/*
|
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
|
*
|
* Based on davinci_dvevm.h. Original Copyrights follow:
|
*
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
*
|
* SPDX-License-Identifier: GPL-2.0
|
*/
|
|
#ifndef __CONFIG_H
|
#define __CONFIG_H
|
|
/*
|
* Board
|
*/
|
#define CONFIG_DRIVER_TI_EMAC
|
#undef CONFIG_USE_SPIFLASH
|
#undef CONFIG_SYS_USE_NOR
|
#define CONFIG_USE_NAND
|
|
/*
|
* SoC Configuration
|
*/
|
#define CONFIG_MACH_OMAPL138_LCDK
|
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
|
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
|
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
|
#define CONFIG_SYS_OSCIN_FREQ 24000000
|
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
|
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
|
#define CONFIG_SYS_HZ 1000
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
#define CONFIG_SYS_TEXT_BASE 0xc1080000
|
|
/*
|
* Memory Info
|
*/
|
#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
|
#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
|
#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */
|
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
|
|
/* memtest start addr */
|
#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
|
|
/* memtest will be run on 16MB */
|
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
|
DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
|
DAVINCI_SYSCFG_SUSPSRC_SPI1 | \
|
DAVINCI_SYSCFG_SUSPSRC_UART2 | \
|
DAVINCI_SYSCFG_SUSPSRC_EMAC | \
|
DAVINCI_SYSCFG_SUSPSRC_I2C)
|
|
/*
|
* PLL configuration
|
*/
|
#define CONFIG_SYS_DV_CLKMODE 0
|
#define CONFIG_SYS_DA850_PLL0_POSTDIV 1
|
#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000
|
#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001
|
#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002
|
#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003
|
#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002
|
#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1
|
#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005
|
|
#define CONFIG_SYS_DA850_PLL1_POSTDIV 1
|
#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000
|
#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001
|
#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8003
|
|
#define CONFIG_SYS_DA850_PLL0_PLLM 37
|
#define CONFIG_SYS_DA850_PLL1_PLLM 21
|
|
/*
|
* DDR2 memory configuration
|
*/
|
#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
|
DV_DDR_PHY_EXT_STRBEN | \
|
(0x5 << DV_DDR_PHY_RD_LATENCY_SHIFT))
|
|
#define CONFIG_SYS_DA850_DDR2_SDBCR ( \
|
(1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \
|
(1 << DV_DDR_SDCR_DDREN_SHIFT) | \
|
(1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \
|
(1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \
|
(4 << DV_DDR_SDCR_CL_SHIFT) | \
|
(3 << DV_DDR_SDCR_IBANK_SHIFT) | \
|
(2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
|
|
/* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
|
#define CONFIG_SYS_DA850_DDR2_SDBCR2 0
|
|
#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \
|
(19 << DV_DDR_SDTMR1_RFC_SHIFT) | \
|
(1 << DV_DDR_SDTMR1_RP_SHIFT) | \
|
(1 << DV_DDR_SDTMR1_RCD_SHIFT) | \
|
(2 << DV_DDR_SDTMR1_WR_SHIFT) | \
|
(6 << DV_DDR_SDTMR1_RAS_SHIFT) | \
|
(8 << DV_DDR_SDTMR1_RC_SHIFT) | \
|
(1 << DV_DDR_SDTMR1_RRD_SHIFT) | \
|
(1 << DV_DDR_SDTMR1_WTR_SHIFT))
|
|
#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \
|
(7 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \
|
(2 << DV_DDR_SDTMR2_XP_SHIFT) | \
|
(0 << DV_DDR_SDTMR2_ODT_SHIFT) | \
|
(20 << DV_DDR_SDTMR2_XSNR_SHIFT) | \
|
(199 << DV_DDR_SDTMR2_XSRD_SHIFT) | \
|
(1 << DV_DDR_SDTMR2_RTP_SHIFT) | \
|
(2 << DV_DDR_SDTMR2_CKE_SHIFT))
|
|
#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000492
|
#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30
|
|
/*
|
* Serial Driver info
|
*/
|
#define CONFIG_SYS_NS16550_SERIAL
|
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
|
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
|
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
|
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
|
#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
|
#ifdef CONFIG_USE_SPIFLASH
|
#define CONFIG_SPL_SPI_LOAD
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
|
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000
|
#endif
|
|
/*
|
* I2C Configuration
|
*/
|
#define CONFIG_SYS_I2C
|
#define CONFIG_SYS_I2C_DAVINCI
|
#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000
|
#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
|
