = "ethernet-phy-id0044.1400", "ethernet-phy-ieee802.3-c22";
|
reg = <0x1>;
|
};
|
};
|
|
&pinctrl {
|
pmic {
|
pmic_int: pmic_int {
|
rockchip,pins =
|
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
|
soc_slppin_gpio: soc_slppin_gpio {
|
rockchip,pins =
|
<0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>;
|
};
|
|
soc_slppin_slp: soc_slppin_slp {
|
rockchip,pins =
|
<0 RK_PA2 1 &pcfg_pull_up>;
|
};
|
|
soc_slppin_rst: soc_slppin_rst {
|
rockchip,pins =
|
<0 RK_PA2 2 &pcfg_pull_none>;
|
};
|
};
|
|
sdio-pwrseq {
|
wifi_enable_h: wifi-enable-h {
|
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
|
wifi_32k: wifi-32k {
|
rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
|
};
|
};
|
|
wireless-wlan {
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
};
|
};
|
|
wireless-bluetooth {
|
uart1_gpios: uart1-gpios {
|
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
};
|
|
/*
|
* There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7].
|
* 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured;
|
* 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages
|
* must be consistent with the software configuration correspondingly
|
* a/ When the hardware IO level is connected to 1.8V, the software voltage configuration
|
* should also be configured to 1.8V accordingly;
|
* b/ When the hardware IO level is connected to 3.3V, the software voltage configuration
|
* should also be configured to 3.3V accordingly;
|
* 3/ VCCIO2 voltage control selection (0xFDC20140)
|
* BIT[0]: 0x0: from GPIO_0A7 (default)
|
* BIT[0]: 0x1: from GRF
|
* Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7:
|
* L:VCCIO2 must supply 3.3V
|
* H:VCCIO2 must supply 1.8V
|
*/
|
&pmu_io_domains {
|
status = "okay";
|
pmuio2-supply = <&vcc3v3_pmu>;
|
vccio1-supply = <&vccio_acodec>;
|
vccio3-supply = <&vccio_sd>;
|
vccio4-supply = <&vcc_1v8>;
|
vccio5-supply = <&vcc_3v3>;
|
vccio6-supply = <&vcc_3v3>;
|
vccio7-supply = <&vcc_3v3>;
|
};
|
|
&rk630_codec {
|
status = "okay";
|
#sound-dai-cells = <0>;
|
compatible = "rockchip,rk630-codec";
|
clocks = <&cru I2S1_MCLKOUT>;
|
clock-names = "mclk";
|
assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>;
|
assigned-clock-rates = <11289600>;
|
assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2s1m0_mclk>;
|
spk-ctl-gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>;
|
capture_volume = <31>;
|
hp_volume = <26>;
|
spk_volume = <26>;
|
gpio_debug;
|
};
|
|
&rk630_macphy {
|
status = "okay";
|
};
|
|
&saradc {
|
status = "okay";
|
vref-supply = <&vcca_1v8>;
|
};
|
|
&sdhci {
|
bus-width = <8>;
|
supports-emmc;
|
non-removable;
|
max-frequency = <200000000>;
|
status = "okay";
|
};
|
|
&sfc {
|
status = "okay";
|
};
|
|
&tsadc {
|
status = "okay";
|
};
|
|
&sdmmc1 {
|
max-frequency = <150000000>;
|
supports-sdio;
|
bus-width = <4>;
|
disable-wp;
|
cap-sd-highspeed;
|
cap-sdio-irq;
|
keep-power-in-suspend;
|
mmc-pwrseq = <&sdio_pwrseq>;
|
non-removable;
|
pinctrl-names = "default";
|
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
sd-uhs-sdr104;
|
status = "okay";
|
};
|
|
&uart1 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
};
|
|
&wireless_wlan {
|
pinctrl-names = "default";
|
pinctrl-0 = <&wifi_host_wake_irq>;
|
WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
|
};
|
|
&u2phy0_host {
|
phy-supply = <&vcc5v0_host>;
|
status = "okay";
|
};
|
|
&u2phy0_otg {
|
vbus-supply = <&vcc5v0_otg>;
|
status = "okay";
|
};
|
|
&u2phy1_host {
|
phy-supply = <&vcc5v0_host>;
|
status = "disabled";
|
};
|
|
&u2phy1_otg {
|
phy-supply = <&vcc5v0_host>;
|
status = "disabled";
|
};
|
|
&usb2phy0 {
|
status = "okay";
|
};
|
|
&usb2phy1 {
|
status = "disabled";
|
};
|
|
&usb_host0_ehci {
|
status = "disabled";
|
};
|
|
&usb_host0_ohci {
|
status = "disabled";
|
};
|
|
&usb_host1_ehci {
|
status = "disabled";
|
};
|
|
&usb_host1_ohci {
|
status = "disabled";
|
};
|
|
&usbdrd_dwc3 {
|
phys = <&u2phy0_otg>;
|
phy-names = "usb2-phy";
|
extcon = <&usb2phy0>;
|
maximum-speed = "high-speed";
|
snps,dis_u2_susphy_quirk;
|
status = "okay";
|
};
|
|
&usbdrd30 {
|
status = "okay";
|
};
|
|
&usbhost30 {
|
status = "okay";
|
};
|
|
&combphy0_us {
|
rockchip,dis-u3otg0-port;
|
status = "okay";
|
};
|
|
&combphy1_usq {
|
rockchip,dis-u3otg1-port;
|
status = "okay";
|
};
|
|
&combphy2_psq {
|
status = "disabled";
|
};
|
|
&usbhost_dwc3 {
|
phys = <&u2phy0_host>;
|
phy-names = "usb2-phy";
|
maximum-speed = "high-speed";
|
status = "okay";
|
};
|
|
&xin32k {
|
status = "disabled";
|
};
|
