hc
2023-11-07 f45e756958099c35d6afb746df1d40a1c6302cfc
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
/*
 * Copyright (C) 2013 Seco S.r.l
 *
 * Configuration settings for the Seco Boards.
 *
 * SPDX-License-Identifier:    GPL-2.0+
 */
 
#ifndef __CONFIG_H
#define __CONFIG_H
 
#include "mx6_common.h"
 
#define CONFIG_BOARD_REVISION_TAG
 
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN        (10 * SZ_1M)
 
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE        UART2_BASE
 
#define CONFIG_SYS_MEMTEST_START    0x10000000
#define CONFIG_SYS_MEMTEST_END        (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
 
/* MMC Configuration */
#define CONFIG_SYS_FSL_USDHC_NUM        2
#define CONFIG_SYS_FSL_ESDHC_ADDR    0
 
/* Ethernet Configuration */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE            ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE        RGMII
#define CONFIG_ETHPRIME            "FEC"
#define CONFIG_FEC_MXC_PHYADDR        6
 
#define CONFIG_EXTRA_ENV_SETTINGS                    \
   "netdev=eth0\0"                            \
   "ethprime=FEC0\0"                        \
   "netdev=eth0\0"                            \
   "ethprime=FEC0\0"                        \
   "uboot=u-boot.bin\0"                        \
   "kernel=uImage\0"                        \
   "nfsroot=/opt/eldk/arm\0"                    \
   "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0"        \
   "ip_server=10.0.0.1\0"                        \
   "nfs_path=/targetfs \0"                        \
   "memory=mem=1024M\0"                        \
   "bootdev=mmc dev 0; ext2load mmc 0:1\0"                \
   "root=root=/dev/mmcblk0p1\0"                    \
   "option=rootwait rw fixrtc rootflags=barrier=1\0"        \
   "cpu_freq=arm_freq=996\0"                    \
   "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}"    \
       " ${option} ${memory} ${cpu_freq}\0"            \
   "setbootargs_nfs=setenv bootargs console=ttymxc1,115200"    \
       " root=/dev/nfs  nfsroot=${ip_server}:${nfs_path}"    \
       " nolock,wsize=4096,rsize=4096  ip=:::::eth0:dhcp"    \
       " ${memory} ${cpu_freq}\0"                \
   "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0"    \
   "bootcmd=run setbootargs; run setbootdev; run boot_dev;"    \
       " bootm 0x10800000\0"                    \
   "stdin=serial\0"                        \
   "stdout=serial\0"                        \
   "stderr=serial\0"
 
#define CONFIG_SYS_HZ            1000
 
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS        1
#define PHYS_SDRAM            MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE            (2u * 1024 * 1024 * 1024)
 
#define CONFIG_SYS_SDRAM_BASE        PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR    IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE    IRAM_SIZE
 
#define CONFIG_SYS_INIT_SP_OFFSET    \
   (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR        \
   (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
/* Environment organization */
#define CONFIG_ENV_SIZE            (8 * 1024)
 
#if defined(CONFIG_ENV_IS_IN_MMC)
   #define CONFIG_ENV_OFFSET        (6 * 128 * 1024)
   #define CONFIG_SYS_MMC_ENV_DEV        0
   #define CONFIG_DYNAMIC_MMC_DEVNO
#endif
 
#endif /* __CONFIG_H */