#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20
|
|
/*
|
* Flash & Environment
|
*/
|
#ifdef CONFIG_USE_NAND
|
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
|
#define CONFIG_ENV_SIZE (128 << 9)
|
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
|
#define CONFIG_SYS_NAND_PAGE_2K
|
#define CONFIG_SYS_NAND_CS 3
|
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
|
#define CONFIG_SYS_NAND_MASK_CLE 0x10
|
#define CONFIG_SYS_NAND_MASK_ALE 0x8
|
#undef CONFIG_SYS_NAND_HW_ECC
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
|
#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10)
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
|
#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
|
#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
|
CONFIG_SYS_NAND_U_BOOT_SIZE - \
|
CONFIG_SYS_MALLOC_LEN - \
|
GENERATED_GBL_DATA_SIZE)
|
#define CONFIG_SYS_NAND_ECCPOS { \
|
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \
|
22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \
|
38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
|
54, 55, 56, 57, 58, 59, 60, 61, 62, 63 }
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
#define CONFIG_SYS_NAND_ECCBYTES 10
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
#define CONFIG_SPL_NAND_BASE
|
#define CONFIG_SPL_NAND_DRIVERS
|
#define CONFIG_SPL_NAND_ECC
|
#define CONFIG_SPL_NAND_LOAD
|
#endif
|
|
#ifdef CONFIG_SYS_USE_NOR
|
#define CONFIG_FLASH_CFI_DRIVER
|
#define CONFIG_SYS_FLASH_CFI
|
#define CONFIG_SYS_FLASH_PROTECTION
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
|
#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */
|
#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3)
|
#define CONFIG_ENV_SIZE (128 << 10)
|
#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
|
#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */
|
#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
|
+ 3)
|
#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ
|
#endif
|
|
#ifdef CONFIG_USE_SPIFLASH
|
#define CONFIG_ENV_SIZE (64 << 10)
|
#define CONFIG_ENV_OFFSET (256 << 10)
|
#define CONFIG_ENV_SECT_SIZE (64 << 10)
|
#endif
|
|
/*
|
* Network & Ethernet Configuration
|
*/
|
#ifdef CONFIG_DRIVER_TI_EMAC
|
#define CONFIG_MII
|
#undef CONFIG_DRIVER_TI_EMAC_USE_RMII
|
#define CONFIG_BOOTP_DEFAULT
|
#define CONFIG_BOOTP_DNS
|
#define CONFIG_BOOTP_DNS2
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
#define CONFIG_NET_RETRY_COUNT 10
|
#endif
|
|
/*
|
* U-Boot general configuration
|
*/
|
#define CONFIG_MISC_INIT_R
|
#define CONFIG_BOOTFILE "zImage" /* Boot file name */
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
|
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
|
#define CONFIG_AUTO_COMPLETE
|
#define CONFIG_CMDLINE_EDITING
|
#define CONFIG_SYS_LONGHELP
|
#define CONFIG_MX_CYCLIC
|
|
/*
|
* Linux Information
|
*/
|
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
|
#define CONFIG_CMDLINE_TAG
|
#define CONFIG_REVISION_TAG
|
#define CONFIG_SETUP_MEMORY_TAGS
|
#define CONFIG_BOOTCOMMAND \
|
"run envboot; " \
|
"run mmcboot; "
|
|
#define DEFAULT_LINUX_BOOT_ENV \
|
"loadaddr=0xc0700000\0" \
|
"fdtaddr=0xc0600000\0" \
|
"scriptaddr=0xc0600000\0"
|
|
#include <environment/ti/mmc.h>
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
DEFAULT_LINUX_BOOT_ENV \
|
DEFAULT_MMC_TI_ARGS \
|
"bootpart=0:2\0" \
|
"bootdir=/boot\0" \
|
"bootfile=zImage\0" \
|
"fdtfile=da850-lcdk.dtb\0" \
|
"boot_fdt=yes\0" \
|
"boot_fit=0\0" \
|
"console=ttyS2,115200n8\0"
|
|
#ifdef CONFIG_CMD_BDI
|
#define CONFIG_CLOCKS
|
#endif
|
|
#if !defined(CONFIG_NAND) && \
|
!defined(CONFIG_SYS_USE_NOR) && \
|
!defined(CONFIG_USE_SPIFLASH)
|
#define CONFIG_ENV_SIZE (16 << 10)
|
#endif
|
|
/* SD/MMC */
|
|
#ifdef CONFIG_ENV_IS_IN_MMC
|
#undef CONFIG_ENV_SIZE
|
#undef CONFIG_ENV_OFFSET
|
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
|
#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */
|
#endif
|
|
#ifndef CONFIG_DIRECT_NOR_BOOT
|
/* defines for SPL */
|
#define CONFIG_SPL_FRAMEWORK
|
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
|
CONFIG_SYS_MALLOC_LEN)
|
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
|
#define CONFIG_SPL_STACK 0x8001ff00
|
#define CONFIG_SPL_TEXT_BASE 0x80000000
|
#define CONFIG_SPL_MAX_FOOTPRINT 32768
|
#define CONFIG_SPL_PAD_TO 32768
|
#endif
|
|
/* additions for new relocation code, must added to all boards */
|
#define CONFIG_SYS_SDRAM_BASE 0xc0000000
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
|
GENERATED_GBL_DATA_SIZE)
|
|
#include <asm/arch/hardware.h>
|
|
#endif /* __CONFIG_H */
|
